|
| 1 | (B-145/12.43.2) Painting exterior surface ofWall with100%acrylicexteriorpaintofapprovedbrand and manufacture to give an even shade with two or more coatsincludingprepartionofbasewithsandpapering, primer, putty,etc complete in all respect including scaffolding and safety provision :Old work. |
| 2 | Distemperingwithoilboundwashabledistemperof approvedbrandandmanufacturetogiveanevenshade includingallscaffolding:Oldwork(oneormorecoats) including scrapping surface and necessary repairs ,Samecolour(B-12.37.2) |
| 3 | Painting with synthetic enamel paint of approved brandandmanufacture to giveanevenshade:Oneor more coats on old work(B-12.46.2) |
| 4 | Colourwashingofallshadestogiveanevenshade including all scaffolding :Old work (one or more coats ) with whiting with a base coat of white washing includingscrapping old surface.(B-12.35.3) |
| 5 | Repairs to plaster of thickness 12mm to 20mm in patches ofarea2.5sq.metresandunderincludingcuttingthe patch in proper shape, raking out joints and preparing and plasteringthesurfaceofthewallscompleteincluding disposal ofrubbish tothe dumping ground within 50 m leadWithcementmortar1:4(1cement:4coarsesand)(B-13.1) |
| 6 | Renewingglasspanes,withputty and nailswherevernecessary Float glass pans of thickness 4mm(B-13.4.1) |
| 7 | (B-176/16.5.2)Providingandfixingglazingin aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete asperthearchitecturaldrawingsandthedirectionsof engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.): With float glass panes of5.0 mm thickness ( weight not less than 13.50 kg/sqm) |
| 8 | (B-178/16.15)Providingandfixingsuncontrolfilm, thicknessoffilm1MilVisibleLightTransmittance 4- 24%&SolarEnergyTransmittance42-51%&Total solarEnergyrejection37-43%ofapprovedcolourand shade , complete in all respect , at all level , as directed by engineer- in -charge. |
| 9 | (B-176/16.6.1) Providing and fixing double action hydraulicfloorspringofapprovedbrandand manufacture IS:6315marked, fordoorsincluding cost ofcuttingfloorsasrequired,embeddinginfloorsand cover plates with brass pivot and single piece M.S. Withstainless steel cover plate |
| 10 | (B-151/13.12) Repair to stone masonary in cement sandmortar 1:6 with old and new stone. |
| 11 | (B-152/13.23)Repairofexistingsteelglazeddoors, windowsand ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete |
| 12 | (B-152/13.24)Labourchargesforrepairtodoor/ windowwithoutusinganymaterialsuchasapplying randha (finishing) tightening of bolts & screw etc. |
| 13 | (B-153/13.33.b.ii)Repair ofdoor, window shutters includingcostofmaterialandlabourforchangeofdamaged : Panel by Wire Gauge 14 mesh x 24 gauge |
| 14 | (B-153/13.33.c.i) Repair of door, window shutters includingcostofmaterialandlabourforchangeofdamaged : Aldrop of mild Steel12\" long x12mm dia |
| 15 | (B-153/13.33.d.ii)Repair ofdoor, window shutters includingcostofmaterialandlabourforchangeof damaged : Stopper of Aluminium withDRubber Gutka |
| 16 | (B-153/13.33.g) Repair of door, window shuttersincludingcostofmaterialandlabourforchangeof damaged :Mild Steel Tower Bolt 6\" long |
| 17 | (B-153/13.33.i) Repair of door, window shutters includingcostofmaterialandlabourforchangeofdamaged :Steel Handle 6\" size |
| 18 | (B-159/14.23.1)Dismantlingtileworkinfloorsand roofs laid in cement mortar including stacking of serviceable material anddisposalofunserviceable materialwithin50meterlead:Forthicknessoftiles10mm to 25mm. |
| 19 | (B-86/7.12)Providingandfixing1stqualitystandard white, grey, ivory, fume red brown, light green, light blueandotherlight shadesglazed tilesconfirming to IS:13753&IS:15622ofsize200mmx300mmin walls,floors,steps,pillarsetc.laidonabedofneat cementslurryfinishedwithflushpointinginthewhite cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 20 | (B-86/7.13)Providingandfixing1stqualityMAT finished ceremic tile size 300x300mm confirmingto IS: 13755 and IS : 15622 colour such as white, grey, ivory, fumeredbrown,lightgreen,lightblueandotherlight shadesinfloors, steps, pillars etc.laid ona bedof neat cementslurryfinishedwithflushpointinginthewhite cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 21 | (B-88/7.25.1)P&F1stqualityHeavyDutyVitrified DoubleChargedtilesonfloor,skirtingandstepsetc.in differentsizes(thicknessminimum10mm)withwater absortion less than or equal 0.08% and conforming to IS 15622ofapprovedmakeinallcolourandshade,laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. |
