Tender For Refurbishing Of Ct Simulator Room At Basement Hbb; 1 FLOORING BREAKING:Dismantling carefully the existing damaged cracked serviceable tiles / slabs / clay tiles / marble slab / granite slab / Kota stone/ tandur stone / shahabad stone and all types of flooring in flooring etc. including removing the 20mm thick bedding of cement mortar stone grit or brick bat coba etc. at all floors & levels including disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) 2 CONCRETE BREAKING:Breaking of existingR.C.C including cutting rainforcement / concrete by chiselling at all level including scaffolding and staging and the work shall be carried out so as to cause minimum inconvenience to hospital activity including cost of all material , labour, tools etc. Disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. 3 Providing & applying plaster at an average thickness of 12 to 15 mm in exact line & level in the proportion of 1 : 4 cement and sand mortar by manual mixing, with addition of waterproofing chemical on the walls to act as backing for the tiles to be fixed 4 Providing and laying P.C.C. M15 (1:2:4) concrete in foundation as leveling course 100-150 mm thick including necessary form work, batching, mixing, placing, consolidating etc. complete including wet curing for specified time period. 5 VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on required thickness of cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete as per direction of Engineer incharge.Size of tile 600 X 600, Basic rate Rs 800-900 6 Providing and laying Vitrified Tiles having height 100 mm for Skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing complete. (Basic Rate 800-900/ sqm) 7 GRANITE: Providing and laying 18-20mm thick granite slab in required size and approved colour as per approved sample 1st quality for lift architraves / dado / flooring / sills / platform / sink / with all exposed edges machine cut double machine polished (mirror polish) laid over a bedding of cement mortar 1:3, 35mm thick intrue plain curing finishing the joints making holes for wash basin / sinks coupling in slab if required etc. complete including making grooves in walls for fixing and making good the surface (excluding cuddapah platform) colours – Black/Red/Grey. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) 8 Providing making and supplying computer table made out fo 19mm commercial ply for table top, mounted on the vertical side fo 19mm commercial ply and cabinet made out of 19mm commercial ply for sides, shelves and shutters asshown in drawing drawer and wooden approvedkey board drawer with heavy sliding channels, withhandle for shutter,cable manager drawers all edges shall be lipped with 6mm thick T.W. lipping patti. All exposed faces should be 1.0mm thick laminate of approved colour and non laminated area should be french poll-shed including cost of other materials labour etc. as per drawing and as specified and directed by Engineer-In-Charge.Computer table with all inner surface with 0.8 mm thick approved laminate 9 Providing and fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides and shelves and 6mm commercial ply approved make for back side.Door shutter made up of 19mm thick commercial ply and outer surfaces and top of shelves for open type cabine should be laminated with 1.0mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, knobs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges lipping with 6mm laminate finishThick T.W.lipping patti.locking arrangement with Godrej multipurpose lock etc. All inside areas shall be .80mm thick approved colour laminate etc.all complete as specified and directed by Engineer-In-Charge. 10 Open type 11 With shutter 12 Providing and fixing gypsum board of 12mm Thick to theframe work in true Line and level) joints filled with plaster of Paris including cost of all other material (hardware) Labour & removing existing false ceiling etc all complete as specified and directed. (India Gypsum /saint goben)Making new Gypsum board false ceiling with frame work 13 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. MainT runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanisedbutterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, including removing existing false ceiling all complete for all heights as per specifications, drawings and as directed byEngineer-in-charge. 14 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 15 Removal of old formica along with the adhesive making the surface smooth and providing and fixing new approved of required specification and colour etc. complete as specifiedand directed including fevicol, nails etc. complete.1.00 mm thick 16 Providing and fixing laminate finish panelling with aluminum framing 50 x 50 mm fixed to the wall at 600 mm c/c with 12mm plywood and 1 mm thick laminate of approved shade on single side. Rate to include that for all necessary hardware, adhesive, etc. 17 Preparing and fixing openable covers of 19 inch plywood with ability to sustain a load of 200kgs to be placed on the trenches upto300 mm wide with all nessasary supports , all works complete as per direction of Engineer Incharge. 