|
| 1 | M&L flush pointing to brick laid flat or brick tiles in roofs and pavingin cement mortar (1:3)including racking out joints/ pointing to brick work or brick tilesin roofs etc. work built in cement mortar complete all as specified and directed. |
| 2 | M&L 15 mm thick screed bed or bedding layer of mortar in CM(1:6) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface and Supply & fixing Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m bitumen and laid on roof, complete all as specified and directed. Note: WPC shall be measured and paid separately |
| 3 | Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 4 | M & L for 80mm thick average consolidated thicknessmud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified and directed. |
| 5 | S & F 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by weightof cement on mud phuska including Dismantling of brick tiles in roofsinglelayer jointed & pointed in cement mortar including removal of grass vegitation including roots complete all as specified and directed. |
| 6 | All as item No 5 above but except tiles complete all as specified and directed. |
| 7 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes for exc 250 and n. exc 500 ltr capacity of water tanks and incl to mension date of cleaning in suitable paint, etc complete all as specified and directed. |
| 8 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes for exc 500 and n. exc 1000 ltr capacity of water tanks and incl to mension date of cleaning in suitable paint, etc complete all as specified and directed. |
| 9 | M&L for Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed. |
| 10 | M&Lfor Preparation of old decorated surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 11 | M&L for Preparation of old decorated surface of wall and applying one coat of cement based paint including corneces, pillars etc complete all as specified and directed. |
| 12 | Applying one coat of Acerlic Exterior Emulsion on walls including preparation of old decorated plaster surfaces on wall as specified and directed by Engr-in-charge. |
| 13 | Complete Removal of existing treatment of walls applying two coats of cement based paint over one coat of chalk whitining on plastered surfaces all as specified and directed. |
| 14 | M&L for Preparation of old decorated surfaces on ceiling and applying one coat of white lime wash including cornice and pillars etc complete all as specified and directed. |
| 15 | M&L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | M&L for Preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 17 | M&LGlazed ceramic coloured tiles in vertical surfaces 300x450x7mm/ 200x300x7mmthickset and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4)on fair faces of brick work or concrete surfaces including dismentling of wall tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified & directed |
| 18 | M&L Non skid ceramic coloured tiles7 to 8 mm thick (square)area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurryand pointed in white or coloured cement to match overincluding 15 mm thickscreed bed in cement mortar (1:6)including dismentling of floor tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 19 | M&L Non skid ceramic coloured tiles7 to 8 mm thick (square)area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurryand pointed in white or coloured cement to match overincluding 15 mm thickscreed bed in cement mortar (1:6) including dismentling of floor tiling withcement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 20 | M&L for Glazed ceramic tiles, coloured (light colour as approved),7 to 8 mm thick (square)area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm, on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tilesincluding dismentling of floor tiling incl cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 21 | S&F Vitrified ceramic tiles 8-10mm thick (Square/rectangular)polished area of each tiles n.exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed |
| 22 | M&L forlight shade Vitrified tile 8-10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 15mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed |
| 23 | Demolition of un-reinforced cement concrete in any position complete all as specified and directed |
| 24 | M&L for 75 mm thickPCC (1:2:4) type B-1 using 20 mm gradedcrushed stone agg.as in floor, hard standing finished complete all as specified and directed |
| 25 | Taking down cement plaster & rendering 15 mm thickin cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint over chalk whitining on walls incl preparation of new surfaces complete all as specified and directed |
| 26 | Taking down cement plaster & rendering 10 mm thickin cement mortar (1:6) on any face of brick walls or concrete surfaces, finishedeben and smooth without using extra cement and applying two coats of white lime wash (white washing) incl preparation of new surfaces on walls complete all as specified and directed |
| 27 | Taking down cement plaster on ceiling surfaces &rendering 5 mm thickin cement mortar (1:3) finished even &smooth without using extra cement and applying two coats of white wash incl preparation of surfaces complete all as specified and directed |
| 28 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) incl demolition of brick work or stone/boulder masonary built in cement mortor complete all as specified and directed |
| 29 | Demolition of brick work built in cement mortar of any specification and in any position and using old bricks in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius retrieved from dismentling including cleaning and removal of mortar from old bricks. complete all as specified and directed. |
| 30 | M&L rendering 15 mm thickin cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint over chak whitining on walls incl preparation of new surfaces complete all as specified and directed |
| 31 | M&L for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) including Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and directed. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) of sizeexceeding 1.5 Sqm but n.exc 4 sqmeach including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified and directed. |
