|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed. |
| 2 | M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified. |
| 3 | Taking down chowkats or frame with shutter (without taking off shutters from the frames) n exc 1.5 Sqm complete all as specified and as directed. |
| 4 | Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.5 Sqm and n exc 4.00 sqm each of any description incl making good the disturbed surfaces complete all as spd and as directed. |
| 5 | Taking down shutters of any description exc 1 sqm & n exc 2 sqm each and refixing in Same opening after doing suitable repairing hinges etc or as directed by Engr-In-charge |
| 6 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 7 | M&L for light coloured Vitrified Ceramic tiles9-10 mm thick area of each tiles not less than 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6. |
| 8 | All as per item No. 7.00 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces. |
| 9 | M&L for joint freenon skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 |
| 10 | M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointedin neat cement slurry & pointed in white or coloured cement to match over and including 15mm rendering in 1:4 cement mortar complete all as specified & as directed |
| 11 | S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified. |
| 12 | S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm includingflush pipe , PVC P-trap and PCC for fixing complete all as specified and as directed. |
| 13 | S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified. |
| 14 | S&F in repairs PVC valveless, syphonicaction type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets. |
| 15 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm. |
| 16 | S & F in repairs brass waste coupling of 32 mm dia for WHB all as specified and as directed |
| 17 | S & F PVC waste pipe 32mm bore of suitable length for WHB/Urinsl/sink complete all as specified and as directed |
| 18 | S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified. |
| 19 | S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified |
| 20 | S&F in repair CP grating 100 mm dia all as specified and as directed. |
| 21 | S&F Single mirror bath room cabinet moulded body and frame (made of strong and fine quality A.B.S plastic) with hinged door (size 16\"x12\"6\") white/ivory in colour. |
| 22 | S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long |
| 23 | Taking up or down 15 mm dia steel tubing and connectionand removal from site complete all as specified and as directed |
| 24 | Taking up or down 20 mm dia steel tubing and connectionand removal from site complete all as specified and as directed |
| 25 | S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed. |
| 26 | S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed. |
| 27 | S&F in repair stop/gate valves/angle valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore. |
| 28 | S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule. |
| 29 | S&F in repair 15mm Pillar taps cast copper alloy, capstan heads CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule. |
| 30 | S&F in repair Brass chromium plated shower rose 125mm size with arm |
| 31 | Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capcity and removing from site complete as directed by Engr -in-charge. |
| 32 | S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair. |
| 33 | Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge. |
| 34 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair. |
| 35 | Disconnecting existing water tanks exc 500ltrs but n exc 1000 ltrs cap setting aside (or lowering if required) for repair cleaning etc and hoisting if required reconnecting and refixing in position. (cleaning repairing etc measured separartely) complete all as spd. |
| 36 | Disconnecting existing water tanks exc 250ltrs but n exc 500 ltrs cap setting aside (or lowering if required) for repair cleaning etc and hoisting if required reconnecting and refixing in position. (cleaning repairing etc measured separartely) complete all as spd. |
| 37 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia and complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F in repair 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls and complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F in repair 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with laid in trenches or in floors |
| 40 | S&F in repair PVC (SWR) door bends 75mm dia with access door and complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 75mm with acess door and complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F in repair PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement and complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F in repair PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors |
| 44 | S&F in repair PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls and complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F in repair PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal and complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F in repair PVC (SWR) door bends 110 mm dia with acess door and complete all as specified and directed by Engr-in-Charge. |
| 47 | Resecuring or easing & adjusting without taking down shutters of any descriptionexc. 1 sqm butn. exc. 2 sqm each and complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F steel windows with side hung shutters including projecting type hinges sith steel handle and steel peg stay , complete with glazing bars, dovetailed or welded. (Note : One AC vent of size 0.70 mtr x 0.50 mtr with top hung shutter will be provided) |
| 49 | All as per item No 48.00 above but without glazing bars complete all as specified and directed. |
| 50 | S&F framed work such as grills gratings etc with ends of bars shoulders and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar works conforming to Fe 290 gde E-165. |
| 51 | S&Fgalvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staplescomplete all as specified and directed by Engr-in-Charge. |
