Due to change of residence in new house number-05 situated in Gautampalli colony, renovation of three bathrooms of main building, making kitchen cabinet in kitchen, making false ceiling, installing UPVC windows in yoga room, installing toughened glass in drawing room, polishing Kota stone, installing mica on doors, installing mosquito net, polishing windows/doors, plaster repair along with painting and other very necessary various repair works in the external part of the house. - Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DSR. 15.23.1, 2 Providing and laying Rectified Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DSR-11.40) 3 Providing and fixing Ist quality Ceramic Glazed Wall tiles Conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size-300x450 mm, (DSR-8.31), 4 Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50 mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 110 mm dia meter. 5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain&brassthreadedfittingsandfixingthepipewithclampsat1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes. DSR No. 18.8.2, 6 Providing and fixing 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thickhard board groung fixed to wooden cleats with C.P. brass screws and washers complete.17.31, 7 S/F 15mm dia C.P. health faucet with 8mm dia 1.20 Metre meter long flexible tube & wall hook, Jaquar make Code N0-ALD-573, including supply of all material, labour, T&P etc. complete. 8 Supply and Fixing of Florentine C.P. Brass Single Lever Basin Mixer without Pop-Up Waste System with 450 mm long braided hoses, Jaguar Make Code N0-FLR-5001B, including supply of all material, labour T&P etc. complete. 9 S/F of C.P. Brass Single Towel Rack 600 mm with long hungers Jaguar make Code N0-AKP-35781PS, including supply of all material & labour and T & P etc. requird for proper completion of work. 10 S/F of C.P. brass towel ring Square Jaguar make Code N0-AKP-35721P, including supply of all material & labour and T & P etc. requird for proper completion of work. 11 S/F of Overhead Rain Shower square Size-300x300 mm Jaquar make Code No-OHS-CHR-1633 with O/H Shower Arm300 mm Round Shap with 90° Bend for wall mounted shower with Flange. Code No-479L600 Jaquar make including supply of all material & labour and T & P etc. requird for proper completion of work. 12 Supply and fixing of CPhand Shower Ø95mm round shape single flow (ABS body in chrome Plated with Grey Face Plate) with rubit cleaning sysyem of Jaquar make (Code No- HSH -1737) with Flaxible Tube 8 mm dia & 1.5m long with nuts Code no-SHA-549D8 including supply of all material & Labour and T&P etc complete. 13 S/F of C.P. brass toilet Roll/Papar Holder with Flap Jaguar make Code N0-AKP-35753PS, including supply of all material, labour, T&P etc. complete. 14 S/F of C.P. brass Soap Dish Holder Jaquar Make Code N0-AQN-7731, including supply of all material, labour, T&P etc. complete. 15 Supply and Fixing of Glass Shelf 600 mm long Jaquar make Code N0-AKP-35771P, including supply of all material, labour, T&P etc. Complete. 16 Supply and fixing of Aria Wall Hung Basin With Pedestal, Size 570X470x190 mm ARS-WHT-39801+ARS-WHT-39301, Jaquar makewith C.P. jali, PVC waste pipe, Bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work. 17 Providing and fixing of Single Piece Bowl with Cistern for Coupled WC with UF Soft Close Slim Seat Cover Hinges, Dual Flush Cistern Fittings And Fixing Accessories, Size-370x670x720 mm. P Trap 180 mm Code N0-LYS-WHT-38851s300UFSMN, Jaquar make, including Cutting and making good the walls and floors wherever required. 18 Supply and Fixing of C.P. Angular Stop Cock with Wall Flange Jaguar Make. Code N0-FLR-5053N, including supply of all material & labour and T & P etc. requird for proper completion of work. 19 Supply and Fixing of C.P. Jali 125 mm. 20 Supply and Fixing of PVCNahani Trep, 21 Supply and Fixing of 15mm dia Florentine C.P. brass Two way bib cock with Wall Flange Jaguar Make Code N0-FLR-5041N, including supply of all material, labour, T&P etc. complete. 22 Providing and Fixing of 15mm dia Florentine C.P. brass Bib Cock, (Straight line model) with wall Flange Jaguar Make Code N0-FLR-5047N, including supply of all material, labour, T&P etc. complete. 23 Supply and Fixing of Florentine C.P. Brass Wall Mixter 3-in-1, System with Provision for both hand shower and overhead shower Complete with 115 mm long Bend Pipe, Connecting Legs & Flange (without Hand & Overhead Shower), Jaguar Make Code N0-FLR-5281N, including supply of all material, labour T&P etc. complete. 24 S/F of C.P. trumbler holder Jaguar Make Code N0-AKP-35741P, including supply of all material & labour and T & P etc. requird for proper completion of work. 25 S/F of C.P.CP BRASS SINGLE TOWELRAIL600 MM Jaguar Make Code N0-AKP-35711PS, including supply of all material & labour and T & P etc. requird for proper completion of work. 26 Supply and Fixing of CORNER Glass Shelf Jaquar make Code N0-ACN 1173, including supply of all material, labour, T&P etc. Complete. 27 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen plateform, vanity counter, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement: 4coarseSand) Joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbring, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any Colour and shade Area of slab over 0.50 sqm. DSR No. 8.2.2.2 , 28 Providing and Fixing of Kitchen Cabinet 60cm Depth with Centurey Ply 19mm thick of Superior quality and both side Laminated 1mm thick sunmica Supirior quality Fixing with Glue and Nails etc and Fixing of Stainless Steel Fittings as Handle, Hinges etc. Complete work as Per Direction of Engineer in Charge. 29 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen Sink as per IS : 13983 with C.l. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. DSR No. 17.10.1.1, 30 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore, DSR No. 18.51.1, 31 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality- 1.0 mm thick, DSR No. 9.127.2, 32 Providing and fixing skirting 18 mm thick with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete 18mm thick. DSR No. 8.30.1, 33 Providing CorrugatedG.S. Sheet roofing including Vertical /Curved Surface Fixed with polymer Coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white Lead, including a Coat of approved Steel Primer and Two coats of approved Paint on Overlapping of Sheets Complete (UP to any Pitch in horizontal /Vertical or Curved Surface), excluding the Cost of Purlins, rafters andand trusses and including cutting to size and shape wherever required. (1.00 mm thick with Zinc Coating not less than 275 gm/m²) DSR N0-12.1.1, 34 Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/aqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a derection perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every juction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compoung, jointing tapes, finishing with jointing compound in 3 layers covers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board, DSR No. 12.45.3, Rs. 1207.90 35 Three Tack Three Panels Sliding window with two glazed & One wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R23 series with frame (98mm & above) x(40mm & above)& both glazed and fly screen sadh (30mm & above) X (55mm & above) with zinc aloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m) DSR No. 9.147.A4.2, 36 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement andmakingnecessaryholesetc.forfixingrequireddoorfittings,all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). DSR No. 21.18 37 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. DSR No. 8.6 , 38 Providing and fixingfly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average widht of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. DSR No-9.51.1, 39 12 mm Thick plaster with cement mortar in proportion of 1:4 cement & coarse sand DSR No. 13.4.1, 40 Removing white or colour wash by scrapping andsand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR N0 13.88, 41 Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete.DSR N0-13.80), 42 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @1.43 ltr/10sqm) over existing cement paint surface(DSR N0. 13.112.1), 43 Melamine polishing on wood work (one or more coat). DSR No. 13.114,
