|
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, brush shrubs, saplings and trees of girth upto 300 mm, removal of stumps, disposal of unserviceable material and stacking of serviceable material upto 100 metres from road boundary.a) By Manual means ii) In areas of Thorny Jungle |
| 2 | b) By Mechanical means. (for all classes of jungle). |
| 3 | Felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches and removing the roots and stacking of serviceable material and disposal of unserviceable material with all lifts and upto a lead of 100 metres and earth filling in the depression/pit.a) Girth from 30 cm to 60 cm |
| 4 | Earthwork in excavation exclusive of compensation of earth in -ii) Earthwork with combined lead upto 15 metres including breaking of clods.b) Hard Soil( pick work) |
| 5 | Earthwork in excavation over areas (exeeding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.a) Oridinary and Hard Soil |
| 6 | Earthwork in excavation in foundation trenches or drains etc. (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.b) Hard Soil( pick work )(Coefficient for ordinary soil increased 1.5 times) |
| 7 | Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres.b) Hard Soil( pick work ) |
| 8 | d) Soft Rock (Blasting Work) |
| 9 | Providing and laying in position cement concrete of specified grade excludingcost of centering and shuttering - All work upto plinth level:a) 1:3:6(1 cement :3 course sand :6stone aggregate 20mm nominal size) |
| 10 | Providing and laying in position cement concrete of specified grade excludingcost of centering and shuttering - All work upto plinth level:a) 1:4:8(1 cement :4 course sand :8 stone aggregate 40mm nominal size) |
| 11 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 12 | Providing and laying in position reinforced cement concreteexcluding cost of centering and shuttering , finishing and reinforcement in - b) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate20mm nominal size) |
| 13 | Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately)a) All works upto Foundation &plinth level. |
| 14 | b) All work from plinth level upto floor V level. |
| 15 | Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete.(b) Thermo-Mechanically Treated bars of grade Fe-500 or more. |
| 16 | Centering and shuttering including strutting, propping, etc.and removal of form works for -a)Foundations, footings, bases of columns etc. for mass concrete. |
| 17 | b) Walls including attached pillasters, buttresses, string courses, etc. |
| 18 | c) Columns, pillars, piers, abutments, posts and struts. |
| 19 | d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc. |
| 20 | e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj,etc. |
| 21 | f) Staircases (except spiral staircase) excluding landings. |
| 22 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 23 | Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification. a) Gravelly materials |
| 24 | Diluting and injecting chemical emulsion for post constructional anti termite treatment with Chlorpyriphos/Lindane emulsifiable chemical 20% with 1% concentration.Along external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and pluggingholes etc complete |
| 25 | Providing and laying damp-proof course 25mm thick with cement concrete 1:2:4 (1cement : 2course sand : 4stone aggregate 12.5mm size) |
| 26 | Half brick masonry with first class brickin foundation andplinth.a) in cement mortar1:3(1 cement : 3 fine sand) |
| 27 | b) in cement mortar1:4(1 cement : 4 fine sand) |
| 28 | Half brick masonry with first class brickin superstructure above plinth level upto floor V level.b) in cement mortar1:4(1 cement : 4 fine sand) |
| 29 | Honey-comb half brick masonry withfirst class brickin foundation upto one storey above and below ground level including curing, etc. complete.a) in cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) |
| 30 | Regular coursed rubble masonry with hard stone in foundation upto one storey above and below ground level including curing, etc. complete.b) in Cement mortar 1:4(1 cement :4 fine sand ) |
| 31 | Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position. |
| 32 | Providing 40 x 5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia. bolts, nuts and wooden plugs and embeddings in cement concrete block 30 x 10 x 15cm 1:3:6 mix (1 cement : 3 sand : 6 well graded stone aggregate 20 mm nominal size) |
| 33 | Providing and fixing readymade door (Masonite or equivalent quality) including M.S. butt hinges with necessary screws complete.b) 35mm Readymade Teak Veneer Door |
