|
| 1 | Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 2 | M & L for5 mm thick rendering in CM 1:3 on ceilingfinished even and smooth on wall complete all as specified and directed. |
| 3 | M & L for10 mm thick rendering in CM 1:6 on brick or concrete surfacesfinished even and smooth on wall complete all as specified and directed. |
| 4 | M & L for15 mm thick rendering in CM 1:4 on brick or concrete surfacesfinished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall complete all as specified and directed. |
| 5 | M & L for preparation of newly plastered / unplastered surfaces of ceiling surfaces and applying two coats of white wash complete all as specified and as directed. |
| 6 | M & L for preparation of newly plastered / unplastered surfaces of walls and two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified and as directed. |
| 7 | M & L for preparation of new plaster surface of wall and applying two coats ofPremium Acrylic Smooth exterior paint with Silicone additives of required shade@ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqmcomplete all as specified and directed. |
| 8 | Supply only integral liquid water proofing compound |
| 9 | M&L for two coats of french polishing on surfaces of any description, width or girth including cleaning and preparing the surfacecomplete all as specified and directed. |
| 10 | M & L for taking down/demolition of existing WPT with screed concrete of any description including old PCC padding etc. roughening surfaces of old concrete floors / slabs and washing down with water to remove dust/debries particles complete including preparation of surface to receive plastering and removal of debries outside MD land complete all as specified and directed. |
| 11 | M&L for 40mm thick PCC 1:2:4 type B-1( using 20 mm graded stone aggregate), in floorand steps, landing etc. including finishing the surface even and smooth without using extra cement complete all as specified & directed. |
| 12 | M & L rendering 10 mm thick cement plaster in CM 1:4 onroof surface with WPC complete all as specified and directed. |
| 13 | M & L for roof treatment using APP based polymeric membrane minimum weight 3.5 kg/sqm and3 mm thickreinforced with polyster non woven fabric (weight not less than 150 gms/sqm) over a coat of primed and bonding surface by forced application, including taking down old felt complete all as specified and directed. |
| 14 | M&L for preparation of new surface andpainting one coat with aluminium paint of approved brand and manufacture to give an even shade on new surface of APP membrane and rolling shutter etc complete all as specified and directed. |
| 15 | Taking down MS cover over rolling shutter, removingdust shutter steps, cleaning of shaft, springs, crankshaft,gear aggangement and cleaning of all accessories with lub old and greesing and refixing same position. |
| 16 | Taking down Chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters and grill from the frames) complete all as specified and directed. |
| 17 | Taking down Chowkats or frames exc. 1.50 Sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 18 | Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 19 | Supply and fix powder coated anodised aluminium frame for windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed. |
| 20 | Supply and fix powder coated anodised sliding type/hung type aluminium door and window shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) if required etc, complete all as specified and as directed. |
| 21 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the window frame and similar work all as specified and directed. |
| 22 | S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 23 | M & L for preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 24 | S & F 5mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares exc 0.50 sqm in each pane complete all as specified and as directed. |
| 25 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed. |
| 26 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rate includes M.S. hold fast/ lugs or SS dash fasteners ).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 27 | All as per serial item No 26 above but of Frame size 65x 125 mm |
| 28 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) andnon toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges shall be paid separately) |
| 29 | S & F of solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube, suppling and fixing in opening complete. |
| 30 | S & F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel moulded both side Prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles prelam PVCsheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of both sidePrelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement. |
| 31 | All as per Item above but Factory made wire gauzed door shutter 30 mm thick(style)i.e. panel will be ofin lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly |
| 32 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial with both face is covered with deco rative face veneer with lipping/frame to match all as specified and directed |
| 33 | S & F Stainless steel medium weight, cold rolled mild steel of size 75 mm complete all as specified and directed. |
| 34 | S & F for SS butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed . (for wooden doors) |
| 35 | S & F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed . |
| 36 | S & F for 150 mm sizealuminium anodised barrel tower boltof extruded sectioncomplete all as specified and directed . |
| 37 | S & F for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 38 | Hacking out old broken glass (any thickness, size, quality ordescription) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 39 | S & F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each. |
| 40 | All as per serial item No 39 above but 3.00 mm thick figured glass. |
| 41 | S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed. |
| 42 | Refixing only shutter in same opening of any description exc 1 Sqm but n. exc 2 Sqm eachin same opening complete all as specified and as directed. |
| 43 | Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm eachin same opening complete all as specified and as directed. |
| 44 | Taking down and refixing of door frames and Shutters with Resecuring, easing, adjusting and refixing in same opening of any description with shutters area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existingcomplete all as specified and as directed. |
| 45 | All as per serial item No 44 above but area n.exc 1.5 Sqm complete. |
| 46 | Taking down shutters and refixing Resecuring, easing, adjusting and refixing of any descriptionexc 1 Sqm but n exc 2 Sqm each complete all as specifed and directed. |
| 47 | All as per serial item No 46 above but area n.exc 1 Sqm complete. |
| 48 | S & F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size complete all as specified and directed . |
| 49 | S & F in repairs for butt hinges medium weight cold rolled mild steel of 75 mm size complete all as specified and directed . |
| 50 | S & F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed . |
| 51 | S & F in repairs for 100 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed . |
| 52 | S & F in repairs for 150 mm sizealuminium anodised barrel tower boltof extruded sectioncomplete all as specified and directed . |
| 53 | S & F in repairs for 100 mm sizealuminium anodised barrel tower boltof extruded sectioncomplete all as specified and directed . |
| 54 | S & F in repairs for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 55 | S & F in repairs 150 mm long aluminiumplate type II hook & eye for window shutter complete allas specified and as directed. |
| 56 | S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed. |
| 57 | S&F in repairs 40 mm dia cub board knobs fixed with nut screw and washer of mild steel bright finished complete all as specified and as directed. |
| 58 | S & F in repairs for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed. |
| 59 | S&F in repair 100 mm size mortice lock with two lever (vertical type) brass body and fixed complete all as specified and as directed. |
| 60 | S&F in repairs using plywood, grade BWR, type BB18mm thick fixed with screws to timber framework and similar works etc complete all as specified and as directed. |
| 61 | All as per serial item No 60 above but9mm thick plywood complete all as specified and as directed. |
| 62 | All as per serial item No 60 above but12mm thick plywood complete all as specified and as directed. |
| 63 | M&L Decorative type sun mica 0.9mm/1mm thickness type 1,of surface finish, colour and pattern as approved by engr-in-charge, fixed with approved adhesive as per manufactures instructions complete all as specified and as directed. |
| 64 | M & L 100mmExtruded brass handles, fabricated type polished complete all as specified and as directed. |
| 65 | S & F75mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed complete all as specified and as directed. |
| 66 | Minor repair to aluminum joinery and making serviceable the same by meance of adjustment, greacing as necessary etc complete all as specified and as directed. |
| 67 | M & L for preparation of new or previously untreated/old surface of wood of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed |
| 68 | S&F in repair 100mm long Hasp and Staple, Safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 69 | S & F in repair stainless steel fancy type curtain rod of outer dia 20 mm with bracket and all accessories (Note : Necessary Bracket including in this items in every curtain rod to be fitted) |
| 70 | S & F in repair CP Brass mixer with hand shower of 15 mm dia for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed. |
| 71 | S&F in repairs 15 mm size Stop/concealed stop/angle valves , chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to 15 mm bore pipe complete all as specified and as directed. |
| 72 | S&F in repairs 15 mm size Bib taps, chromium plated, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe complete all as specified and as directed. |
| 73 | S&F in repair 15 mm size brass CP 2 in 1 Bib Cock with wall flange complete all as specified and as directed. |
| 74 | S&F in repairs 15 mm size pillar tap(long body type) cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without letter \"HOT\" or \"COLD\" with long screwed shanks and fly nuts, screwed for fixing to 15 mm bore pipe complete all as specified and as directed. |
| 75 | S&F in repair 15 mm size brass CP 2 way angle cock with wall flange complete all as specified and as directed. |
| 76 | S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for 15 mm bore diairon pipe and fixed complete. |
| 77 | S&F in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. |
| 78 | S&F in repair Angle/ stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. |
| 79 | S&F in repair Pillar tap (Fancy type) of PTMT any colour high pressure screwed for iron pipe and fixed. |
| 80 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) including \"P\" or \"S\" Trap with necessary, fixing arrangement including plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed. |