| 52 | M&L for preparation of new steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paintand complete. |
| 53 | S&F in repairs stainless steel curatin rod ,having outer dia 25 mmincluding stainless steel fixing brackets all as directed by Engineer-in-Charge. |
| 54 | S&F in repairs Stainless Steel cap for curtain rod for 25mm dia curtain rod as directed by Engineer-in-Charge. |
| 55 | S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples |
| 56 | Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge |
| 57 | S&F in repairs floor door stopper, with 150 mm long, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor. |
| 58 | S&F in solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge. |
| 59 | M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones. |
| 60 | S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beadingin square n.exc. 0.5 sqm in each paneand complete all as specified. |
| 61 | S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified. |
| 62 | M&L for powder coated anodised aluminium frame for door window & ventilator with one or more rebates including joining cleat for fixing etc comlete all as specified. |
| 63 | S&F powder coated louvers with including arrangement of fixing glass pinhead as per size & louvers ventilator (Glass shall be measurement separately) complete all as specified and as diredcted. |
| 64 | Complete removal of existing treatment surface of walls and applying two coats of wheather proof exterior emulsion paintcomplete all as specified and all as directed |
| 65 | M&L for preparation of old plastered orunplastered surfaces of walls and applyingone coat of white wash. |
| 66 | M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash. |
| 67 | M&L for preparation of old surfaces (plastered or unplastered) of walls including removing/scrapping down existing surface where ever necessary and applying two coat of oil emulsion distemper over two coat of wall care putty complete all as specified & directed. |
| 68 | S&F in repairs for center hole basin mixer without popup waste systemand complete all as directed by Engr-in-charge |
| 69 | S&F in repairs for sink mixer with regular spout w/mand complete all as directed by Engr-in-charge |
| 70 | S&F in repairs for wall mixer with bend,and complete all as directed by Engr-in-charge |
| 71 | S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printedPVC sheet reinforced with mS square tube etccomplete all specified. |
| 72 | S&F Factory made solid panel PVCdoor shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified & directed. |
| 73 | Supply and fixing stainless steel butt hinges medium weight , clod rolled, 100mm, ISI marked, complete all as specified & directed. |
| 74 | Material & Labour aluminium anodised barrel tower bolts extruded section of size 200 mm complete all as specified & directed. |
| 75 | Supply and fixing aluminium anodised fabricated type extruded handles of size 150 mm complete all as specified & directed. |
| 76 | M&L for granite (of any type) tiles 20 mm thick machine cut in skirting/dado over and including 15mm thick rendering in CM 1:6 on stone masonry surfaces, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingcomplete all as specified and directed by Engr-in-Charge. |
| 77 | S&Fcontinuous (piano) hinges, mild steel, bright finish or electro galvanizedwidth of flaps (when open) 30 mm complete all as specified and directed by Engr-in-Charge. |
| 78 | S&Fball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed as directed by Engineer-in-Charge |
| 79 | S&F40 mm dia cupboard knobs of fixed with nut, screw and washer of mild steel, bright finishedcomplete all as specified and directed by Engr-in-Charge. |
| 80 | S& Ffor 18/19 mm thick prelaminated article board, interior grade, pelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and complete as directed by Engr-In-charge |
| 81 | M&L for second class hard wood plain fillets, of sectional area n. exc. 3 sqcm, rectangular or triangular in section, clean sawn, bull nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads and complete as directed by Engr-In-charge |
| 82 | S&F in MS peg set with 3 to 5 hooks fixed to doors/wall with screwscomplete all as specified and directed by Engr-in-Charge. |
| 83 | M&L for water proofing treatment of sunken floor of WCs bathroom etc by applying of the following specifiaction:-(i) Cleaning of sunken floor surface with mechanical means i.e wire brush/air blower etc and remove all loose/unsound material dirt dust etc. (ii)Applying cement slurry mixed with acrylic based polymer modified cementious composite compund coating Hydroproof Xtra of FOSROC /Equivalent of Dr Fixit of Pidilite industries Ltd in the ratio 1:2:4 (one part of acrylic polymer : two part of water and four partof cement) (iiii) First layer of cement slurry @0.444 kg /sqm mixed with acrylic based modified cementious composite compund @0.222 litre/sqm and allow it to air dry for 4 hour.(iv) Second layerof cement slurry @0.222 kg /sqm mixed with acrylic based dified cementious composite compound @0.111 litre/sqm and allow it to air dry for 4 hour followed with water curing for 48 hours (v) 200 micron thick polytgen film shall be pasted with help of adhesive over treatment . Note:- Joints of WC/Trap/Soil waste shall be prperly sealed with sealing compund . Testing of all traps and joints and sunken slab shall be done as per IS-1742 before filling and tiling work as directed by Engineer-in-Charge. |
| 84 | M&L for plain cement conrete 1:5:10 type E-2 (using 20 mm graded broken bricks aggregate ) as in foundation and mass concrete complet all as specified and as directed by Engineer-in-Charge |
| 85 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors as directed by Engineer-in-Charge. |
| 86 | M&L for preparation of old painted wooden surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paintand complete. |
| 87 | M&L for preparation of old painted steel surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paintand complete. |
| 88 | M&L for Complete removal of old existing surfaces and two layer of wall care putty for smooth surface of wall complete all as specified & directed. |