| 22 | (B-56/3.8)Providing&fixingprecastcementconcrete coping 1 : 2 : 4 mix 50mm thick complete asperspecification : |
| 23 | (B-103/9.33+9.35)Add or deduct for each wire line over basic item Extrafor usinggalvanizedbarbedwire insteadof blackbarbed wire. |
| 24 | (B-143/12.31.3)Pointingonstonemasonryincementsand mortar1:3(1cement:3sand):Deepgroove pointing |
| 25 | (B-66/5.8.2)HalfbrickmasonryinSuperstructure, aboveplinthleveluptofloorV level usingbricksof designation 75:Cement mortar 1 : 4 (1 cement : 4 coarsesand) |
| 26 | (B-139/12.2.2)Plaster on new surface on walls incementsandmortar1:4includingracking of joints etc. complete fine finish :20mm thick . |
| 27 | (B-150/13.3)Making the opening in masonry including dismantlinginfloororwallsbycuttingmasonryand makinggoodthedamagestowalls,flooringandjambs complete to match existing surface i/c disposal of mulba/ rubbishtothenearestmunicipaldumpingground.For door/windows/clerestory windows |
| 28 | (B-66/5.7.2)Halfbrickmasonryinfoundation&plinth usingbricksofdesignation75:Cementmortar1:4(1cement : 4 coarse sand) |
| 29 | Providing and laying in position cement concrete includingcuring,compactionetc.completeinspecified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1cement:3coarsesand:6gradedstone aggregate 20mm nominal size). |
| 30 | (B-240/2.37.2)ProvidingandfixingChlorinatedPolyvinyl Chloride(CPVC)pipes(IS15778:2007code)having thermalstabilityforhot&coldwatersupplyincludingall CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1metre spacing.Thisincludesjointingofpipes& fittingswithonestepCPVCsolventcementandtestingof joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) : 20mm nominal size |
| 31 | (B-240/2.38.2)ProvidingandfixingChlorinatedPolyvinyl Chloride(CPVC)pipes(IS15778:2007code)having thermalstabilityforhot&coldwatersupplyincludingall CPVC plain & brass threaded fittings i/c fixing the pipe with clampsat1.00mspacing.Thisincludesjointingofpipes& fittingswithonestepCPVCsolventcementandthecostof cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed workincluding cutting chases and making good the walls etc.,) : 20mm nominal size |
| 32 | (B-240/2.39.2)ProvidingandfixingChlorinatedPolyvinyl Chloride(CPVC)pipes(IS15778:2007code)having thermalstabilityforhot&coldwatersupplyincludingall CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction ofEngineerinCharge.(Externalwork).:20mmnominalsize |
| 33 | (B-240/2.39.5)ProvidingandfixingChlorinatedPolyvinyl Chloride(CPVC)pipes(IS15778:2007code)having thermalstabilityforhot&coldwatersupplyincludingall CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction ofEngineerinCharge.(Externalwork).:40mmnominalsize |
| 34 | (B-233/2.15.1) P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. |
| 35 | (B-233/2.15.3) P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25mm nominal bore. |
| 36 | (B-233/2.14.7) P&FFlushCock / FlushValve(IS: 9758 Mark) for WC of approvedqualitymake :CP brass Half-turn exposed 25mm nominal bore. |
| 37 | (B-223/1.43.1)P&FwastePipewithall fitting:P.V.CwithC.Pnut 32 mm |
| 38 | (B-222/1.42.1)P&FwasteCoulpingwithfittingsofapproved quality /make:C.P Brass 32 mm dia |
| 39 | (B-224/1.48.1)P&FGratingofapprovedquality/make::Stainless Steel Sheet size 125mm dia. |
| 40 | (B-233/2.13.3)P & F 15 mm. Dia Connection Pipe of approvedquality/make:PVCpipewith C.P.Brassnutsupto length, 450mm |
