|
| 1 | Material and Labour for Aluminium strip 25 x 3.15mm fixing in wall, floor and roof with insulator and fixing accessories for mounting of Earth strip including taking down the existing one and making good and the disturbed surface complete all as specified and directed. |
| 2 | Material and Labour for Galvanized strip 32 x 6mm fixing in wall, floor and roof with insulator and fixing accessories for mounting of Earth strip including taking down the existing one and making good and the disturbed surface complete all as specified and directed. |
| 3 | Material and Labour for Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed. |
| 4 | Supply and fix Galvanised steel water tubing medium grade 40mm bore, ISI marked with all fittingsfixed on walls/ceiling or laid in floors for Air termination etc.,complete all as specified and directed. |
| 5 | Material and Labour for PCC (1:3:6) type C1, using 20mm graded stone aggregate as in plinth course, bed plates etc., for fixing of Air termination on roof top complete all as specified and as directed. |
| 6 | Material and Labour for Test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screws complete all as specified and as directed. |
| 7 | Material and Labour for earthing complete with galvanised steel earth plate electrode 60 x 60cm x 60mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 32 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/ dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 40mm dia medium grade GI pipe for earth strip protection upto test terminal box. Suitable C.I top cover with handle funnel stainer, salt & charcoal and testing on completion all as specified and directed. |
| 8 | Dismantling/ Taking down old u/s street lights pole of any size, including disconnecting of existing Electrical connection, dismantling of PCC coping, Earth work excavation, removing of existing steel tubular pole of any size and taken on credit complete all as specified and as directed. |
| 9 | Supply and fix in repairs Hot Dip GalvanizedOctagonal street light pole of 4.20 metre height from above ground level to light fitting with Bottom-130mm, Top-70mm and thickness-3mm, door opening 90 x 350mm including Base Plate of size 200X200X12 mm, Foundation Bolts M16 X 600mm - 4Nos with single type arm bracket 1000 mm long made of 48 mm outer dia pipe suitable for 30 Watts LED solar street light fitting including excavating in post holes in any kind of soil complete all as specified and as directed. |
| 10 | Supply, Fixing in repairs and installed of all in one solar street light NG series AIO of 30 watt (LED) is made inbuilt BMS technology, high efficacy LED, MPPT solar charge controller and aluminium extruded body and is specially programmed to automatically control the dimming and brightness of light which increases the backup time recommended by the OEM complete all as specified and directed .Note : The unit rate quoted shall be deemed to include the cost of 2 years maintenance from the certified date of completion of work. |
| 11 | Material and Labour for PCC (1:2:4) type B2 (using 40mm stone aggregate) as in foundation filling and mass concrete for pole including necessary form work complete all as specified and as directed. |
| 12 | Material and Labour for PCC (1:3:6) type C2 (using 40mm stone aggregate) as in foundation/ Coping of pole including necessary form work and applying three coats of white wash complete all as specified and as directed. |