| 33 | S&F for Pressed Steel Frames for doors1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shockabsorber 20mm dia,60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paintccomplete all as specified and directed |
| 34 | S&F for Pressed Steel Frames for doors1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shockabsorber 20mm dia,60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paintcomplete all as specified and directed |
| 35 | M&L for PCC (1:3:6) type C-1 using 20 mm gradedstone agg .as in filling steel frames etc including necessary form work complete all as specified and directed |
| 36 | Material and labour forPCC (1:2:4) type B1 with using 20 mm graded stone agg as inbed blockhold fast block complete all as specified and directed |
| 37 | Taking down shuttersof any description exc 1 sqm and not exc 2 sqm each or otherwise as directed complete all as specified and directed. |
| 38 | S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified and directed. |
| 39 | S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed |
| 40 | S&F 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and directed |
| 41 | S&F 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and directed |
| 42 | S&F for 250 mm Mild Steel sliding door boltsplate type, stove enamelled black, with bright boltnot less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed |
| 43 | S&F300mm, Mild steel ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed |
| 44 | M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 45 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified and directed. |
| 46 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheetrainforced with MS square tube complete all as specified and directed |
| 47 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC \"C\"channel having a PVC sheet strip of20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail;on either side & as gap insert for top rail;panelling of plain colour PVC sheet 5mm to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed |
| 48 | S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed. |
| 49 | S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed. |
| 50 | S&FPTMT door handle, 150 mm long and fixed with steel screws complete all as specified. |
| 51 | S&F factory made box type steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle two shutters withoutglazing bars and two shutters with glazing bars dovetailed or welded and with framed guard bars with one shop coat of zinc chromate primer complete all as specified and directed. |
| 52 | S&F factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed. |
| 53 | S&F 3 mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each complete all as specified and directed. |
| 54 | S&F 3 mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each including hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, complete all as specified and directed. |
| 55 | S&Fstainless steel wire cloth0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 56 | S&F in repairs stainless steel wire cloth0.56mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 57 | M&L for preparation ofnew steel surfaces of any description, over 10 cm width or girthand applyingtwo coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and directed |
| 58 | M&L for preparation ofnew steel surfaces of any description, over 10 cm width or girthand applyingtwo coats of synthetic enamel paint icomplete all as specified and directed |
| 59 | S&F Mild steel curtain rod chromium plated with fixing side brackets, end cups and fixed withPVC rawl plugs & steel screws as inrepairs complete all as specified and directed. |
| 60 | S&F for anodised aluminium frame for doors, windows, ventilators and patations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 61 | S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 62 | S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 63 | S&F in repair Aluminium body hydraulically regulated Door closeruniversal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed. |
| 64 | S & F in repair 14-16 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters& shelvesincluding dismantling of boarding, any description complete all as spd and directed by Engineer in charge. |
| 65 | S&F 20 mm thick 2nd class hardwood boarding planed one side with butt joints fixed in shelves; Partitions, shutters and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work, including dismantling boarding of any description complete all as specified and directed |
| 66 | S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed |
| 67 | S&F Mild steel butt hinge, 100 mm long, medium weight, cold rolledfixed with steel screws or welded to steel frame where required complete all as specified and directed |
| 68 | S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors includingtaking up or down existing steel water tubing complete all as specified and directed |
| 69 | S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including taking up or down existing steel water tubing complete all as specified and directed |
| 70 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaning old steel water tubing in new or old position using new fittings complete all as specified and directed |
| 71 | Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaningin new or old position using new fittings complete all as specified and directed |
| 72 | S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and directed |
| 73 | S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or \"S\" trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed |
| 74 | S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover(excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed |
| 75 | S&F in repair Vitrous china (White) flat back urinal of size 465x355x265mmwith grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, , flush pipe, union for discharge pipe complete all as specified and directed. |
| 76 | S&F in Repair seat cover For WC, any colour pattern with flat bottom and cover mild steel hinging device complete all as specified and directed. |
| 77 | S&F in repairs vitreous china wash basin,white flat back,size (450X300) mm including waste coupling PTMT 32 mm,low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, PVC conection15 mm dia 450 mm long,and bracket complete all as specified and directed |