| 41 | (B-236/2.26.3+2.27.1)P&FPVCStorageTankISIMarked(IS:12701)indicatingthe BISlicenseNo), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe&25Cm.longwashoutpipewithplug&socket, including making connection etc., complete of approved design:500litrescapacity.AddextraforHoistingChargesfor each floor :For items 2.26.1 to 2.26.4 |
| 42 | (B-232/2.7.3)P&FBibCock(IS:8931Mark),Superiorquality of approved make:C.P. Brass bib cock,15mm nominal bore. |
| 43 | (B-232/2.7.4)P&FBibCock(IS:8931Mark),Superior qualityofapprovedmake:C.P.BrassbibcockLongbody,15mm nominal bore weight not less than 690 gm |
| 44 | (B-231/2.6.1)P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mmdia nominal bore |
| 45 | (B-232/2.8.4)P&FStopCock (IS:8931Mark), superior quality&of approvedmake:C.P.Brass15mmnominal bore. |
| 46 | (B-223/1.47.2)P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type withconcealed screws size 600 mm (Heavy duty). |
| 47 | (B-223/1.47.8)P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Ring revolving type . |
| 48 | (B-225/1.52.1)P & F Soap Dish or Tray of approved quality/make:C.P. brass |
| 49 | (B-232/2.11.2)P&FBallCock(IS:1703Mark)withRod &P.V.C.Ballcomplete::Brasswt.Notlessthan400gm, 20mm. |
| 50 | (B-223/1.45.1)P & F Looking Mirrors with P.V.C. frame of approvedmakeasperdirectionofEngineer-in-charge:Size 500x400mm |
| 51 | (B-117/1.2.2)P & F Indian type white glazed vitreous china 1stqualityW.C.orissapan(IS:2556Mark)with100mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. |
| 52 | P & FEuropeantype white glazedvitreouschina1st qualityW.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor: |
| 53 | (B-219/1.20.2)P & F Low level Flushing Cistern of 10 litres capacity(IS:2556mark)ofapprovedmakewithcomplete fittingsC.I.bracketsdulypainted,brassballcockwithball (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVCbend as per IS : 7231 . |
| 54 | (B-218/1.7.2)P&FwaterclosetSeatCoverswithbrass hingescomplete:SolidPVC(IS2548marked)grade-I White |
| 55 | (B-226/1.59)P&FJetsprayforwaterclosetwithC.P. Copper Tube flange of approved make. |
| 56 | (B-226/1.59)P&FWVCWashbasin(IstqualityIS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934Mark) & 32 mm C.P. brass wastecouplingofapprovedmake,P.V.CWastepipewith PVC nut 32 mm complete including cutting & making goodthe wall :Size 550 mm x 400 mm |
| 57 | (B-225/1.55.2)P & F Bath Shower of approved quality/make:C.P. brass of Heavy & superior quality 150mm. |
| 58 | (B-251/3.21.1)Constructionofchamberinalltypeofsoil with300mm thickmasonryinCM1:6m,10cmthickC.C. 1:5:10infoundation,20mmthickinsiderplasterinCm1:6, finishedwithfloatingneatcement,50mmthickM-15gradeC.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Insidesize300X300mmdepthupto0.5M Cementcover with frame. |
| 59 | (B-254/3.33.5)Supplying & Fixing R.C.C. Manholes coverswith frame of approved make (Light duty).Size 600 X 450mm |
| 60 | (B-233/2.12.1)P & F Inlet Connection (Angle Valves) Superiorquality,ofapprovedmake,forWashbasin,Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 61 | (B-247/3.16.3)P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.)approvedquality /makeincludingjoiningthe pipe with solvent cement rubber ring and lubricant.: 110 mmdia |
| 62 | (B-248/3.17.9.ii)P&F rigid PVC pipe fittings (IS: 4985 mark)ofapprovedquality/makeincludingjoiningthepipe withsolventcementrubberringandlubricant:Bend87.5110mm dia |
| 63 | (B-248/3.17.15.ii)P&FrigidPVCpipefittings(IS:4985 mark)ofapprovedquality/makeincludingjoiningthepipe with solvent cement rubber ring and lubricant:Pipe Clip110mm dia |
| 64 | (B-248/3.17.14.ii)P&FrigidPVCpipefittings(IS:4985 mark)ofapprovedquality/makeincludingjoiningthepipe withsolvent cementrubber ringand lubricant:DoorCap110mm dia |
| 65 | (B-248/3.17.12.iii)P&FrigidPVCpipefittings(IS:4985 mark)ofapprovedquality/makeincludingjoiningthepipe withsolventcementrubberringandlubricant:VentCowel110mm dia |
