Tender For Renovation Work For Arulmigu Ramanatheeshwarar Thirukovil Esalam Vikravandi Tk Villupuram Dt, Villupuram-Tamil Nadu

Tender For Renovation Work For Arulmigu Ramanatheeshwarar Thirukovil Esalam Vikravandi Tk Villupuram Dt- Providing Scaffolding for vimanam raja gopuram with non flammebable materials wherever necessary for main form work and by providing coconut keeth as covering the areas & plat form for inspection etc all complete. 2 Vimanam Height upto 25-0 3 Vimanam Height upto 15-0 4 Dismantling Brick / Stone Masonry in lime mortar walls under 3m high 5 Dismantling RCC by manual / by using deploying machineries 6 Dismantling Plain Cement Concrete 7 Labour Charges for Old Stone Removing 8 Filling with foundation and basement with M.Sand in 15cm. Thick layerswell rammed & consolidated, including watering, complying with std.specification etc complete. 9 Labour Charges for Old Stone Fixing 10 Labour Charges for old stone Single Line dressing 11 Labour Charges for old stone Three Line dressing 12 Thorough scrapping of old plastered surface 13 Painting with multicolour (Panchavarnam)good water based exterior emulson paints complete for the Vinamans/Gopurams, including costand conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc,complete-which including all extra for foldings-100sft, superficial area. 14 Painting two coat with approved water based Exterior Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curingin all floors including brushes etc., complete as per specification 15 Dismantling Lime Concrete 16 Pressed Tiles & Weathering Course 17 Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and well watering consolidatedwith wooden beaters to slop including cost and conveyance of materials to site and labour charges etc complete for 10Cum 18 Finising the top of the roof with one course of pressed tiles of size 20X20X2cm over a bed of Lime mortor 1:2 12mm thick mixed with water proof compound at 2% b weight ofcementincluding cost and conveyance of all materials to site and all labour charges etc 19 Restoration by providing herbal water wash and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges fortools & plants and machinaries to the workship spot and cleaning the site after completion of work etc 20 Pointing with Lime mortar 1:1.5 including all tools and plants and labour etc., all complete 21 Painting two coats over old wood works using ready mixed enamel paint including costand conveyance of paint and all labour charges etc complete 22 Painting two coats for old iron works over the one coat of primer such as ironbarsflatsandothersimilarworksetc, completecomplying with std specification 23 Plastering with Combination Mortor 1:1:5 mixto 12 mm thick including cost and conveyance of all materials to site and all labour charges etc completefor10 Sqm 24 Ceiling Plastering with Cement Mortor 1:3 mixto 10 mm thick including cost and conveyance of all materials to site and all labour charges etc completefor10 Sqm 25 Scrapping and removing old paint from structural steel by manual labour 26 Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable ULP trunking box on wall and ceiling withaccessories with Module GI switch box on wall with6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm.PVC insulated SC unsheathed copper wireforLight point / fan point (for electronic regulator) ( 5 points / Coil) Higher End 27 Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm.PVC insulated SC unsheathed copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End . 28 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End 29 Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting. 30 supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . 31 Supply and fixing of fancy glass shade and 9W LED for BH point. 32 Supply and fixing of WT bulk Head fitting with Guard with 9W LED bulb 33 Supply and fixing of 3 nos.6A two module 5 pin socket ,3 nos. 6A one module switch on suitable modulesurface mounting Box ( GI ) with module cover plate (plastic) on wall with connections. Higher End 34 Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable modulesurface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End 35 Supply and fixing of MS clamps of size 1¼ x 1¼ on pillar with suitable Bolt / nuts and painting of suitable colour. 36 Supply and run of MS angle with necessary clamping arrangements on the pillars with neccesaary accessories as directed by the departmental officer. 37 Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour. 38 Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in the existing PVC duting with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire . 39 Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour 40 Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in the existing PVC duting with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire . 41 Supply and clamping of 4 x 2.5 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps. 42 Supply and laying of 4 x 2.5 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good 43 Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. 44 Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. 45 Supply and fixing of brass cable gland for 4 x 25/ 10sqmm PVC armoured LTUG cable with earth connection. 46 Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. 47 Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End 48 Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution boardwith double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB asoutgoing on suitable angle iron frame on wall with earth connection only. Higher End 49 Supply and fixing of 40A phase selector switch on sheet steel enclosure box with indicator lamps and electrical connections complete. 50 Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. 51 Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class B) suitably bent at both ends with necessary angle iron up right and end supports for mains. 52 Supply and fixing of powder coated box on wall fabricated with MS sheet of 16 gauge of size 900mm x 300mm x 450mm with 3 nos. of 63A (500V) porcelain fuse units, 1 no. of 63 TPN sheet steel double break switch with HRC Fuse units provision for fixing TNEB meter with electrical connections complete. 53 Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. 54 Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete. 55 Earthing as per the PWD standard with an earth electrode of 2mt class B GI pipe of dia not less than 32mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. 56 Supply and run of 1 of No.8 SWG Copper wire for earth connection. 57 Supply and fixing of brass cable gland for 2x4 ( 4 x 2.5)sqmm PVC armoured LTUG cable with earth connection. 58 sub total 59 GST 18%

Refer document

INR 41000.0 /-

INR 61.40 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB