|
| 1 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 2 | Kiln seasoned and chemically treated hollock wood. |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 4 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 5 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 6 | 250x10 mm |
| 7 | 150x10 mm |
| 8 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 9 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: |
| 10 | 125 mm |
| 11 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 12 | Size of Tile 800x800 mm |
| 13 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm |
| 14 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 15 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 16 | Size of Tile 800x800 mm |
| 17 | French spirit polishing : |
| 18 | Two or more coats on new works including a coat of wood filler. |
| 19 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 20 | Old work (one or more coats) |
| 21 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. |
| 22 | For door/ window/ clerestory window. |
| 23 | Dismantling ofexisting polyvinyle sheet /Anti static flooring from flooring and preparing the surface smooth and clean as per the direction of Engineer in Charge.( The dismantled material is unserviceable and unuseable and is required to be disposed off) |
| 24 | a) 1.mm thick sheet |
| 25 | Refixing of dismembered aluminium partition, glass panes and particle board in the required new position,(excluding doors & windows)making into required shape & size as per site conditionsincluding cost of rubber gasket,cleats, labour steel screws,etc.wherever required all complete, and as per the direction of Engineer-in Charge. |
| 26 | Providing and fixing horizontal Zebra type blinds ofVista make Sheer- Dimout Non Blackout Elemental Series or of equivalent make complete all as per following specifications :The fabric shall be 100 % polyster, finished width300 cm, weight 112 GSM, Fabric repeat size solid 8.0 Cm / Mesh 5.0 Cm.. The roller tube / round bottom rail / triangle bottom rail / valance rail / ceiling rail shall be of powder coated Aluminium alloy extruded tube.The size of roller tube shall be of40 mm outer dia and weight 220 gms/ meter,round bottom rail of size 14 mm outer dia and weight 220gm/meter, triangle bottom rail of size 15x24x24 mm weight 230 gm /metre, valance rail 84.5 mm weight 320 gm / meter. Installation bracket shall be made up of mild steel with white powder coatinghaving thickness of 1.8 mm for mounting control unit and idler. Ceiling bracket shall be made up of mild steel with white powder coatinghaving thickness of 1.0 mm for fixing blind to the wall or ceiling. |
| 27 | Operating chain shall be made up of 4.5 mm plastic beads moulded on 2.0 mm thick polyster cord. The pitch of beads shall be 6 mm. The control unit shall be made up of high strength reinforced plastic. The clutch shalll be of warp spring design. High carbon steel springs shall be provided to transmit motion from driven mechanism. Clutch shall be operated directionally by use of beaded endless chain to raise or lower the blind smoothly to decide height.. The rate is inclusive all accessories. |
| 28 | Providing and fixing Black sun control film on windows of Mcore/ Garware or equivalent maketo prevent sun glare including all labour and material complete as per the direction of Engineer in Charge. |
