|
| 1 | Dismantling tile work in floors and scarting or wall tile laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm |
| 2 | Demolishing cement concrete manually /by mechanical means including disposal of material with in 50 metres leads as per direction of engineer -in -charge. Nominal concrete 1:4:8 or linear mix (i/c equilent design mix |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) including water proofing material as per direction Eng-in-Charge. |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 5 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm. |
| 6 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) jointing with gray cement slurry @3.30kg /Sqm including pointing the joints with white cement and matching pigment etc., complete.KAJARIA/SOMANY/NITCO make. |
| 7 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm. |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer\"s specification. One or more coats on old work |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 11 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 Sqm). |
| 12 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 13 | Providing and fixing ISI marked flush door shutter confirming to IS : 2202 ( Part I )decorativre type , core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters . 35 mm thick including ISI marked stainless steel butt hinges with neccesary screws |
| 14 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) |
| 15 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10 mm |
| 16 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 17 | Providing and fixing bright finished brass handles with screws etc. complete125 mm |
| 18 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 19 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 20 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 45 x 70 mm |
| 21 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 22 | Providing & fixing wire guage shutter using STAINLESS STEEL GRADE 304 WITH WIRE OF DIA 0.5 mm and avarage width of aperture 1.4 mm in both directions for doors, window and clerestory window with hinges and necessary : 35 mm thick shutters second class teak wood |
| 23 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm |
| 24 | Renewing glass panes with putty and nail wherever necessary including racking out the old putty: float glass panes of nominal thickness 4mm ( weight not less then 10 kg/Sqm) |
| 25 | Renwal of old putty of glass panels (length) |
| 26 | Providing & fixing highdensity polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making neccesary holes for inlets , outlets over flow pipes but without fitting and the base support for tank . 500 litre with necessary all GI PIPE fittings complete . |
| 27 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 28 | Providing & fixing water closet Squating pan ( Indian type W.C pan ) with 100 mm sand cast iron P or S trap , 10 letre low level white PVC flushing cistern , including flush pipe , with manually controlled device( hand lever ) confirming to IS : 7231 , with all fiittings and fixtures complete , including cutting and making good the wall and where required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 30 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern |
| 31 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern |
| 32 | Providing & fixing wash basin with CI brackets , 15 mm CP brass piller taps , 32 mm C.P brass waste of standard pattern , including painting of fitting and brackets , cutting and making good the walls wherever require: White vitious china wash basin size 630x450 mm with a single of 15 mm C.P brass piller taps |
| 33 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm |
| 34 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screw with concealed fittinf arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm ,78 mm wide and effective height of 88 mm , weighing not less than 170 gms. |
| 35 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 36 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. Semi rigid pipe 32 mm dia |
| 37 | Providing and fixing soil, waste and vent pipes : 100 mm diaSand cast iron S&S pipe as per IS: 1729 |
| 38 | Providing and fixing soil, waste and vent pipes : 100 mm diaSand cast iron S&S pipe as per IS: 1729 100 mm dia pipe |
| 39 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm nominal dia Pipes |
| 40 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm nominal dia Pipes |
| 41 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 42 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 43 | Providing and fixing C.P. brass stop cock (concealed) of standarddesign and of approved make conforming to IS:8931. 15 mm nominal bore |
| 44 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 45 | Providing and fixing C.P. grating of approved quality and colourCircular type 125 mm nominal dia (With waste hole/without waste hole) as per direction Eng-in-Charge. |
| 46 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawlplugs etc., complete. |
| 47 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 48 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 49 | SupplyingandfixingsuitablesizeGIboxwithmodularplateand cover in front on surface or in recess, including providing and fixing 3pin5/6Amodularsocket outletand5/6Amodularswitch, connections etc. as required. |
| 50 | SupplyingandfixingsuitablesizeGIboxwithmodularplateand cover in front on surface or in recess, including providing and fixing 6pin5/6&15/16Amodularsocketoutletand15/16Amodular switch, connections etc. as required. |
| 51 | Supplyingand fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. |
| 52 | Extraforfixingthelouvers/shutterscompletewithframefora exhaust fan of all sizes. |
| 53 | Supplying and fixing PVC batten/ angle holder including connectionsetc. as required. |
| 54 | Supplyingandfixingfollowingway,singlepoleandneutral,sheet steel, MCBdistributionboard,240 V, on surface/recess,complete withtinnedcopperbusbar,neutralbusbar,earthbar,dinbar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 06Way Double door |
| 55 | Supplyingandfixingfollowingway,singlepoleandneutral,sheet steel, MCBdistributionboard,240 V, on surface/recess,complete withtinnedcopperbusbar,neutralbusbar,earthbar,dinbar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 Way Double door |
| 56 | Supplyingandfixingfollowingway,singlepoleandneutral,sheet steel, MCBdistributionboard,240 V, on surface/recess,complete withtinnedcopperbusbar,neutralbusbar,earthbar,dinbar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 Way Double door |
| 57 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles intheexistingMCBDBcompletewithconnections,testingand commissioningetc. as required. Single pole |
| 58 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles intheexistingMCBDBcompletewithconnections,testingand commissioningetc. as required. Double pole |
| 59 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 60 | Providing and fixing following rating and breaking capacityand pole MCCB withthermomagneticrelease andterminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB |
| 61 | supply and fixing following way, horizontal type three pole andneutral,sheetsteel,MCBdistributionboard,415V,onsurface/ recess, completewith tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door |
| 62 | Rewiring for light point/fan point/exhaust fan point/bell point with 1.5Sqmm FRLS PVC insulated copper conductor single core cable and 1.5Sqmm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required Group A |
| 63 | supplying and fixing piano type switch/socket on the existing box/cover including connections etc. 5/6 Swtich/socket |
| 64 | supplying and fixing piano type switch/socket on the existing box/cover including connections etc. 15/16 Swtich/socket |
| 65 | Providing & fixing 20 Watt 4\" long Led tube complete fitting with quality & make as per approved by engineer in charge |
| 66 | Providing & fixing 5 Watt 1.5\" long Led tube complete fitting with quality & make as per approved by engineer in charge |
| 67 | Providing, installation & Tesing of Transair Resersible Exhaust fan Sweep 300 mm Power inputs 70 Watts Speed 1380 RPM Air delivery 1600 (CMM) |
| 68 | Providing, installation & Tesing of decorative type Mirro light 1 Feet size (bajaj/havell/Crompton) |
| 69 | Providing, installation & Tesing ofdecorative type ceilling light 150 mm rectangular/circular as per direction Eng-in-charge. |
| 70 | providing and installation of 8 or 12Watt Bulb on existing holder. |
| 71 | providing and installation of 8 or 12Watt Bulb on existing holder. |
| 72 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x 16mm |