| 34 | Providing and fixing CP brass sliding door bolts (aldrops) bright finished with nuts and screws etc. complete.a) 300 x 16 mm |
| 35 | Providing and fixing CP Brass Tower Bolts (Socket Bolts) bright finished with necessary screws etc. complete.a) 250mm |
| 36 | Providing and fixing CP brass handles with necessary screws, etc. complete a) 250mm |
| 37 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (Glazing to be paid for separately)a) Natural colour |
| 38 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.a) With glass panes of 4.0 mm thickness. |
| 39 | Providing and fixing Curtain Rod with necessary screws & fittings, etc. complete.a) Bright finished |
| 40 | Trenching in ordinary soil upto a depth of 60cm including removal and stacking of serviceable materials and then disposing off by spreading and neatly leveling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludgeand/or manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 41 | 12mm cement plaster 1 :4(1 cement : 4fine sand). |
| 42 | 15mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 43 | 12mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 44 | 20mm cement plaster 1 : 3 (1 cement :3 fine sand).finished with a floating coat of neat cement |
| 45 | 12mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement. |
| 46 | 12mm cement plaster 1 : 4 (1 cement : 4 fine sand) finished with a floating coat of neat cement. |
| 47 | Applying double coated PIDIFIN-2K on the surface of cement concrete for prevention of water infiltration and dampness in water tanks, basement, terraces, etc. ) @1.85kg per sqm. |
| 48 | Providing and fixing on RCC walls GI pipe for overflow/ interflow pipes 65mm dia. |
| 49 | Providing and placing in position electric water pump of approved manufacture including connections to G.I pipes etc. complete with accessories.b) 750 watts |
| 50 | 6mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine sand) |
| 51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 52 | rovidingSwimming pool tiles of approves quality, size, shape and thickness not less than 8mm of approved brand of any shade on wall & floorsof swimming pool laid on bed of 20mm thick cement mortar 1 : 3 jointed with neat cement slurry including finishing joints with grouting in white cement mixed with pigment of matching shade complete.or/ including cutting where necessary finishing with flush pointing with Fix-A-tile (Choksey/ Sika/ Pedelite/ Rout)/ Bal Endura with Bal endura grout complete.a) Fixed with white cement Floor |
| 53 | Providing and laying Precast interlocking Paver tiles (CDI pattern) of approved make locally available at Aizawl over a sand cushion and 100mm thick PCC bed of 1:2:4 including supplying, placing and cleaning, etc., complete (Cost of dressing of soil and PCC to be paid seperately). |
| 54 | Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, laid on bed of 20mm thick cement mortar 1 : 4 (1cement:4course sand),including the joints withwhite cement and matching pigments etc.complete.as per design collours.c ) Double charge |
| 55 | Providing andceramic glazedfloor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thickcement mortar 1 : 4 (1cement : 4 course sand )including pointing the joints with white cement and matching pigments etc. complete. as per designed colour.B) Matt/Antiscratch (As specified Vitrified tile ofSize 600x600mm) |
| 56 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.a) Raj Nagar Plain white marble / green white marble / plain white marble. |
| 57 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to e specified by the manufacaturer),of approved make, in all colours, shades wxcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cemunt mortar 1:3 (1cemeny :3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 58 | Steelwork welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. b) In a grating, frames, guard bar, ladders, railings, brackets, gates & similar works. |
| 59 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 60 | Providing Trapezoidal Polyester Coated Galvanised Steel Sheets Roofing of any colourof 1.06m width at all levels including fitting and fixing ridging with self drilling , self tapping screws, EPDM washers etc. complete excluding the cost of purlin, rafter and trusses.i) For0.40 mmthick : |
| 61 | Providing and fixing G.I steel frame works for ceiling lining consisting of battens 50x25mm fixed over plugs embedded in wall with necessary screws, etc. complete. |
| 62 | Supplying, fitting and fixing PVC board ceiling with nescessary screws etc. complete excluding frame work of base and beading. |
