Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-05-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-05-2025 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) of any description & in any position not specifically providedcomplete including dismantling of floor tiles etc complete all as specified. |
| 2 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified. |
| 3 | Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortarin floors, aprons etc. complete all as specified and directed. |
| 4 | M&L for cement concrete(1:2:4) type B-0 (using 12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring/tiles etc completeall as specified. |
| 5 | M&L for PCC 1:2:4 type B1 (using 20mm graded stoneaggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified. |
| 6 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4)for bedding of tilescomplete all as specified. |
| 7 | M&L 10 mm thick rendering in cement mortar (1:3) on vertical surfaces for backing of tiles etc complete all as specified. |
| 8 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:4)for bedding of tilescomplete all as specified. |
| 9 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 10 | M&L forNon - skid (joint free) coloured Ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 11 | M&L for Glazed ceramic colouredtiles in vertical surface 600X300X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified. |
| 12 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 13 | Providing edge moulding to 18-20 mm thick stone(any description) of counters vanities etc, including machine polishing to edge to give high gloss finish etc. Complete to Granite stone any description. |
| 14 | M&L for guniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement plumb and making surface true to geometry in line and including necessary form work to be carried at upto doublestorey building Note.- Where ever reinforcement required will be measured and paid seperatly etc complete all as specified. |
| 15 | M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified. |
| 16 | Demolition of Mud in roofs, any thickness including plastering and leeping,(whether full thickness removed etc complete all as specified. |
| 17 | M&L for 40 mm thick PCC (1:2:4)type B-0 (Using 12.50 mm graded stone aggregate) as in roof padding complete all as specified. |
| 18 | M&L for 15 mm thick plaster in cement mortar (1:4) mixed with water proofing compound on roof slabs finished even and smooth (without using extra cement) after cleaning of roof surfaces with wire brushes complete all as specified.Notes : WPC shall be measured and paid seperately. |
| 19 | M&L for water proofing treatment with minimum 3mm thick APP (Atactic Polypropylene) modified polymeric prefabricated five layer membrane over roof consisting of cleaning of concrete or plaster surface of roof & parapet walls and applying evenly a bitumen primer confirming to IS 3488 @ 0.40 Kg per sqmlaid using buten torch and sealing all joints of APP modified polymeric water proofing membrane minimum weight 3.6 kg/sqm reinforced with non woven polyester fabric (weight not less than 160 grams per sqm) unrolled and bonded to substrata with logitudinal and end laps 100 mm and 150 mm respectively as per manufacturer\"s instructions complete all as specified. |
| 20 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified. |
| 21 | M&L for providing plain cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in coping or roof kerbs on roof chamfered on edge including trowelling slightly complete all as specified. |
| 22 | M&L for Cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, set with grey cement and pigments over 15mm thick cement screed bed in cement mortar 1:4 complete all as specified and directed. |
| 23 | Removingbldgs demolished materials / debries exc. 1.50 km but n exc. 5 km and depositing where directed. |
| 24 | Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified. |
| 25 | M&L for brick work with sub class \"B\" old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified. |
| 26 | M&L for half brick work with sub class \"B\" old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified. |
| 27 | M&L for rendering 15 mm thick in cement mortar (1:6) onbrick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified. |
| 28 | M&L for 15 mm thick plastering in two layers (10+5) mm in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), top layer shall be with WPC as per manufacturer\"s instruction and complete all as specified.Note: WPC shall be measured and paid separately. |
| 29 | M&L rendering 10mm thick in cement mortar (1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified. |
| 30 | Supply only intergral water proofing compound ISI Marked complete all as specified. |
| 31 | M&L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform all as specified. |
| 32 | M&L for providing 3mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform all as specified. |
| 33 | M&L for preparation ofnewly plastered surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified. |
| 34 | M&L for preparation ofnewly plastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified |
| 35 | M&L for preparation ofnewly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified |
| 36 | M&L for preparation of plastered or unplastered old decorated surfaces by complete removal of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible , filling of holes and cracks with with suitable material like cement or plaster of paris etcand thereafter applying two coat of oil bound distemper over a coat of primer on walls complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer.(c) Wall care putty shall be measured and paid seperately. |
| 37 | All as per item No.36 here-in-before but on surfaces of ceiling. |
| 38 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality on wall/ceiling surface including applying 1-2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and as directed.Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. |
| 39 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified. |
| 40 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified. |
| 41 | Taking down shutter of any description exc 1 Sqmand n exc 2 Sqm and removing from site complete all as specified and directed. |
| 42 | S&F forPressed steel frames 125X60mm (made out of 1.25 mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified. |
| 43 | S&F forPressed steel frames 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified. |
| 44 | M&L cement concrete (1:3:6) typeC1,(using 20 mm graded stone aggregate) as in filling of door frames of pressed steel and in bed blocks etc complete all as specified. |
| 45 | S&F factory made 35 mm thickflush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified. |
| 46 | S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified. |
| 47 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 48 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 49 | S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified. |
| 50 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified. |
| 51 | S&F 150 mm size extruded aluminium alloy handles fabricatedtype anodised and fixed. |
| 52 | S&F 250 mm long aluminium alloyanodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified. |
| 53 | S&Fin repair 300mm, ordinary rat tailmade of brass rod pattern springsincluding roller androller plate complete |
| 54 | S&F in repair Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm, complete all as specifed and direcetd. |
| 55 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified. |
| 56 | S&F powder coated anodized aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 57 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 58 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 59 | S&Ffor 4.8/5.0 mm thick sheet glass ordinary quality and glazingeach pane n exc 0.50 Sqm fixed with neoprenerubber gasket in aluminium frame work complete all as specified. |
| 60 | S&Ffor 4.80/5.0 mm thick frosted glass ordinary quality and glazingeach pane n exc 0.50 Sqm fixed with neoprenerubber gasket in aluminium frame work complete all as specified. |
| 61 | S&FStainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified. |
| 62 | Dismantling of cast ironpipe up to 100 mm dia, jointed in cement mortar and taking out in trenches/Wall if required etc complete all as specified. |
| 63 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. |
| 64 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. |
| 65 | S&Fin repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls. |
| 66 | S&Fin repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls. |
| 67 | S&F 110mm PVC (SWR) bends with access door any radius |
| 68 | S&F 110mm PVC (SWR) bends any radius |
| 69 | S&F 110mm PVC (SWR) vent cowl |
| 70 | S&F 75mm PVC (SWR) bends any radius |
| 71 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints including bend, tee, laid in trenches or in floors 50 mm bore. |
| 72 | S&F 110mm PVC (SWR) \"P’ trap |
| 73 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 74 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 75 | S&F 50mm PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement. |
| 76 | Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store. complete all as specified. |
| 77 | All as per item No. 76 here-in-before but 20mm dia . |
| 78 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girthin brick wall etc complete all as specified. |
| 79 | S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified. |
| 80 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 81 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 82 | Supply and fixing in CPVC 20mm Brass Elbow |
| 83 | Supply and fixing in CPVC 20mm Brass Tee |
| 84 | Supply and fixing in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) |
| 85 | Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) |
| 86 | Supply and fixing in CPVC 25mm Tank Adaptor |
| 87 | Supply and fixing in CPVC 25mm Union |
| 88 | Supply and fixing in CPVC 20mm Ball valve |
| 89 | Supply and fixing in CPVC 25mm Ball valve |
| 90 | S&F in repairvitreous china pedestal pattern wash hand basin (flat back) white of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,including cutting for and pinning in ends of brackets completeall as specified. |
| 91 | S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap(excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc.complete all as specified. |
| 92 | S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified. |
| 93 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm borecomplete all as specified. |
| 94 | S&F 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outletscrewed for pipe or connectionsincludingnecessary packing, unionand cap and fixed complete all as specified. |
| 95 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections andmixed in position complete in all respect as specified. |
| 96 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified. |
| 97 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 98 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified. |
| 99 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified. |
| 100 | S&F PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified. |
| 101 | S&F in repair CP brass Wallmixer system with L bend incl (provn for Over Head shower) , 15mm bore chromium plated fancy type complete all as specified. Make (CAT PART NO F2002401 CERA or equivelant) |
| 102 | S&F in repair CP brass wall mounted kitchen sink mixer system with 190mm long swivel spout, connecting legs and wall flanges, 15mm bore chromium plated fancy type complete all as specified. Make (CAT PART NO F1015501 CERA or equivelant) |
| 103 | S&F in repair CP brass pillar cock with coin slot aerator (centerset installation type), 15mm bore chromium plated fancy type complete all as specified. Make (CAT PART NO F1014101 CERA or equivelant) |
| 104 | S&F in repair angular two way angle cock with wall flange, 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified. |
| 105 | S&F in repair for 15 mm dia stop valve/angle valve, cast copper alloy screwed down high pressure, fancy type chromium plated screwed both ends for iron pipe or unions complete all as specified. |
| 106 | S&F in repair bib tapslong body,brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket with water saving aerator complete all as specified. |
| 107 | S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified. |
| 108 | S&Fin repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including one number chromium plated waste fittings 40 mm dia & waste pipe complete all as specified and as directed. |
| 109 | S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 110 | Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified. |
| 111 | S&F for rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical verticalwith closed top) hoisted and fixed in position all as per SSR Part I complete all as specified. |
| 112 | S&F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified. |
| 113 | M&L for preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 114 | M&L for preparation of old painted surfaces of steelof any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 115 | S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, includingdecorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps tofixed towalls complete all as specified. |
| 116 | S&F in repair 100 mm chromium plated grating (Cat No. FT-62) Make: Prayag/Equivalent |
| 117 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 118 | S&F MSframed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 119 | S&F Hard drawn steel wire fabric weight per square metre n. exc 4kg cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete all as specified and directed. |
| 120 | M&L prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 121 | Dismantling of boarding of any description, fixed in any position with nails . |
| 122 | Supply & Fixing of 18 mm thick Rajshri WPC celluka ply of plain colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by Engr-in-Charge. |
| 123 | Supply & Fixing of 18 mm thick Rajshri WPC celluka ply of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters complete as per specifications and as directed by Engr-in-Charge. |
| 124 | Supply & Fixing of 12 mm thick Rajshri WPC celluka ply of plain white colour fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides completeas per specifications and as directed by Engr-in-Charge. |
| 125 | Supply & Fixing of 6 mm thick Rajshri WPC celluka ply of plain white colour fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides completeas per specifications and as directed by Engr-in-Charge. |
| 126 | Supply & Fixing for 20 mm wide & 1 mm thick PVC edge bending of PVC pasted on edges with suitable adhesive completeas per specifications and as directed by Engr-in-Charge. |
| 127 | Supply & Fixing of auto closing hinges openable at 0 degree for kitchen cabinet shutters completeas per specifications and as directed by Engr-in-Charge. |
| 128 | Supply & Fixing of Ball bearing runners 45 mm telescopic channel (20 inch) full extension load capacity 50 kgs (Make: Hettich,Ebco,Prime) |
| 129 | Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet/cupboard shutters (Make: Hettich,Ebco,Prime) |
| 130 | Supply & Fixing of chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 558x500 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime) |
| 131 | Supply & Fixing of chromium plated stainless steel wire basket (cup and saucer basket) pull out type size 558x300 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime) |
| 132 | Supply & Fixing of chromium plated stainless steel wire basket (Jar basket) pull out type size 585x150 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime) |
| 133 | Supply & Fixing of chromium plated stainless steel wire basket (Thali basket) pull out type, size 380x500 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime) |
| 134 | Supply & Fixing of chromium plated stainless steel wire basket (Cutlery basket) pull out type, size 380x500 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime) |
| 135 | Supply & Fixing of chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 380x500 mm with necessary sliding frame structure etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime) |
| 136 | Supply & Fixing of chromium plated stainless steel wire basket (Storage/plain basket) pull out type, size 380x500 mm with necessary fixing clips etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime) |
| 137 | Supply & Fixing of chromium plated stainless steel wire basket (Bottle pull out) pull out type , size 150 to 200 mm with necessary sliding frame structure etc complete as per specifications and as directed by Engr-in-Charge. (Make: Hettich,Ebco,Prime) |
| 138 | S&F 75 mm Butt hinges, Stainless steel and fixed complete all as specified. |
| 139 | S&F 150 mm tower bolt, Stainless steel and fixed complete all as specified. |
| 140 | S&F mild steel Godrej pattern cupboard with back, sides, top, bottom, 02 shelves & mild steel shutter two leaves with frame , incl necessary fittings of 18 gauge MS sheet with locking arrangement and handle etc all as per Godrej pattern with duplicate keys including necessary fittings & 19mm stainless steel rod for hanging cloths & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos fasteners.The cost of fasteners & grouting themis deemed to be included in unit rates complete all as specified and as directed.Note:- Superficial area shall be measured, Approx Size (1200x1900x600mm) . |
| 141 | S&F door seal bottom with aluminium plate and rubber insulation 42\"\" x 1.5\"\"complete all as specified and directed. |
| 142 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 143 | M&L for Cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concretecomplete all as specified and directed. |
| 144 | M&L for 40mm thick damp proof course in cement concrete 1:2:4, type B-0 tohorizontal or vertical surfaces including necessary formworkcomplete all as specified and directed. |
| 145 | Returning, filling in, including spreading, levelling,watering and well ramming in layers not exc 25 cm thick with soil etccomplete all as specified and directed. |
| 146 | Removing excavated material to distance not exc50 metre and depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge |
| 147 | M&L for Providing precast cement concrete louvres and jallies, 25 mm thick type B-0 1:2:4 (using 12.50 mm graded stone aggregate (measured solid), including all mouldings but excluding frame , set in cement mortar (1:6) complete all as specified and as directed. |
| 148 | M&L for Providing precast cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to matchcomplete all as specified and directed. |
| 149 | M&L for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etccomplete all as specified and directed. |
| 150 | M & L preparation of new plastered surfacesof walland applying two coat of cement based paint over a coat of alkali resistant primercomplete all as specified and directed. |
| 151 | Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody for reuse or taking in schedule of credit and making good disturbed surfaces of walls, floors etc all as specified as directed. |
| 152 | Dismantling and taking down fluorescent tube light Single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for reuse or taking in schedule of credit. |
| 153 | Taking down unserviceable sub main wiring of any type/size including wires, conduits,bends, tees/battens etc complete all as specified and directed by Engr-in-Charge. |
| 154 | Taking down unserviceable MCB, MCCBDB\"s/AC\"s box with MCB/MCCBto deposit in store for keeping in safe custody for reuse or taking in schedule of credit of any size/rating complete all as specified and directed by Engr-in-charge. |
| 155 | M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and including concealedPVC conduit size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal boxof suitable size with 3mm thick plastic laminated sheet cover / modular white cover plate with frame as required module & modular metal flush box as required module for mounting switch, socket and fan regulator along with earth wire of PVC insulated, unseathed,1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and making good, disturb surface as it is, all asspecified and directed for the following. Note :- Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green |
| 156 | One light pointcontrolled by one,one wayswitch. |
| 157 | One ceiling fan/exhaust fan/Air ciculator /bell point controlled by one way switch. |
| 158 | Socket 3 pin 5 Amps on the same board, complete all as specified. |
| 159 | Socket 3 pin 5 Amps on independent board , complete all as specified and directed. |
| 160 | M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through in and including concealedPVC conduit size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal boxof suitable size with 3mm thick plastic laminated sheet cover / modular white cover plate with frame as required module & modular metal flush box as required module for mounting switch, socket and fan regulator along with earth wire of PVC insulated, unseathed,1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and making good, disturb surface as it is, all asspecified and directed for the following. Note :- Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green |
| 161 | M&L in replacement for sub main wiring with two Single core 2.5sqmm stranded copperconductor PVC insulated and unsheathed cable ISI- marked in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 2.5 Sqmm PVC insulated unsheathedcopper conductor ISI- marked as earth wire complete all as specified and directed by Engr-in-charge. |
| 162 | All as per item No 157 herein befoe but submain wiring with 2x4Sqmm and 1x4 Sqmm as earth wire Complete all as specefied and directed. |
| 163 | All as per item No 158 herein befoe but submain wiring with 2x10Sqmm and 1x10 Sqmm as earth wire Complete all as specefied and directed. |
| 164 | S&F of socket outlet 5 pin 5 Amps 240 volts AC 50 hz ISI marked flush type complete all as specified and directed by Engineer-in-Charge. |
| 165 | S&F of socket outlet 2-in-1, 6 pin 5 amp and 15 amps 240 volts AC 50 hz ISI Marked all as specified and directed by Engineer-in-Charge. |
