|
| 1 | Reconstruction work of Head Regulator of 110 of Satwasa Dy and Ch. 224 of Jeejalwada minor |
| 2 | Excavation in all kind of soft/loose/ hard/dense soils, moorum & moorum mixed with boulders and mud including dressing, placing the excavated soil neatly in specified dump area or disposing off the same as directed, including cost of site clearance, all materials, machinery, labour and dressing etc. Complete. |
| 3 | Providing and laying M-10 grade Plain Cement Concrete design mix using 40 mm graded aggregate, clean, hard for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing ,packing joints of shuttering etc. Complete. |
| 4 | Providing, Laying and Jointing non-pressure(NP3) RCC socket & spigot pipes with rubber gasket joint/joint caulked with cement mortar 1:2 including testing of joints. (Conforming to IS ; 458-1988, IS 783:1985) etc. complete.600mm Dia |
| 5 | Providing and laying M-15 grade Plain Cement Concrete Design Mix using graded aggregate clean, hard for foundation filling and sub structure including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing ,packing joints of shuttering etc. complete. Using graded aggregates of 20maximum size. |
| 6 | Filling foundations around masonry works with soil obtained from spoil banks including watering and ramming etc. complete. |
| 7 | Providing and laying M-20 grade Reinforced Cement Concrete Design Mix using graded aggregate clean, hard super structure including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing ,packing joints of shuttering etc. complete. Using graded aggregates of maximum size.20mm |
| 8 | Providing, fabricating and placing in position steel reinforcement bars for Reinforced cement concrete / Plain Cement Concrete structures including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping / welding joints wherever required, tying with 1.25 mm diameter soft annealed steel wire etc. Complete. |
| 9 | Providing and constructing PVC pipe weep holes for concrete / masonry walls including cost of all materials, machinery, labour, providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion by volume with 100 mm thick sand backing at the junction of wall and soil back fill, etc., complete. |
| 10 | Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift sliding type Shutter gates interchangeable consisting of ,sealing frame(embeded),skin plate of shutters, stiffeners, horizontal and vertical girders, guide, stainless steel flat, lifting hooks, Clits etc., with all accessories including frame & gate complete set as per relevant IS code for Barrage/Stop dam/waste weir /spillway including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint as per relevant IS code, seal fixing etc., complete as per specifications and approved drawings, including packing & forwarding charges for structural steel components and other materials(0.60Mx060M) |