| 63 | Applying priming coat with ready mixed primer of approved brand and manufacture on plaster surface.a) Ready mix white primer. |
| 64 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard & soft wood) & plywood.a) Ready mix white primer. |
| 65 | Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats).b)High Gloss |
| 66 | Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New work (two or more coats) |
| 67 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications.a) On Steel works |
| 68 | Wall painting with water and weather proof paint (Latex Emulsion base ) on cement works of approved brand and manufacture (ISI/ISO certified) of required shade on new work (two or more coats) to give an even shade .Regular interior emulsion like Rangoli deluxeemulsion etc. |
| 69 | Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade.a) Regular interior emulsion like Rangoli deluxeemulsion etc. |
| 70 | Finishing walls withexterior emulsion of required shade on new work (three or more coats) to give an even shade.a) Regular exterior emulsion like supercote, walmasta etc. |
| 71 | Providing and fixing on terrrace (at all floor levels) polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making necessary connections for inlet, outlet and overflow pipes but without the cost for base support. (a)sintex or equivalent |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on walla)15mm dia. nominal bore |
| 73 | b)20mm dia. nominal bore |
| 74 | c)25mm dia. nominal bore |
| 75 | d)32mm dia. nominal bore |
| 76 | f)50mm dia nominal bore |
| 77 | Extra for concealed in brick and RCC works by making chases upto 7.5x7.5cm in walls and making good the same after housing pipes, etc. |
| 78 | Making connection of CPVC pipes distribution branch by providing and fixing equal Tee with jointing, testing complete including cutting and making good etc.a)15mm dia. nominal bore |
| 79 | b)20mm dia. nominal bore |
| 80 | c)25mm dia. nominal bore |
| 81 | d)32mm dia. nominal bore |
| 82 | f)50mm dia nominal bore |
| 83 | Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 90o with jointing, testing complete including cutting and making good etc.a)15mm dia. |
| 84 | b)20mm dia. |
| 85 | c)25mm dia. |
| 86 | d)32mm dia. |
| 87 | f) 50mm dia. |
| 88 | Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 45o with jointing, testing complete including cutting and making good etc.a)15mm dia. |
| 89 | b)20mm dia. |
| 90 | c)25mm dia. |
| 91 | d)32mm dia. |
| 92 | f) 50mm dia. |
| 93 | Making connection of Astral CPVC pipes distribution branch by providing and fixing Male Adaptor (Brass) with jointing, testing complete including cutting and making good etc.(c) 25mm dia |
| 94 | Making connection of Astral CPVC pipes distribution branch by providing and fixing Socket/Coupling with jointing, testing complete including cutting and making good etc.a)15mm dia. |
| 95 | b)20mm dia. |
| 96 | c)25mm dia. |
| 97 | d)32mm dia. |
| 98 | f) 50mm dia. |
| 99 | Making connection of Astral CPVC pipes distribution branch by providing and fixing reducer Coupling with jointing, testing complete including cutting and making good etc.c)25x15mm dia. |
| 100 | d)25x20mm dia. |
| 101 | f)32x25mm dia. |
| 102 | g) 50x32mm dia. |
| 103 | Providing and fixing CPVC Ball valve/ Globe/Stop & Waste valve/ Boiler drain etc. Complete.a)15mm dia. Nominal bore |
| 104 | b)20mm dia. |
| 105 | c)25mm dia. nominal bore |
| 106 | d)32mm dia. nominal bore |
| 107 | f) 50mm dia.Nominal bore |
| 108 | Making connection of Astral CPVC pipes distribution branch by providing and fixing Brass Elbow 90o with jointing, testing complete including cutting and making good etc.b) 20x15mm dia. |
| 109 | Making connection of Astral CPVC pipes distribution branch by providing and fixing Brass FPT Tee with jointing, testing complete including cutting and making good etc. b) 20x20x15mm |
| 110 | Providing and fixing 15 mm nominal bore C.P. brass angle stop cock for basin mixer and geyser points of approved quality conforming to IS:8931.b) Class-II |
| 111 | Providing and fixing chromium plated brass shower rose with 15 or 20mm inlet.a) 100mm dia CP brass shower rose. |
| 112 | Providing and fixing 15mm nominal bore chromium plated brass bib cock of approved quality.b) Class-II |
| 113 | Providing and fixing chromium plated brass long neck pillar cock of approved quality.b) 15mm nominal bore. Element |
| 114 | Providing and placing in position electric water pump of approved manufacture including connections to G.I pipes etc. complete with accessories.b) 750 watts |
