Tender For Construction Of Marriage Hall In Nagar Palika Parishad Samthar - Excavation in Foundation in ordinary soil including lift upto 1.5 metre and lead upto 30 m and including filling watering and ramping of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in- Charge upto a distance of 30 m from the foundation trenches. 3 Clearing jungle including uprooting of vegetation grass,bush,wood trees upto 30 cm. measured at a height of 1 metre above ground level and removal of rubush upto a distance of 50 m outside the perophery of area cleared. 4 Earth work in cutting or in filling in ordinary soil excavation to be in the form of regular pits not exceeding 1/2 metre 20 in depth andd earthwork in embankment to be in 20 cm layers including ramming and dressing the surface to required level and slopes and also including 1.5 metre lift and 30 m lead the earth from cutting to be used in making filling or to be deposited as spoil bank within 30 metres distance as directed by engineer in charge. 5 Sand filling in plinth including suppty ofnecessary quantity of sand from adistance not exceeding 8 km.(5 miles)from the site of work and includingwatering, dressing etc. Rate to includingcost of all materials , labour and T&p etc. 6 Cement concrete with 4 cm gauge approved stone ballast approved coaarse sand and cement in the proportion of 8:4:1 incluning supply of all materials labour and T&P etc. required for proper completion of the work 7 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) 8 providing and laying Autoclaved Aerated Concrete (AAC)/Autoclaved Concrete (ACC) blocks masonary 100mm/ 125mm tthick with Grade 1AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 in super structure above plinth level up to floor V level in cement mortar 1:4. the rate includes providing and placing in positing 2 Nos.6 mm Dia M.S. Bars At every third course of masonry work. 9 half brick masonry with common burnt clay FPS bricks of class designation 7.5 in superstructure above plinth level up to floor v level. 10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 11 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:1791 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. 12 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 13 Providing and laying in position machine batched and machine mixed design mix 1:1.5:3 cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:1791 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. 14 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 15 Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturers specifications (i) In foundation pits, by treating the bottom & sides upto height of 300mm by uniformly spraying solution @ 5 Litre / Sqm (ii) In the refill earth on both sides of all built up walls @ 7.5 Litre / Running meter ( width - 300 mm, depth - 450 mm ) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5Litre solution per Sqm. 16 15 mm thick cement plaster 1:6 in two coats work in external plaster 17 12.5 mm thick cement plaster 1:4 in internal plaster 18 Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm,which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). 19 Providing and laying Marble stone flooring with 18 mm thick, rissers of steps ,skirting ,dado 10 mm thick in base of cement mortar 1:4 laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including polishing complete. 20 Providing and laying kota slab 20 mm flooring, rissers of steps ,skirting ,dado 10 mm thick in base of cement mortar 1:4 laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including polishing complete. 21 Providing and laying of 8 mm to 10 mm thick ivory or light shadr vitrified tiles of 600 mm x 600 mm size inflooring, skirting in base of cement mortar 1:4 laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including polishing complete. 22 Providing and laying 5 mm thick kajaria tiles in flooring, rissers of steps ,skirting ,dado 10 mm thick in base of cement mortar 1:4 laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including polishing complete. 23 Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade 24 Providing and applying Plaster of Paris Putty of 2 mm thickness over plastered surface to prepare the surface. 25 Finishing wall with water proofing cement paint of approved make and quality on new work with two coat give an even shade. 26 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 27 Supply of MS Angle iron door ,windows ,ventilation frame made of approved M.S angle iron wroght to required from including drilling hole, welding and recetting where necessary complete in all repect as perdirection of work at site of work. 28 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :(Flat back wash basin of size 550x400 mm) 29 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 30 White glazed earthenware european type wc pan with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fitting and ci brackets 40 mm flush bend overflow arrangement with specials of standard make it complete. 31 Providing anf fixing 8 mm dia C.P/ S.S jet with Flexible tube upto 1 metre long with S.S triangular plate to european type WC of Quality and make as approved by Engineer in charge. 32 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete.10 litre capacity - range of four urinals basins with white PVC automatic Flushing Cistern. 33 Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. 34 providing and fixing toilet paper holder 35 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 36 Providing and fixing C.P. brass angle valve of approved quality conforming to IS:8931 : 37 Providing and fixing stainless steel A ISI 304 kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40 mm including pianting of fittings and bracket ,cutting and making good the walls wherever required kitchen sink without drain board 610 x 5110 mm bowl depth 200 mm 38 Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. Single Tee with Door 39 Door Elbow 90 degree 40 Coupler 41 Vent Cowl 42 Elbow 90 degree (all side socket) 43 Nahani trap without jali 110mmx90mm 44 P Trap/Floor Trap 110mm x 110mm 45 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm 46 Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 100mm o/d pipe of 10kgf./sqcm 47 Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 150mm o/d pipe of 10 Kgf. / sqcm 48 Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.Inside size 75x120 cm and 120 cm deep 49 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 50 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. CPVC SDR 11 Pipe & Fitting 20mm o/d 51 CPVC SDR 11 Pipe & fitting 25mm o/d 52 CPVC SDR 11 Pipe & fitting 32mm o/d 53 Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.50mm o/d pipe of 10kgf./sqcm (HOTICULTURE0 54 Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested , equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect. Boring with 300mm id Housing Pipe, upto 150m depth BGL. (EACH BOARING) 55 Supplying, lowering of PVC Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore. 100mm nominal diameter (weight 14.5kg per metre)5.40mm thickness. 56 150mm nominal diameter (weight 21.6 kg per metre) 5.4 mm thickness 57 Providing and fixing Jet Pump 7 HP 58 Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 25 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 59 Cement concrete with 4 cm gauge approved stone ballast approved coaarse sand and cement in the proportion of 6:3:1 incluning supply of all materials labour and T&P etc. required for proper completion of the work 60 Providing and fixing overhead signage board 61 Construction of Septic tank 62 Construction of Soak pit 63 Providing and fixing Modular Table with glass / with MDF board table top and metal understructure (of approved quality) and of required shape and size :Rectangular shape 1500x600 mm 64 Providing and fixing Modular chair in metal understructure of approved quality as per direction of Engineer in Charge. 65 Rain water harrvesting 66 Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big polybag of size 25 cm as per direction of the officer -incharge. 67 Supply and stacking of Ficus religiosa (Peepal) plant of height 150-165 cm. in big polybag of size 30 cm as per direction of the officer -incharge. 68 Providing and stacking of Melia azedarach of height 120-135 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. 69 Providing and stacking of Michelia champa (Golden Champa) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. 70 Providing and stacking of Palm of height 120-135 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. 71 Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately). With grass Turf. 72 Providing and stacking of Ficus panda of height 30-45 cm. with 3-4 branches and healthy foliage in p.bag of size 20 cm as per direction of the officer-in-charge. 73 Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 30-45 cm.,bushy in big size HDPE bag as per direction of the officer-in-charge. 74 Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C 75 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 76 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 77 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 78 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed 20mmconduit as required. 79 25 mm 80 32 mm 81 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 Amodular switch, connections etc. as required. 82 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 83 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 84 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. Module (100mmX75mm) 85 12 Module (200mmX150mm) 86 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 510 MM Sweep 87 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. 88 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 62 A TP&N 89 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole 90 Triple pole and neutral 91 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A 92 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipeof 2.7 metre long etc. with charcoal/ coke and salt as required. 93 Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. 94 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. 95 Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. 96 Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, inter connections as required. 97 Supplying and fixing following modular type switch/ socket on the existing switch box/ cover including connections etc. asrequired.15/16 A switch 98 6 pin 15/16 A socket outlet 99 GST Paid Seperatly
