Tender For Maintenance Work Of Community Center At Sector-3, Scheme No.-10, Madhavpuram, Meerut - Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 1:4:8 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 2 12mm thick plaster with 1 cement : 6 Course sand over brick work, minimum thickness not to be less than 3/8 (10mm) thick including supply of all materials, labour and Tools and Plants etc required for completion of the work. 3 Add Extra For Plaster on rough face 4 Dismentling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meter (200 feet). 5 Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 6 20 mm thick plaster with 1:3 cement and coarse sand including water proofing compound with neat cement finished including supply of all labours and T & P etc. required for the proper completion of the work. 7 25 mm thick 1:2:4 plain Cement concretefloor with cement approved coarse sand and 2cm. Graded approved stone ballast laid in panels finished with 3mm (1/8) floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm.(3) local sand and brick ballast 4 cm. gause in proportion of 1:4:8 and removing any giving then a uniform finish,including supply of all materials, labour, T&P etc. required for proper completion of the work. But with base concrete. 8 Same as above item no.-7 but without base concrete. 9 2 cm. (3/4) thick cement plaster in dedo or skirting in 1:2 consisting of one part of cement and 2 parts of approved coarse sand laid in pannels, finished with 3 mm (1/8) floating coat of neat cement or cement and marble dust in ratio of 5 1 including supply of all materials labour and T & P etc. required proper completion of the work. 10 Providing and fixing glass strip of 22x5 mm in joints of floors for skirting at the time of laying floors flush with floor level including labour and T&P etc. complete supply of glass strips of following sizes. 11 Finishing wall with water proofing cement paint approved quality and shade over on new work with two coat of white cement including etc. and also including supply of all materials, labour and T&P etc. required for the proper completion of the work. Qty. same as per external plaster in item no.-1 12 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters andalso including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour,Tools & plants etc.required for proper completion of the work. 13 Providing wall puttyon new surface with approvel quality material of Berger/ J.K./ Birla or similar make 2 coats. 14 Painting roofs or other iron work in large areas with one coatpriming paint and two coat of approved superior quality paint including supply of all materials , labour & tools and plantsetc. required for propercompletion of work . Paint to be used ISI marked. 15 Painting or varnishing work in small areas or new woodwork with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. 16 First Class/Class 150 brick work in1:6cement and coarsesand (FM 1.50 to 2.20) mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for propercompletion of the work. 17 Class 150 brick work in 1:6 cement and coarse sand of 1.5-2.00 fineness modulus mortar in super structure for one brick wall including supply of all materials, labour and tools and plants etc, required for proper completion of the work. 18 First class/Class 150 brick work in1:4cement and coarsesand(FM 1.50 to 2.20) mortar in super-structure including necessary cutting and mouldingof brick work as required andalsoincludinghoney combed brick work in wall thickness 12 cms & below including supply ofall materials, labourand tools and plants etc. requiredforproper completion of the work. 19 Supply and fixing of30 mm thick flushdoors commercialqualityconformingtoI.S.2202 Part I (1983) includingfixingof wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handle, springs and other Fitting with necessary screws complete. 20 Providing and Fixing Stainless steelsliding bolts14 mm dia with nuts and 300 mm long. 21 Providing and Fixing Stainless steelsliding bolts14 mm dia with nuts and 250 mm long. 22 Providing and Fixing Stainless steel tower bolt with 10 mm dia and screw 300 mm long. 23 Providing and Fixing Stainless steel tower bolt with 10 mm dia and screw 250 mm long. 24 Providing and Fixing Stainless steel tower bolt with 10 mm dia and screw 200 mm long. 25 Providing and fixing stainless steel handle with screws etc. complete 150 mm. 26 Providing and fixing Door Silencer with screw etc. complete. 27 Providing and fixing Door Stopper with screw etc. complete. 28 Mild steel or Iron work in heavy sizes such as truses, built up gates, door frames, record racks, roof work, gates etc wrought to required form including drilling holes, rivetting or welding where necessary and also including supply of steel bolts nuts etc & their fixing required for proper completion of the work. Providing & fixing of angle door chaukhats 35 x 35 x 5mm 29 Same as in above item but for Fabrication of grill / stairscase railing/Gate. 30 Same as in above item but for Fabrication of Z-section steel windows. Openable 31 Providing & fixing PVC pipe confirming to IS make working pressure 6 kg./cm2 including testing, labour, T&P and all complete fittings. 32 Making drip coarse in 1:3 cement and corase sand in sunshade as per direction of Engineer-In-Charge including supply of all materials, labour, T&P etc. required for proper completion of the work. 33 Providing and fixing glazing in Z-section, windows, doors, ventilator shutters and partitions etc. with glass putty/beading etc. complete. (i) With float glass panes of 4.0 mm thickness. 34 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (By Mix in Place Method) 35 Supply of 80mm thick Precast cement concerete I-Shape Interlocking paver blocks ISI markconfirming to IS: 15658-2006 with top layer of minimum 5 mm thicknesshaving plan dimension 200x(160+120mm) of O.P. Cement , smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40Mpaand weight 4.5kg perincluding cost of material, with a blanket layer of 4.00cm. thick fine sand. includinglabour, T & Petc required for proper completion of the work as directed by Engineer-in-charge. 