| 81 | S&F in repair for PVC valve less syphonic action type flushing cistern 10 ltr capacitylow levelwhite with inlet ball valve, floatflush pipe and handle including bracketcomplete all as specified and as directed. |
| 82 | Supply and fix in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 83 | S&F in repair Vitreous china wash basin with pedestal, white, flat back, size 550 x 400 mm excluding taps, waste pipe, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 84 | S&F in repairs stainless steel sink, 1.00 mm thick for kitchen with plug, waste pipe, washer including cantilever cast iron bracket, connecting union overallsize 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 85 | Dismantlingof stone slab and tiles laidbedded and pointed in any mortar of any description or thickness in floors, approons etc complete all as specified and directed. |
| 86 | M & L granite slab (of any type) 20 (+/-2)mm thick machine cut bedded and jointed with greay cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including cutting and polishing complete as in cooking platform complete all as specified and directed. |
| 87 | S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guardrailing 60 cm long complete all as specified and directed. |
| 88 | S&F in repair shower rose chromium plated 120 mm (minimum) size with swivel joints suitable for 15 mm bore pipe including shower arm chromium plated 15 mm dia, 190 mm (minimum) long with bend of 45 degree complete all as specified and directed. |
| 89 | S & F bevelled edge 6mm thick mirror of selected quality glass fixed with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 90 | S&F in repairPlastic water closet seat cover soft closed white with bottom and cover fixed with aluminium hinging device complete all as specified and directed. |
| 91 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 92 | Dismantling water tanks of any type of capacityexc 250 but n.exc 500 liters and removing to store complete all as specified and directed. |
| 93 | S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in positioncomplete all as specified and directed. |
| 94 | Dismantling water tanks of any type of capacityexc 500 liters but n. exc 1000 ltrs and removing to store complete all as specified and directed. |
| 95 | S & F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 96 | M&L cleaning of the service tanks of capacity upto 500 liters twice (as directed) installed on roofs and 2nd, 3rd, or 4th stories of building at various places by emptying the tanks, by removing the scale and other all other foreign materials deposited on side wall and bottom of the tanks by scraping and brushing with wire brush and cleaning with bleaching powder slurry and allowed to dry and tajk washing and cleaning the tank with fresh water including refixing the top cover of tank properly after cleaning and writing letters such as details of the tanks like date of cleaning, capacity of tank with synthetic enamel paint with letter size 10cm heigh in block colour, over a thick of size 60x 30mm complete all as directed by Engr-in-Charge. |
| 97 | All as per serial item no 96 above but 1000 Ltr tanks, complete all as specified and directed. |
| 98 | S&F in repair of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to20 mm bore pipe complete all as specified and directed. |
| 99 | Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 100 | Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 101 | S&F 15mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed. |
| 102 | All as per serial item no 101 above but 20mm dia UPVC pipes complete all as specified and as directed. |
| 103 | All as per serial item no 101 above but 25mm dia UPVC pipescomplete all as specified and as directed by Engr-in-charge. |
| 104 | S & F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, necessary clampsfixed to walls including taking down complete all as specified and directed. |
| 105 | S & F for PVC (SWR) 110 mm bends complete all as specified and directed. |
| 106 | S & F in repair 75 mm dia PVC (SWR & RWP) floor trap plain with grating inclu. jointing with solvent cement of out let dia complete all as specified and directed. |
| 107 | S & F 75 mm dia PVC (SWR & RWP) pipes single socketedin any length with rubber ring joints fixed to wall including taking down complete all as specified and directed. |
| 108 | S & F for PVC (SWR) 75 mm bends complete all as specified and directed. |
| 109 | S&F in repairs 15mm dia swan neck taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as specified and directed. |
| 110 | S& F in repair door guard Silicon (self-adhesive type) material to protect entrance and rear door from the insect,dust and rain complete all as specified and directed. |
| 111 | M&l for preparation of old surfaces of wood and wood based surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girthcomplete all as specified and directed. |
| 112 | S&F in repairs 15mm, 20mm & 25mm GI fittings( nipples, elbows, reducers, Tee, sockets and tank nipples etc) complete all as specified and directed. |
| 113 | S&F in repairs stainless steel plate rack of size 30\"x36\"x10\" made out of 1mm thick sheetcomplete all as specified and directed. |
| 114 | Removal of air lock/ blockage in 15mm/ 20mm bore GI water tubing, cleaning the pipe and fittings etccomplete all as specified and directed. |
| 115 | M&l for preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint to steel surfaces of any description not otherwise described over 10 cm width or girthcomplete all as specified and directed. |
