|
| 1 | Taking down cement plaster of any description on brick or concrete surfaces etc. including racking out joints hacking for key, scrubbing down with water etc from walls and ceiling surfaces complete all as specified and directed. |
| 2 | M&L for rendering 12mm thickin cement mortar 1:6 on brick or concrete surfaces of walls, finished surface even and smooth without using extra cement completeall as specified and directed. |
| 3 | M&L for rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished surface even and smooth without using extra cement completeall as specified and directed. |
| 4 | M&L for 15 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement of any shape, any size including taking down existing plaster incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 5 | M&L for rendering 5mm thickon ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:2:4) (using 12.5mm graded crushed stone aggregate) and reinforced with 10mm dia TMT bars with or without facia and finished with cement sand mortar (1:3) using coarse sand in pathches area n.exc 5 sqm each and thickness of RCC member exc 50mm including applying two coats of finishesto match with the existing surfaces inany height complete all as specified. (Note: - Cost of formwork and welded mesh, bldg height upto 12 mtr shall be deemed to be included in unit rate quoted by the Contractor). |
| 7 | M&L for preparation of new plastered surface and applying two coats of Oil bound distemper over a coat of primer on wallcomplete all as specified and directed. |
| 8 | M&L for preparation of new plastered surface and applying three coats of white wash on wall complete all as specified and directed. |
| 9 | M&L for preparation of new plastered surface and applying two coats of cement base painton wall over one coat of alkali resisting primercomplete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for preparation of old surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescencesalts and trading oil and greasy spots on existing distempered surfaces and applying two coats of oil bound distemper (acyrlic) over a coat of 1mm thick wall puttyon wall incl cleaning the floor/ joinery, surfaces, glass pans complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for preparation of old plastered surface of walls by rubbing down, making good holes, cracks, etc and stopping etc on existing distempered surfaces and applying one coat of oil bound distemper (acyrlic) on wall incl cleaning the floor/ joinery, surfaces, glass panes complete all as specified and directed by Engr-in-Charge.(Note :- Paint using Airless spray technology with max working pressure of3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be ofreputed make). |
| 13 | M&L for preparation of old plastered surface of walls by rubbing down, making good holes, cracks, etc and stopping etc on existing distempered surfaces and applying one coat of cement base paint on wallheight upto 12m incl cleaning the floor/ joinery, surfaces, glass panes complete all as specified and directed by Engr-in-Charge. (Note :- Paint using Airless spray technology with max working pressure of3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed make). |
| 14 | M&L for preparation of old plastered surfaces of ceiling by brooming down, making good holes, cracksand applying one coat of white wash incl cleaning the floor/ joinery, surfaces, glass panes complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for preparation of old plastered surfaces of wall by brooming down, making good holes, cracks, etc and applying one coat of white wash height upto 12m incl cleaning the floor/ joinery, surfaces, glass panes complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L preparation of old painted wooden surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 17 | M&L preparation of old painted steelsurfaces exc 10cm in width or girthand applying one coat of synthetic enamel paintheight upto 12m complete all as specified and directed. |
| 18 | S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm including beads complete all as specified and directed. |
| 19 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm each including hacking out old broken glass complete all as specified and directed. |
| 20 | Cutting down plants/shrubs of girth n.exc. 15cm from roof tops/sides of external walls of bldg, chajjas, wall junction etc including taking out penetrated roots in to the wall, slab surfaces and applying \"STUFALO\" solution (herbal medicine) as per manufacturer\"s instructions in and around the surfaces and making good the location with PCC 1:2:4 and CM 1:2 including necessary scaffolding upto 12m height from ground level complete all as specified and directed. |
| 21 | M&L for preparation of old plasteredsurfacesof wallby brooming down, making good holes, cracks etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paintetc by skilled labour with mechanical sander having RPMof 1500 - 2700 rpm, with internal dust extraction system for clean environment and preparation of old plastered/ scrapped surfaces of wall/ ceiling by filling cracks by external wall putty/ crack fill paste and applying exterior water proof wall care putty @ 1 kg (undiluted) per sqm of average thickness 1mm to 2mm over the prepared plastered wall/ ceilingsurfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for making the surfaces even and smooth for receiving primer andapplying two or more coats of 100% premium acrylic emulsion painthaving VOC less than 50 gm/litre and UVresistance asper IS 15489-2004, alkali and fungal resistance, dirt resistance exterior paint of required shade ( company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coatof exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as directedby Engineer-in-Charge.(Note :- Paint using Airless spray technology operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed make). |
| 22 | Supply only integral water proofing compound. |
| 23 | S&F rotational moulded polyethylene water storage tank ISI marked, (white) of 1000 ltr capacity (cylinderical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceble water tank complete all as specified & directed. |
| 24 | S&F in repair 20 mmfloat ball brass valve, high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 25 | S&F in repair PVC (SWR ) bends 110 mm bore any radius complete all as specified and directed. |
| 26 | S&F stack clamps for 100 mm bore pipe, made out of 50mm x 5mm galvanised iron flat and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof all as specified and directed. |
| 27 | S&F 110mm bore PVC (SWR) ISI marked pipe single socketed in any length with rubber ring joints fixed to wall or floor all as specified and directed. |
| 28 | Dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches all as specified and directed by Engineer-in-Charge. |
| 29 | Cleaning and removing all scale and dirt etc from tanks and from mouyths of circulating pipes etc of water storage tanks exc 500 ltr but not exc 1000 ltrs including writing lettersof 10cm height and 2cm widewithsynthetic enamel paint for date of cleaning complete all as specified and directed by Engineer-in-Charge. |
| 30 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender.The Schedule of Credit is pre-priced by MES.The final amount of the tender shall be arrived at after deducting the total amount of Rs. 18,480.00 Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. |
