|
| 1 | Dismantiling of wall and ceiling boards (fibre pulp, insulaltion etc) or insulation boards / slabs / blankets, any thickness including cover fillets, complete all as specified and directed by Engr-in-charge. |
| 2 | Dismantling wrough iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge. |
| 3 | S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates riveting etc n exc 10 kg each brackets conforming to Fe 290 Gde E-165, complete all as specified and directed by Engr-in-charge. |
| 4 | S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and directed by Engr-in-charge. |
| 5 | S&F PUF panel board 40mm thick covered both sides with PPGI sheet 1 mm thick and fixed with screws to angle iron grid at a roof level 9 to 10 mtr from floor, complete all as specified and directed by Engr-in-charge. |
| 6 | M&L for preparation new steel surfaces and two coats of synthetic enamel paint, over a coat of redoxide primer, complete all as specified and directed by Engr-in-charge. |
| 7 | Taking down existing unserviceable /old copper / alluminium sub main wiring any size, complete all as specified and directed by Engr-in-charge. |
| 8 | Taking down existing unserviceable /old hanging light / flood light from any height and any make etc, complete all as specified and directed by Engr-in-charge.. |
| 9 | Supply & Fixing of Endura highbrite energy saving, environment friendly & robust open type vertical highbay/midiumbay LED luminaire with high power COB LED as light source 120 watt LED cat part No SAUCERGENXPROHBP120WLED757P90DBPLTG of make : Havells or equivalent in price and quality of Cromption / Phillips. |
| 10 | Supply & Fixing of JETA LINEAR exclusive innovative designed, long life versatile pressure die-cast aluminium IP65 flood light 150w luminaire with high power LED as light source with complete mounting assoceries. Make Havells cat part No JETAIRISFLS150WLED757PSYMLTG of Make : Havells or equivalent in price and quality of Cromption / Phillips |
| 11 | M&L for sub main wiring with two RUNS of single core 2x2.5Sqmm for main and neutral wire and one run of single core 2.5 Sqmm as earth wire of multi stranded copper conductor FRLS insulated unsheathed cables conforming to IS : 694 drawn through and including on wall and MS channel surface rigid medium duty unplasticised PVC conduit conforming to IS : 9537 (Part-3) and ISI marked not less than 20 mm dia on wall and MS channel surface with necessary clamps and all accessories all conforming to IS specification complete all as specified and directed by Engr-in-charge.Note :- Two run of 2.5 Sqmm and one run of 2.5 Sqmm wire / cable and PVC conduit pipe shall be measured and paid as one run unit. |
| 12 | M&L for sub main wiring with two RUNS of single core 2 x 6 Sqmm for main and neutral wire and one run of single core 6 Sqmm as earth wire of multi stranded copper conductor FRLS insulated unsheathed cables conforming to IS : 694 drawn through and including on wall and MS channel surface rigid medium duty unplasticised PVC conduit conforming to IS : 9537 (Part-3) and ISI marked not less than 20 mm dia on wall and MS channel surface with necessary clamps and all accessories all conforming to IS specification complete all as specified and directed by Engr-in-charge.Note :- Two run of 6 Sqmm and one run of 6 Sqmm wire / cable and PVC conduit pipe shall be measured and paid as one run unit. |
| 13 | M&L for sub main wiring with Four RUNS of single core 4 x 16 Sqmm for main and neutral wire and one run of single core 10 Sqmm as earth wire of multi stranded copper conductor FRLS insulated unsheathed cables conforming to IS : 694 drawn through and including on wall and MS channel surface rigid medium duty unplasticised PVC conduit conforming to IS : 9537 (Part-3) and ISI marked not less than 20 mm dia on wall and MS channel surface with necessary clamps and all accessories all conforming to IS specification complete all as specified and directed by Engr-in-charge.Note :- Four run of 16 Sqmm and Two run of 10 Sqmm wire / cable and PVC conduit pipe shall be measured and paid as one run unit. |
| 14 | Supply & replacment load line TPN vertical DB;s double door provision for TPN MCCB frame up to 160 Amp in 25 KA, as incomer 4 way all as specified and directed by Engr-in-charge. Cat part No DHDLVDRWGOFOO4 of make : Havells or equivalent in price and quality of Legrand / L&T |
| 15 | Supply & replacment in DB\"s MCCB 160 Amp 4 Pole 25 KA cat part No IHLGHTO160 of Make : Havells or equivalent in price and quality of Legrand / L&T. |
| 16 | S&F ceiling rose, surface bakelite three terminals including taking down old one, complete all as specified and directed by Engr-in-charge. |
| 17 | Supply and replacement of ON load change over switch 415 Volt in sheet metal inclosure 4 Pole of capacity 250 Amps with connecting acessories complete all as specified and directed by Engr-in-charge.. Make : Havells cat No IHCNFE0250 L&T / Indo Asian. |
| 18 | S&F sheet metal enclosures (MCB distribution board) when MCB\"s to be used single pole and neutral 8 ways 240 volt with 200 amps rated bus bar, single door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching complete all as specified and directed by Engr-in-charge.. |
| 19 | S&F sheet metal enclosures (MCB distribution board) when MCB\"s to be used single pole and neutral 2 ways 240 volt with 200 amps rated bus bar, single door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching complete all as specified and directed by Engr-in-charge.. |
| 20 | M&L Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint, complete all as specified and directed by Engr-in-charge. |
| 21 | S&F single pole & neutral (SPN) MCB 40 Amps, 240 Volts, 50 Hz AC made from moulded self-existing thermostat plastic and suitable \"C\" curve 10 KA breaking capacity and terminal box suitable for 4 to 10 Sqmm cable complete conforming to IS 8828 of 1996 incl, taking down old one complete all as specified and directed by Engr-in-charge. |
| 22 | Taking down existing unserviceable/old DBs from any height and any make complete including disconnection from existing MCB\"s /Isoletors etc, complete all as specified and directed by Engr-in-charge. |
| 23 | S&F single pole (SP) MCB 6 to 32 Amps, 240 Volts, 50 Hz AC made from moulded self existing thermostat plastic and suitable \"C\" curve 10 KA breaking capacity and terminal box suitable for 1.5 to 6 Sqmm cable complete Conforming to IS 8828 of 1996 incl, taking down old one complete all as specified and directed by Engr-in-charge.. |
| 24 | M&L for supply, installation, testing and commissioning of GI Earthing complete with galvanized steel earth, plate 600 x 600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised Iron strip 25 x 4 mm dia as earthing lead by means of bolts, nuts, check-nuts and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 32 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel of size 600 x 600 x 6 mm, supplying and laying charcoal stone aggregate) chamber and mild steel angle iron frame 40 x 40 x 3mm and RCC cover 40 mm thick (1:2:4) type B1 using 20 mm grade crushed stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe light grade, complete all as specified and directed by Engr-in-charge. |
