|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 4 | Foundations, footings, bases for columns. |
| 5 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 6 | 100 mm |
| 7 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 8 | For fixed portion |
| 9 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 10 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 11 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 12 | Placing and fixing in position boundary wall grills over the wall at a height up to 5.00 metre above the ground level including lifting and necessary repairs to the grills such as straightineing and necessary welding as and where required all complete as per the direction of Engineer in charge. |
| 13 | Providing and fixing approved quality 1.50 mm thick PVC sheet in flooring and skirting of Tusker, Royal House, Challanger, wonder floor or equivalent make in approved colour and pattern on a smooth and damp proof base using rubber based good quality adhesive including rolling wih light wooden roller weighing about 5 kgs after making necesssary repairs to existing floor all complete as per the direction of Engineer-in-Charge. |
| 14 | Applying priming coat : |
| 15 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 17 | Two or more coats on new work. |
| 18 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 19 | Two or more coats on old work |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 21 | One or more coats on old work. |
| 22 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 23 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 24 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 25 | 10 litre capacity - White |
| 26 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 27 | White solid plastic seat with lid |
| 28 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 29 | 15 mm nominal bore with 45 cm length. |