| 89 | S&F in repair corner shelf (set of three) of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) and all as specified and as directed. |
| 90 | S&F in repairs PVC flush bend pipe for PVC 10 litre flushing cistern for EWC/IWC all as directed by Engineer-in-Charge. |
| 91 | S&F in repairs lid for polyethylele water storage tank exc. 500 litres and n. Exc 1000 litres including fixing PTMT nut/binding wirecomplete all as specified and directed |
| 92 | S&F in repairs brass chromium plated health faucet of 15 mmbore complete. |
| 93 | S&F in repairs 15 mm bore brass chromium plated two way bib cock two in one with angle cock including fixing to steel pipe or union. |
| 94 | S&F 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions as directed by Engineer-in-Charge. |
| 95 | S&F in repairs pressure jet for EWC heavy duty complete all as specified and as directed. |
| 96 | S&F in repairs stainless steel toilet paper holder (CP) fixed to walls with chromium plated brass screws complete all as specified and as directed. |
| 97 | S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ,Seat and cover for pedestal pan and complete as directed by Engr-In-charge |
| 98 | S&F 110 mm dia PVC WC connector with lip ringcomplete all as specified and directed by Engr-in-Charge. |
| 99 | Taking down shutters only of any description exc 1 sqm & n exc 2 sqm each and complete as directed by Engr-In-charge |
| 100 | Resecuring or easing & adjusting without taking down shutters of any descriptionexc 2 sqm eachcomplete all as specified and directed by Engr-in-Charge. |
| 101 | Pressed steel frames of size 125x60mm thickness 1.25mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified. |
| 102 | Pressed steel frames of size 105x60mm thickness 1.25mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified. |
| 103 | M&L for plain cement concrete type B-1 (1:2:4) using 20mm graded cruhed stone agg as in seismic and other similar bands shelves coping bed plates hold fasts plinth courses filling in pressed steel frame and the like finished fair and even incl necessary from work complete all as specified & directed. |
| 104 | S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treatedcomplete all as specified and directed by Engr-in-Charge. |
| 105 | M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of doors shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkatsnote: Glazed or clothetc in panelsor sash square shall be measured seperatelycomplete all as specified and directed by Engr-in-Charge. |
| 106 | S/F Flush shutters, 30 mm thick paticleboardcore construction, with block board core and plywood face panels, commercial type on both sides and complete as directed by Engr-In-charge |
| 107 | M&L for preparation of wooden surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primerandcomplete all as specified and directed by Engr-in-Charge. |
| 108 | S&F200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloycomplete all as specified and directed by Engr-in-Charge. |
| 109 | S&Fextructed aluminium alloy handles, fabricated type,anodised of size 150mmcomplete all as specified and directed by Engr-in-Charge. |
| 110 | S&FAluminium anodised barrel tower bolt of extruded section 150mm sizecomplete all as specified and directed by Engr-in-Charge. |
| 111 | S&F Butt hinges,mediumweight cold rolled mild steel ofsize 100mmcomplete all as specified and directed by Engr-in-Charge. |
| 112 | S&F in repairs extructed aluminium alloy handles, fabricated type,anodised of size 150mmcomplete all as specified and directed by Engr-in-Charge. |
| 113 | S&F in repairs Aluminium anodised barrel tower bolt of extruded section 150mm sizecomplete all as specified and directed by Engr-in-Charge. |
| 114 | S&F in repairs Butt hinges,medium weight cold rolled mild steel ofsize 100mmcomplete all as specified and directed by Engr-in-Charge. |
| 115 | S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge. |
| 116 | S&F in repairs 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloycomplete all as specified and directed by Engr-in-Charge. |
| 117 | S&F in repairs box type hinges of steel window/ventilator, including necessary fixing & welding work etc complete all as directed by Engr-in-charge. |
| 118 | S&F in repairs left/right MS handle of steel windows including welding(if required) & fixing complete all as directed by Engr-in-charge. |
| 119 | S&F in repair MS 300 mm , ordinary rat tail rod pattern springs including rooler and roller plate complete all as specified. |
| 120 | S&Ffigured glass 4mm thick, pin head type and glazing with oil putty in square n. Exc 0.5 Sqm in each pane complete all as specified & as diretced |
| 121 | S&F in repairs aluminium (Die cast) body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed. |
| 122 | S&F plain white 18mm thick PVC sheet/board of required size in cupboards and in similar works includingbrackets/bolts for fixing. The panels shall be fabricated using adhesive and screws where required .All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed. |
| 123 | S&F cupboard shutters of required sizes at site made out of 18 mm thick one siode decorative teak face finish consisting of 18mm thick PVC sheet/board including all necessary fittings and fixtures like handles, hinges, locking devices, magnetic catches etc. All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified |
| 124 | S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled sectionas in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc and complete as directed by Engr-In-charge |
| 125 | M&L 6/12mm plywood grade BWP type BBfixed with screw timber frame work and complete as directed by Engr-In-charge |
| 126 | M&L for poviding and injecting chemical emulsion for post construction anti termite treatment along external wall where the apron is not proving using chemical emulsion at theart of 7.5 ltr per sqm of the vertical surface of the sub structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed. |
| 127 | M&L for treatment of soil under existing floors using emulsion @ one litres per hole 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors and all as specified and directed. |