| 115 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm uPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(b) Asian pan with integral type foot rests(i) White. |
| 116 | Providing and fixing vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (i) White. |
| 117 | Providing and fixing vitreous china Urinal Flat Back Small 44 x 26.5 x 31.5cm size of Parryware/ Hindware/ Cera and equivalent make with flush valve/spray with C.I or R.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required.(i)White |
| 118 | Providing and fixing vitreous Division Plate 69 x 30 cm size for Urinals.(i)White |
| 119 | Providing and fixing Health faucet with flexible tube upto 1 metre long and holder of quality and make as approved by Engineer - in - charge. |
| 120 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (Hindware or equivalent)b) Single Sink 610x460 mm bowl depth 200mm |
| 121 | Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required. a) Vitreous China Wash basin size 630x450 mm with single 15 mm C.P. brass pillar tapsi) White |
| 122 | Providing and fixing vitreous china tall pedestal of Parryware/ Hindware/ Cera and equivalent make for wash basin completely recessed at the back for the reception of pipes and fittings.i) White |
| 123 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.Below w/basin |
| 124 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 125 | Providing and fixing C.P. brass towel rail with two C.P. brass brackets to wooden cleats with C.P. brass screws.b) 600x20mm size. |
| 126 | Providing and fixing toilet paper holder.a) CP brass toilet paper holder. |
| 127 | ProvidingandfixingonwallfaceSWRPVC soil,wasteandventpipesincludingjointing with rubber lubricant/ cement solvent complete.(a) 110 mm dia. |
| 128 | (b) 75mm dia. |
| 129 | Providing and fixingSWRPVC plainbend of required degree (87.50)including jointing with rubber lubricant/ cement solvent complete.(a) 110 mm dia. |
| 130 | (b) 75mm dia. |
| 131 | Providing and fixingSWRPVC plainbend of requireddegree(45)includingjointingwith rubber lubricant/ cement solvent complete.(a) 110 mm dia. |
| 132 | (b) 75mm dia. |
| 133 | ProvidingandfixingsingleequalSWRPVC plainjunctionof required degree( T-junction).(a) 110x110 x110 mm |
| 134 | (b) 75x75x75mm . |
| 135 | Providing and fixing SWRPVC plain junction of required degree (Y-junction)including jointing with rubber lubricant/cement solvent.(a)110 mmY-junction |
| 136 | (b) 75mmT-junction |
| 137 | Providing and fixing ventilation cowl includingjointingwithrubberlubricant/ cement solvent com(a) 110 mm SWRPVC vent cowl |
| 138 | Providing and fixing soap dish fixedwith C.P. brass screws. |
| 139 | Carriage by Mechanical Transport.b) Earth within a lead of 10Km (Dumping distance to be Selected) |
| 140 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 141 | 1.8m high polysteel goat proof fencing with 2.4m angle iron posts 50 x 50 x 6mm size placed 2.0m apart embedded in cement concrete block 1:3:6 (1 cement : 3 sand : 6 stone aggegate) of size 25 x 25 x 60 cm fixing with nails and wire etc. including earthwork complete. |
| 142 | 1.2m high steel wire fabric fencing with 1.8m angle iron posts 40 x 40 x 6mm size placed at 2.0m apart embedded in cement concrete block 1:3:6 (1 cement : 3 sand : 6 stone aggegate) of size 25 x 25 x 60 cm with necessary fittings including earthwork complete.b) Expanded wire mesh 4\" |
| 143 | 25mm thick dressed local wood planked flooring butt joined fixed with iron screws / nails complete excluding cost of base frame.a) Ist class wood |
| 144 | 32mmdia Steel Wire Cable with its lock(nut & bolt) L.S. |
| 145 | Zip line Cable 32mm dia with its equiptment L.S. |
| 146 | Internal electrification in two Separate lines DC & AC- 7.50% from the Building Cost. L.S. |
| 147 | External Service Connection 5% from the building Cost. L.S. |
| 148 | Provision for Traning Hall Furniture , Sound System,Hostel furnishing & Cottage Furnishing L.S. |
| 149 | Quality Control 1% from the Building Cost. |
| 150 | Solar Street LightingsL.S |
| 151 | Water Harvesting System.(Bore well,Intake) (Water Harvest by Mechanised (Drilling System)) L.S. |
| 152 | Contingencies to Prevent force majeure in case of unforeseenable circumstances in the Implementation of the Project -2% |
| 153 | Consultancy Charge 2.5% |
| 154 | O&M cost to be Implemented by Fisheries Departmentbafter completion of the Project ( Calculated for 4-years maintenance @ 0%-1st Year,1% - 2ndyear, 1.5% - 3rd Year,2.5%- 4th Year. |