36 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3approved cement andcoarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer-in-charge. 37 Supply and fixing 6 mm. (¼) China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants. 38 Water Supply & Sanitary :-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 20mm dia nominal outer dia pipes All floor level. 39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall. 25mm dia nominal outer dia pipes All floor level. 40 Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931. 41 Providing & fixing 15 mm nominal bore C.P. brassstop cock (concealed)of standard designandof approvedmakeconforming to IS : 8931. 42 Supply & fixing PTMT Towel Rail 600 mm long width 78 mm weight not less than 190 gm complete with brackets fixed to wooden cleates with C.P. Brass screw etc. inclduing supply of all materials, labour and T&P etc. required for the proper completion of the work. 43 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 44 Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standardpattern, including painting of fitting and brackets, cutting & making good the walls wherever required. Flat back Wash Basin size 550x400 mm with single 15mm C. P. brass pillar tap. 45 Supply & Fixing of upvc SWR Pipe Type-B confirming to IS-13592 incluiding jointing the pipes with rubber ring lubricant and UPVC SWR Cuplar confirming to IS 14735 also inluiding excavation of treches cutting of walls and holes and repairing of walls, floors and refilling the trenches as before cut including cost of other fittings such as door band, T and YT including supply of all materials labour and t&p required for prper complition of the work. 110mm dia SWR Pipe. 46 Same as Above Item but for 90mm dia SWR Pipe. 47 Providing and Laying cement concrete 1:5:10 all-round S.W. Pipes including bed concrete as per standard design : 100 mm dia. 48 Supply & Fixing of UPVC SWR Nahani Trap size100/90mm confirming to IS -14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali. 49 Providing and fixing square mouthS.W. Gully trapgrade `A complete with C.I. gratingbrickmasonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 150 x 110 mm. size P type. 50 Construction of sewer connecting chamber having internal size 60 x 60 x 60 cm constructed in class 150 brick work in 1:6 cement and coarse sand mortar, 10 cm thick PCC 1:4:8 in base and internal side plasterred with 1:3 cement and coarse sand mortar including a floating coat of neat cement and 2.5 cm thick PCC 1:2:4 flooring of chamber and 10 cm thick top cover in RCC 1:1.5:3 including reinforcement steel 51 Providing and placing on terrace (At all floor levels) polyethylene water storage tank ISI:12701 Marked (Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-In-Charge. 52 Providing & fixing white viterious flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. Brass flush pipe, spreaders with unions and clamps (all in C.P. Brass) with waste fitting as per IS:2556, C.I. Trap with outlet grating and other couplings in C.P. Brass, including painting of fittings and cutting and making good the walls and floors wherever required : (C) Range of three Half Stall Urinal with 10 litre PVC automatic flushing cistern. 53 Providing & fixing white viterous china urinal partition size 90x320x720mm urinal partition includingbrackets, cutting & making good the walls wherever required. 54 Electrification :-Wiring point for light with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the medium class PVC conduit, with modular type switch and ceiling rose/angle/ batten holder on 3 mm, thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash. 55 Wiring point for fan/fress air fan with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit, modular switch and ceiling rose on 3 mm, thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash. 56 Wiring point for plug with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the medium class PVC conduit, modular switch and socket etc. complete in all respects, as directed including matching colour wash. 57 Supply & Fixing of LED Tube Light batten suitable for up to 1x22 watt LED Tube Light complete including tube etc. on surface complete in all respect. 58 Supply and fixing of LED Tube Light with batten suitable for up to 2 x 22 watt LED tube light fitting including tube on Surface complete in all respect. 59 Supply & wiring of submain with two number 2.5 sq.mm. FR PVC Insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one number 1.5 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn in conduit. 60 Supply & wiring of submain with two number 4 sq.mm. FR PVC Insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq.mm. multistrand copper conductor cable as earth continuity wire drawn in conduit complete in all respect. 61 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 62 Supply and fixing of power plug with 20A/250 V Modular type switch and 5 Pin 20A/250V Modular type socket anduniversal socket in suitable M.S. box including supply of all material, labour T&P etc. required for proper completion of work. 63 Supply and fixing surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge. 64 Supply and fixing of 6 Amp to 32 Amp. SPMCB (10 KA) 65 Supply and Erection of AC 1200 mm sweep 230/250 volts, 50 Hz. ceiling fanwithout regulator standerd downrod , blade includingconnection etc.complete as per direction of E/I make:- Bajaj Crompton or Equivalent. 66 Supply and Erection of 300 mm sweep size metal Exhaust fan on existing hole complete in all respect. 67 Supply and fixing ofElectronic FanRegulator (Modular) 120-280 VISI marked on the existing switch board including making connections,requiredmaterial,labourT&Petc.for proper completion of work to the satisfaction of Engineer Inchargeof work. 68 Supply & fixing of 3 mm thick backlitesheet cover round/hexagonaltype for fan box complete with all material labour T&P as per direction of E/I. 69 Supply & fixing of round junction box coverof 3 mm thick bakelite sheet on existing junction box with the help of brass M/C screw and cup washer complete as per direction of E/I. 70 Supply and fixing of 63 Amp. S.P. Isolator