| 78 | S&F in repair 600x450 mm bevelled edge mirror of selected quality mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brassscrews and cup washers complete all as specified and directed |
| 79 | S&F in repair 15 mm bore Bip tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule. complete all as specified and directed |
| 80 | S&F in repairs15 mm bib tapstandard of PTMT any colour high pressure screwed for iron pipe (Min wt 90 Gms). complete all as specified and directed |
| 81 | S&F in repairs 15 mm stop valve of PTMT any colour high pressure screwed for iron pipe(Min wt. 90 gms). complete all as specified and directed |
| 82 | S&F in repairs 15 mm Stop valve/Angle valve cast copper alloy screwed down, high pressure screwed for iron pipe complete all as specified and directed |
| 83 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMTstop valve screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed. |
| 84 | S&F in repair Rotational moulded Polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm PVC float valve high pressure with polythene float valve & taking down old PVC water tank complete allas specified and as directed. |
| 85 | S&F in repairs 15 mm pillar taps,cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or\"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed |
| 86 | S&F in repairs 15 ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms) complete all as specified and directed. |
| 87 | S&F Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type 655X355X735mm (monolithic flush cistern type) CERA Cat No: S1013207s or equivalent single picece wc with soft slim close seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions and all asspecified and directed. (Make:Cera/Jaguor/Parryware) |
| 88 | S & F in repair to CP WHB mixer (Cera cat No: F2002461 Basin Mixer or equivalent) 15mm bore. With out popup waste system with 450mm long braided hoses Complete all as specified and directed by Engineer in Charge. (Make: Cera/ Jaguor/Parryware) |
| 89 | S&FPVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed |
| 90 | S&F in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWP complete all as specified and directed |
| 91 | S&F in 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWP complete all as specified and directed |
| 92 | S&F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed |
| 93 | S&F 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed |
| 94 | S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed. |
| 95 | Resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 Sqm but n.exc. 2 Sqm each complete all as specified & directed. |
| 96 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 97 | S & F in Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge . |
| 98 | S & F in Gypsum Board 8 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mm X 23mm , Sub tee 23mm X 23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 99 | Demolition of un-reinforced cement concrete and M&L for Cement concrete type D-2, 1:4:8 in foundations, filling and mass-concrete complete all as directed. |
| 100 | M&L for Sand filling under floors or in foundationincluding watering and consolidation complete all as specified & directed. |
| 101 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement & no pigment including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortar complete all as specified and directed. |
| 102 | M&Lfor Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry With grey cement and pigments in floors over 20 mm thick screed bed 1:6 including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortar complete all as specified and directed. |
| 103 | S&F Granite (of any type) work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of Stone slabs and tiles of any descriptionlaid bedded and pointed in any mortar complete all as specified & directed. |
| 104 | M & L Machine cutkota stone slabflooring 18-20mm thick over20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes andjointed with grey cement slurrymixed with pigment to match theshade of the slab including rubbingand polishing complete all as specified and directed. |
| 105 | Demolition of reinforced cement concrete in chajjas, fascia and similar suspended work any position complete all as specified and directed. |
| 106 | M&L Reinforcement cement concrete type B0 1:2:4nominal mix using 20mm graded stone aggregate as in repair of chajja & fascia incl with necessary scafolding complete all as specified & directed. |
| 107 | M&L for form work to chajjas, including edges, complete all as specified and directed by Engr-in-Charge. |
| 108 | S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 109 | Dismantling asbestos cement (corrugated or semi corrugated) sheets and S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screwsin roofing complete all as specified and directed. |
| 110 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 111 | M&LSteel work in tubular trusses, posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-24 complete all as specified and directed. |
| 112 | S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed |
| 113 | S&F 1.00mm thick stainless steel plate racks of size 750X600X250 mm all as specified and directed. |
| 114 | S&F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall , overall size of sink 495mmx420mm, bowl size 410mmx330mmx 160mm as in repair complete all as specified and directed. |
| 115 | S&F in repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed |
| 116 | S&F in repair brass Chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed |
| 117 | S&F in repairsbrass choromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 118 | S&F chromium plated fancy type15mm bore dia hot and cold wallmixer with telephonic showerwith provision forover head with 115mm long bend pipe one upper side connecting legs and wall flanges all as specified and directed. (Make:Cera/ Jaguor/Parryware) |
| 119 | M&L for 4.5mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting including sealed down with an approved adhesive in repairs complete all as specified and directed. |
