|
| 1 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 4 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand andmanufacturerincluding applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work |
| 6 | Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface |
| 7 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 8 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 9 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer- in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 10 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 11 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mm |
| 12 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consistfollowing operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and otherdeposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 13 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 14 | (0635) Bright finished or black enameled mild steel screws 50 mm |
| 15 | (0637) Bright finished or black enameled mild steel screws 40 mm |
| 16 | (638) Bright finished or black enameled mild steel screws 30 mm |
| 17 | (0642) Oxidised mild steel butt hinges 125x65x2.12 mm |
| 18 | (0660)Oxidised mild steel sliding door bolt 300x16 mm |
| 19 | (0664) Oxidised mild steel tower bolt (barrel type) 250x10 mm |
| 20 | (0668)Oxidised mild steel handles 125 mm |
| 21 | (0682) Oxidised mild steel screws 50 mm |
| 22 | (0683) Oxidised mild steel screws 40 mm |
| 23 | (0687)Anodised Aluminium butt hinges 125x75x4 mm |
| 24 | (0696)Anodised Aluminium sliding door bolt 300x16 mm |
| 25 | (0698)Anodised Aluminium tower bolt (barrel type) 300x10 mm |
| 26 | (0704)Anodised Aluminium handles 100 mm with plate 150x32 mm |
| 27 | (1689)Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore |
| 28 | (2406)Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 29 | (2414)18 mm thick block board with commercial ply veneering on both side |
| 30 | (2449)Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete |
| 31 | (7059)Aluminium hanging floor door stopper with twin rubber & stopper |
| 32 | (7060)Hydraulic door closer tubular type Aluminium section body |
| 33 | (7120)Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings |
| 34 | (7130)Rectangular shape 600x450 mm precast R.C.C. manhole cover withframe - L.D. - 2.5 |
| 35 | (7134)Circular shape 500 mm dia precast R.C.C. manhole cover with frame-M.D.-10 |
| 36 | (7409)PTMT grating 100 mm dia |
| 37 | (7762)Precast R.C.C. perforated slab |
| 38 | (8637)Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia |
| 39 | (8638)Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia |
| 40 | (7411)125 mm grating with waste hole |
| 41 | (7496)PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 42 | (7497)PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 43 | (7403)15 mm dia PTMT stop cock (male thread) |
| 44 | (7407)PTMT push cock 15 mm dia |
| 45 | (7500)PTMT Angle Stop cock with Flange 15 mm |
| 46 | (7358)Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) |
| 47 | (1947)Vitreous china flat back wash basin 630x450 mm |
| 48 | (1954)Vitreous china orrisa type W.C. pan of size 580 mm |
| 49 | (1955)Vitreous china pedestal type water closet |
| 50 | (1313)8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C. |
| 51 | (7400)15 mm PTMT bib cock |
| 52 | (7402)15 mm PTMT bib cock long body with flange |
| 53 | (7409)PTMT grating 100 mm dia |
| 54 | (7864)P.T.M.T. extension nipple 15 mm dia |
| 55 | (7805)Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724 mm X 578 mm |
| 56 | (1885)15 mm C.P. brass tap |
| 57 | (1951)C.P. brass waste 32 mm |
| 58 | (1621)S.C.I. plain bend 100 mm dia |
| 59 | (7507)PTMT Shelf 450x124x36 mm |
| 60 | (7862)15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts |
| 61 | (1649)Polyethylene water storage tank with cover and suitable locking arrangement |
| 62 | (1900)S.W. gully trap P type 100x100 mm |
| 63 | (1364)C.I. grating 100x100 mm |
| 64 | 125 mm grating with waste hole |
| 65 | (1686)S.C.I. collar 100 mm dia |
| 66 | (0639) Bright finished or black enameled mild steel screws 25 mm |
| 67 | (0588) Chromium plated Brass screws 25 mm |
| 68 | (1617)S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 100 mm dia |
| 69 | Modified Estimated Cost after using Correction factor on DSR 2023 on account of GST 0.973:- |
| 70 | Add 3% Cost Index :- |
| 71 | Attending day to day complaints relating to Plumbing work such as repairing/replacment of water supply/sanitary installation, GI & CI pipes, fittings, bib cocks stop cocks, valves, cistern, flushing cistern, piller cocks, water tanks etc. and other misc. works including necessary T & P required to carryout the job through one no. skilled plumber as per the directions of the Engineer-in-Charge complete (Materials if requied shall be issued by the department free of cost). |
| 72 | Attending day to day complaints relating to Sewerage/ Drainage through one no. skilled sewerman such as cleaning of blocks of sewer line/drains, sanitary pipes, cleaning of manholes, EC\"s, gully traps, gully chambers, wash basin, urinals, including all operation and necessary T & P required for carryout the job and disposal of malba to the nearest dumping ground as per the directions of the Engineer-in-Charge complete (All T & P such as bamboos, khapachies, ropes, sewer cleaning rod, golchi, phawrah pichare, kanta etc. shall be arranged by the contractor at his own cost). |
| 73 | Providing the services of Helper for helping the plumber & carpenter for attending day to day complaints under the Sub-Dision area maintain for annual repair repair and maintenance works of the buildings complete (Payment will be made after provucing of attendance sheet from concerned offices.) / Bio-metric attendance. In all working days of month in concerned office as per direction of Engineer-in-charge. |
| 74 | Attending day to day complaints relating to Carpentary work such as repairing of doors, windows, cup boards, replacement of fittings, locks, door closer, grills, wire gauge, renewal of glass panes, mirrors and other misc. works including T & P required to carryout the job through one no. skilled carpenter as per the directions of the Engineer-in-Charge complete (Materials if reqd. shall be issued by the department free of cost). |