| 166 | S&F ofswitch piano type 5 amp one way 240 volts AC 50 hz ISI Marked complete all as specified and directed by Engineer-in-Charge. |
| 167 | S&F of switch piano type15 Amps one way 240 volts AC 50 hz ISI Marked complete all as specified and directed by Engineer-in-Charge. |
| 168 | S&F of bell push flush type 5 amp one way ISI Marked complete all as specified and directed by Engineer-in-Charge. |
| 169 | M&L for bell electric heavy duty Ding Dong type 230 volts Single pole complete all as specified and as directed |
| 170 | S&F in electronic fan regulator Step type 120 V 100 watts complete all as specified and directed by Engineer-in-Charge. |
| 171 | S&F of ceiling rose surface bakelite 63 x50mm three terminals completeall as specified and asdirected by Engineer-in-Charge. |
| 172 | Supply & fix Single Pole & netural enclosure with a two pin and earth Plug and Socket 240 volt complete with one single Pole MCB of Cap 20 Ampscomplete all as specified and directed |
| 173 | S&Fof sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 12 ways 240 V including fixing in new location with connection of circuit and submain as per site requirement complete all as specified and as directed . Note- (a) MCBs are to be measured and paid seperately. (b)Make ofMCBs and DB should be same.(c) Extra circuit length where DBs are to be shifted from existing location to new location shall deemed to be included in the quoted rate. Make-Havells/Indoasian/Legrand, |
| 174 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and as directed by Engr-in-Charge. Make- Orient/Crompton/Havells |
| 175 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm complete as directed.Make:- Crompton/Havells/Orient |
| 176 | Supply and fixheavy duty copper wound exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep 1400 RPMDouble bearing with, 04 nos blades,frame,legs and louver complete with making arrangement for fixing of exhaust fan on steel/Aluminium framewindow/ making opening in brick wall as per site requirement and also making good to disturbed surfaces as per matching to existingcomplete all as specified and as directed by Engr-in-Charge Make:- Crompton/Havells/Orient |
| 177 | Supply and fixing LED building light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and L shape GI pipe bracket of 40 mm dia. complete. |
| 178 | S&F MCBs240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI markedto be fixed on DB . (DB will be measured and paid separately under respective items of sch A):- |
| 179 | (a) MCBC curve SPN 40 to 63 Amps. |
| 180 | (b) MCBB curve SP 5 to 40 Amps |
| 181 | Supply and fixLED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeall as specified and as directed .Make :- Phillips/ Bajaj/CG |
| 182 | Supply and fixLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completeall as specified and as directed . |
| 183 | Supply and fix electric water heater, storage type with glassline MS tank and outer body made out of ABS & PP, heating element of 2 KW storage capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, SS braided connection pipe (02 Nos) of suitable length etc complete all as specified and as directed by Engr-in-Charge.Make:-Racold /Havells/Crompton from from list of makes |
| 184 | Supply and fix in replacement electric water instant heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 3 litre, BEE rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 185 | M&L for earthing complete with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI wire 4 mm Dia as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified includingproviSI-on 20 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation andearth work & connecting the earthing to an earthing test point complete all as specified & directed . |
| 186 | NOTE: (i) The concrete pit shall be PCC 1:3:6 type C-140 mm thick pre cast cover slab of RCC(1:2:4) type B-1 uSI-ng 20 mm graded stone aggregate reinforced with 8 mm TMT bars @ 10 cm C/C on both SI-des with suitable cast iron handle shall be provided in lieu of cost iron cover shown in the electrical plate No.3 of MES SSR Part -1 (ii) item includes the cost of 7.5 m GI pipe for protection of GI wire.(iii) PCC pits extra cost of addtional length of watering pipe,bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length Galvisedwire 4 mm dia. |
| 187 | Supply and laying galvanised iron pipe, medium grade 20 mm bore with all new fittings bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc. of reqd size) trenches including jointing material etc complete all as specified and directed. |
| 188 | Supply and laying galvanised iron pipe, medium grade 50 mm bore with all new fittings bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc. of reqd size) trenches including jointing material etc complete all as specified and directed. |
| 189 | S & F Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 20 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-Charge. |
| 190 | Excavation in trenches not exc. 1.5 m wide and notexceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on planand getting out in soft/loose soil. |
| 191 | Returning,filling including spreading, leveling watering and well ramming in layers not exceeding 25 cm as directed. |
| 192 | Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point |
| 193 | Cuttingexisting 50 mm bore GI wter supply pipe line in position for insertion for new tee for taping new pipe line with existing complete all as specified |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
