Tender For Certain Repair To Mes Installations & Bso Yard Under Age B/R-Ii At Nams; 1 Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm eachcomplete all as specified and directed. 2 S&F, 35 mm thick, 2nd class hard wood,glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a)complete all as specified and directed. 3 S&F for 35mm thick flush shutters, solid core construction, with blockboard core and plywood face panels, commercial type on both sides complete all as specified and directed. 4 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solventement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as per manufacturers instructioncomplete all as specified all as specified. 5 S&F powder coatedaluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron) 6 S&Faluminiumpowder coated shutter (for doors) wighing 0.55 kg/mincluding necessary jointing cleats, glazing clips, rubberbeading with neoprene packing anodized handle 2 no in each, locking arrangement(mortised) and aluminuium anodised tower bolt 200 mm long aluminium snap beading screws complete all as specified. 7 S&F aluminiumpowder coated shutter (for window and ventilator) side hung type without sash, aluminium section wighing 0.55 kg/mincluding necessary jointing cleats,glazing clips, rubberpacking, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no.) hinges type B-21 100mm long( 2 no) suitable handle (1 no) complete all as specified. 8 S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and directed 9 Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. 10 S&F in repair for3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed. 11 S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 12 S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 13 S&F in repair Aluminium body door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. complete all as spd and directed by Engr-in-charge. 14 S&F stainelsss steel butt hinges 100mm size fixedtoframes any types all as specified and directed by Engr-in-charge. 15 S&F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed. 16 S&F aluminium anodised barrel tower bolts 150 mm size of extruded section and fixed ISI marked complete all as specified and directed. 17 S&F aluminium alloy, anodised, sliding door bolt 250 mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. 18 S&F in repairs 300mm long mild steel ordinary rat tail rod pattern spring with roller plateincluding fixing with nails/ bolts or welded complete all as specified and directed. 19 Dismantling of brick works in cement mortar complete all as specified and directed. 20 M & L for brick work with sub class B bricks in Cement motar (1:6) straight or curved on plan exc 6 mtrs mean radius,complete all as specified and directed. 21 All as per item No 20.00 above but except bricks complete all as specified and directed. 22 M&L for half brick brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls built in CM 1:4 complete all as specified and directed. 23 Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc.500 mtrs where directed complete all as specified and directed. 24 M&L for 15mm thick cement plaster in Cement motar1:4 on fair faces of brick or concrete workand finishing the surface even and fair(without using extra cement) incl WPC @3% weight of cementetc.complete all as specified and directed. Note: WPC will be measured and paid separately under appropriate items 25 M&L for rendering 15mm thick in cement mortar (1:6) on other thanfair faces of brick work or concrete surfaces of walls , finished even and smooth without using extra cementcomplete all as specified and directed. 26 Supply only, integral water proofing compound. completeall as specified and directed. 27 M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. 28 M&L for applying two coat of cement base paint over a coat of alkali resistant primer including preparation of newly plasterd or previously untreated surfaces of walls, pillars cornces etc complete all as specified and directed. 29 M&L for preparation of new or previously untreated steel surfaces of any description, over 0.06 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. 30 M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 06 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. 31 M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. 32 M&L for Glazed ceramic coloured tiles of size 300mm x 450 mm x 7mm thick verticale tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set &jointed in neat cementslurry and pointed inwhite or coloured cementto matchincl dismantling / demolitionand e colour oftiles,incl dismantling / demolitionover and includingrendering10mm thick in cement mortar (1:4) , complete all as specified and directed. 33 M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub baseto receive floor finishes including demolition of PCC complete all as specified and directed. 34 M&L Machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurryincl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. 35 S&F Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand mortar 1:4, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as specified and directed. 36 M&L forPlain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concreteincluding dismantiling PCC complete all as specified and directed. 37 M&L for 100mm thickPCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as specified and directed . 38 S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl taking down old pipe complete all as specified and directed. 39 S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floorincl taking down old pipe complete all as specified and directed. 40 Supplying , fixing & Hoisting and fixingin position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixedcomplete all as specified and directed. 41 Supplying , fixing & Hoisting and fixingin position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixedcomplete all as specified and directed. 42 Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed. 43 Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. 44 M & L for 50mm avarage thicknessPCC 1:2:4type B1 (using 20 mm graded stone aggregate as in roof padding ,complete all as specified and directed. 45 M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/SqmincludingAPP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed. 46 M&L, 40 mm thick brick tiles laid over 15mm thick cement motar (1:6) and joints grouted flush in cement Motar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed. 47 ditto-as per ser item No 46.00 above but except bricks tiles complete all as specified and directed. 48 S&F in repair Vitreous China wash hand basin (WHB) white,flat back size 550x400mm including CP waste coupling 32mm bore, incl 32 mm dia PVC waste pipe complete all as specified. 49 S&F in repairfor viterous china squating pan of (Orrissa Pattern) size 580 x 440 white with P or S trap front or back inlet and integral foot rest ,including joining, filling and provision of cement concrete bedding 1:5:10, type E2 (excluding flushing cisteern and flush pipe) fixed inclcement concrete bedding as required set complete all as specified and directed. 50 S&F in repair for viterous china wash down water closet pan (pedestal pattern) coloured includingP or S trap with flush pipe of chromium plated brass 32 mm dia for low levelflushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed. 51 S&F in repair10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, lowlevel, with inlet, ball valve, float, and handle and bracketsincluding 32mm dia flush pipe of polyethylene ofhigh density for low level cistern complete all as spd and directed by Engr-in-charge. 