18 Providing and fixing Skylight (decorative light) with design of natural view having best resolution made fromprinted acrylic, by fixing ceiling interlocked aluminum profile. 19 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 20 Providing & applying one / two coatsof primer two coats of paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Nerolac / Dulux to the required colour scheme and as per manufacturers instructions / specificationsto the walls, beams, columns, ceilings, partitions, doors etc. including removing existing paints , nails , screws , battens etc. and thoroughly scrapping the surface with sand papers filling up crevices and levelling with putty of Asian make necessary to obtain smooth surface ie. complete surface preparation etc. complete as directed to the entire satisfaction of Engineer In-charge.With one coat of primer and two coats of paint Using Luster paint 21 ELECTRICALSWORKSPOINT WIRING :- Point wiring for light/fan/bell with ISI mark 3 x 1.5 sq.mm (P+N+E). FRLS PVC insulated copper conductor of Polycab / RRK /Finolex in surface/ recessed heavy class pvc casing capping/conduit of Presto-plast/sunwood /Precision make with Modular switch of Legrand-Myrius/MK-Blenze & Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete. 22 Primary point length 4 mtrs to 7 mtrs 23 Primary point length7 mtrs to 10 mtrs 24 Secondary point Extending from Primary point upto 4 m 25 Dimmable Led light pointwith 100W - Regulator7 to 10 meter length 26 DISMANTLING:- Carrying out assigned jobsof dismantling the existing light, fan, bell, independent plug point wiring of all types with accessories and cable /switchgearin anapproved mannerwith tools and tackles as per instruction of Engineer Incharge 27 Supply & installation of Power pointLegrand-Myrius/MK-Blenze (inclusive of 2No.of 5/15 Amp switch socket, back box, face plate & wiring,accesories etc) 28 Supply & installation of Power pointLegrand-Myrius/MK-Blenze (inclusive of 1 No.of 5/15 Amp switch socket, back box, face plate & wiring, Circuit naming accesories etc) 29 Telephone outlet :- Supplying and instllation of telephone outlet point inclusive of Telephone instrument panasonic KX TS 500 B/400B, Telephone socket with back box ,plate, laying two pair0.5 mm gauge unarmoured telephone wire D.O.T approved, make Dlink/Finolex/Digilink/Polycab through conduit/casing caping up to nearesr Telephone TT box. 30 SUB MAINSMains :- Providing concealed,surface finishedHeavy duty conduit ISI mark or Casing capping as per site requirement withSupplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling complete. 31 2 x 1.5 sq mm -+ 1.5sqmm Earth wire 32 2 x 2.5 sq mm -+ 1.5sqmm Earth wire 33 LIGHT FixturesSupply and installation of LED fixtures - Surface /Suspended / Recessed Mounted luminaires Philips / Orient / Bajaj Make 34 LED Light fixture Duraslim 15 watt, Round6500K, 35 LED Light Fixture Full Glow 2FT X2FT 6500K 36 Dimmable LED Light Fixture, 10 watt ,Warm-white 37 Distribution Boards Supply, installation, testing & commissioning DBs SPN DB with Metal door, 12 way,IP 43, inclusive of required rating MCB,RCBO 38 Fabricate Supply and Fixing of Stainless steel Trunking /covering16 Gaugeofsimilar to Ω shapeoras per sampleTo cover casing capping of 50 mm 39 Earthing Conductor :- Supplying,installation of FRLS copper conductor wire of earthing system on wall /slab/column/beam along with clips etc including end connections with crimping type copper lugs complete in all respected and as directed by Eng-in-charge1 x 95 sq.mm 40 Earthing StationProvidimg chemical earthing with drilling in soil by means of proper drilling equipments in soil by means of proper drilling equipment as per requirment of site condition and providing earth electrode Cu bounded Steel Rod 17.2 mm dia X 3000 mm length (100 Microns) as per IEC 60364/62561 ECO safe carbon based backfill compound 50 pounds with Gun Metal Clamp and providing ECO friendly rust proof heavy duty wheather proof Polyethylene Earth Pit Chamber with dimensions 254 mm dia (top), 330 mm dia (bottom) and 260 mm (height) with submission of test report as per directions of EIC and making the site clear by removing debris. 41 Addressable FA SystemSupply ,installation, testing & commissioning of intelligent addressable smoke detector with base complete in all respect with connection in existing FA loop with activation and testing at FA panel(Make-Honeywell) 42 Removing and reinstallation, testing & commissioning of intelligent addressable smoke detector complete in all respect with connection and activationin existing FA loop (Make-Honeywell) 43 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED,metallic cover complete with all connections in existing FA loop with activation and testing at FA paneletc as required (Make-Honeywell) 44 Supplying & laying with saddle of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR)insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.Colour-Red