52 S&Fin repair 450 mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed. 53 S&F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or buttewrfly handle screwed down to iron pipe with all fittings complete all as specified and directed. 54 S&F in repair 15 bore dia chromium plated Stop cock/Angle cockscrewed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed. 55 S&F for in repair 15 mm bore swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed. 56 S&F in repairbrass Chromium plated shower rose 125 mm size with or without swivel joints, any size with arms , including fixing to steel pipe or union complete all as specified and directed 57 S&Fin repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed. 58 S&F in repairs grating doom 125mm dia PTMTwith waste hole (Min weight 40 grms) complete all as specified and directed. 59 S&F 75 mm bore PVC (SWR)pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed. 60 S&F 110 mm bore PVC (SWR)pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed. 61 S&F110mm bore PVC (SWR) bends any radius Without access door complete all as specified and directed. 62 S&F 75mm bore PVC (SWR) bends any radius Without access door complete all as specified and directed. 63 S&F 110 mm bore( SWR) vent cowl complete all as specified and directed. 64 S&F 110mm bore PVC (SWR) junction single/double, (single/double T), equal or unequal with access door complete all as specified and directed. 65 S&F 75 mm bore PVC (SWR) junction single/double, (single/double T), equal or unequal with access door complete all as specified and directed. 66 M&L 75mm bore PVC (SWR) floor trap ,plain with CP grating including jointing with solvent cement complete all as specified and directed. 67 Dismantling wrought iron or mild steel work of any description of framed trusses, post , purlins after etc complete all as specified and directed. 68 S&F mild steel Gde Fe-410-W Gde E-250 quality A as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces , cleats etc complete all as specified and directed. 69 S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour profile AZ-150 with side lap as in roof covering/ cladding to wall, fixed with L or J hooks / self tapping screws and incldismantling of plain or corrugated steel sheeting in roof covering all as specified and directed. 70 S&FPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridge hipe valleyto wall, fixed with self tapping screws complete all as specified and directed. 71 S&F in repairMortice lock, vertical type, size 100 mmdoor lock 4 lever baras complete all as specified and directed. 72 S&F, in repairs, 20 mm thick, PVC sheet one side prelaminated of approved texture (Celuca Ply of Rajshree make or equivalent inas approved by GE) as in Kitchen cabinet, shelves, cupboard shutters etc and like incl making with nails, screws etc complete all as specified and directed. (Note:-Each member i.e. shelf, partition & shutter of kitchen cabinet shall be measured and paid separately) 73 Maintenance and overhaulingof Steel rolling shutters (without taking down) opening size2 to 16 Sqm by opening the top hood and cleaning, oiling, greasing and making free flow of shutters on its guide channels complete including cleaning, oiling, greasing of gear assemblyall as directed and includingtwo coats of synthetic enamel paint after preparatiopn of old surfaces complete all as specified and directed. 74 S&F, in repair, Steel rolling shutters, thickness of laths1mm thick, with out ball bearing, as specified including top cover, an-choring rod, hasp and staple includingone shop coat of primer, and erected in position as indicated, push pull or manual type complete all as specified and directed. 75 Excavating in post holes(or similar holes )each n.exc. 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth round in layers n.exc. 25 cm in any kind of soil, watering and removing surplus soil to a distance n exc 50m an making good to surface 76 M&L for cement concrete type C-2 1:3:6 (40mm graded aggregate) as in foundation filling,post holescomplete all as specified and directed. 77 S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) 78 Dismantling of fencing mesh with wire of any type and any description complete all as specified and directed. 79 Supply only MS galvanised chain link fencing any size any type complete all as specified and directed. 80 Fixing only chain link fencing including line wires, any shape, any mesh, size, rails, straining bolts etc complete all as specified and directed. 81 Dismantling of structural steel work including doors, gates and similar structure complete all as specified and diretced 82 M&L for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.), Nut & bolt including all necessary drilling,etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.Note : Unit rate is also included for locking holes with wire after fixing of barbed wire and welding to bent up portion as directed. 83 M&L for mild steel round bars 10mm dia Fe 410- Gde E-250 around fencing hooking,welding and straining properly to fencing complete all as specified and directed. 84 Demolition of stone slabs and tileslaid, bedded and pointed in any mortar of any description or thickness as in floors,aprons,riser and steps etc complete all as specified and directed. 85 M&L for Granite 18-20 mm thick (table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid over 15 mm thick cement mortar 1:4 including pointing with coloured pigment using marble dust to match with shade of granite and rounding the edges of granite stone slabs wherever required complete all as specified and directed. 86 M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes,drain or ductetc) and similar work including necessary form work and set in CM 1:6incl dimolition of old slab complete all as specified and directed. 87 Mild steel TMT bars 8 to 10 mm diacut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips , including welding with mild steel completed all as specified and directed 88 M&LforForming Construction joint 30mm deep x10mm wide filled with sealing compound all as specified and directed. 89 M&L forForming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of Grade B complete all as specified and directed. 90 M&L for applying one coat of synthetic enamel paint on steel surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed. 91 M&L for applying one coat of cement base paint on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. 92 M&L for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered/painted surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss incl filling holes necessary where required with putty as in pathces or nail holes to obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. complete all as specified and directed. 93 M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescence salts and treading oil and gresy spots, brooming down or steel wire brushing removing nails making good holescracks etc on old plastered/painted surfaces and applying one coat of white wash on ceiling surface incl filling holes necessary where required with putty as in pathces or nail holes to obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. 94 M&L for applying one coat of synthetic enamel paint on wooden surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.