| 66 | (B-250/3.19.1)Constructionofmanholeinalltypeofsoil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10Cm.thickcementconcrete1:5:10infoundation,20mm thickinsideplasterinCM1:6,finishedwithfloatingneat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M 15gradeC.C.flooring,Cement coverwithframe of450mm dia, earthwork etc. complete as per designincludingdisposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M |
| 67 | (B-248/3.50)Repairingof CementConcreteChambersofdifferent size as per requirement at site and as per direction of Engineer-in-charge. |
| 68 | (B-253/3.28)Emptying of Septic tank ,Soakage well etc. bydisposingorsludgeupto5Km.lead&takingoutsewage including cleaning of site. |
| 69 | (B-230/2.1.9)GALVANISEDIRONPIPESP&FG.I.pipes(InternalWork)withG.I.Fittingsexcludingunion(IS:1239 Mark)&MSclampsincludingcuttingandmakinggoodthe wallsandfloorsConcealedpipeinwallincludingpainting withanticorrosivebitumenpaint:15mmdianominalbore\"B\" Class |
| 70 | (B-230/2.2.1)P&FG.I.Pipes(ExternalWork)withG.I. fittings excluding union (IS : 1239 Mark) including trenching& refilling earth etc.15mm dia nominal bore\"B\" Class |
| 71 | (B-241/2.44.1)Providing and fixing superior quality PVC TankCovercompleteasperapprovedbyEngineerIn Charge300 Lt. capacity |
| 72 | (B-241/2.44.2)Providing and fixing superior quality PVC TankCovercompleteasperapprovedbyEngineerIn Charge500 Lt. capacity |
| 73 | (B-257/3.44.2)ProvidingandFixingUnplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland wastedischargesystem(IS:13592:1992Marked)ofapproved quality /make:110 mm dia |
| 74 | (B-254/3.33.7)Supplying&FixingR.C.C.Manholescovers with frame of approved make (Light duty). |
| 75 | (B-260/3.48)Cleaningofsewerlineofvarioussizesas per requirement at site of different sizes including 100mm,150mm & 225mm dia of Stoneware pipe as perdirection of Engineer-in-Charge. |
| 76 | (E-9/4.1.2)SupplyinganddrawingFRPVCinsulated& unsheathedflexiblecopperconductorasperPWD specificationforelectricalWorkswithISImarked(IS:694) andas perIS8130:2013of 1.1kVgrade. Wire shouldbe made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chancesofoxidization,insulationPVCtypeA/C/D,flame retardantasperIS10810-53,betteramperageratingasper IS:3961part5, inexisting surfaceorrecessedPVC/MS conduit/casing capping making connections with Copper Lugs ofsuitablesize,Ferrules,testingetc.asrequired.2x1.5sq.mm. |
| 77 | (E-9/4.1.6)SupplyinganddrawingFRPVCinsulated& unsheathedflexiblecopperconductorasperPWD specificationforelectricalWorkswithISImarked(IS:694) andas perIS8130:2013of 1.1kVgrade. Wire shouldbe made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chancesofoxidization,insulationPVCtypeA/C/D,flame retardantasperIS10810-53,betteramperageratingasper IS:3961part5, inexisting surfaceorrecessedPVC/MS conduit/casing capping making connections with Copper Lugs ofsuitablesize,Ferrules,testingetc.asrequired.2x2.5sq.mm. |
| 78 | (E-9/4.1.11)SupplyinganddrawingFRPVCinsulated& unsheathedflexiblecopperconductorasperPWD specificationforelectricalWorkswithISImarked(IS:694) andas perIS8130:2013of 1.1kVgrade. Wire shouldbe made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chancesofoxidization,insulationPVCtypeA/C/D,flame retardantasperIS10810-53,betteramperageratingasper IS:3961part5, inexisting surfaceorrecessedPVC/MS conduit/casing capping making connections with Copper Lugs ofsuitablesize,Ferrules,testingetc.asrequired.2x4.0sq.mm. |
| 79 | (E-90/17.9.3)Providing&Fixingof energy efficient /energy saving IP 20 LED direct retrofit Bulb in existingholder or fixture as requiredwith system lumen efficacy ≥100lm/Watt output,pf0.95,CRI>70, minimumlifetimeofminimum 25000BurningHours with , 70%of intialLumen maintaned tilllifeends ,CCT3000°K/4000°K /5700°K/6000°K/6500°K (As per ANSI Bin) , maximum power consumptionshouldnotmorethanthespecifiedratingand Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing onhousing. |
| 80 | (E-87/17.2.2) Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/Glass housing SMDMidPower LED tube rod (with integral driver& alumn. heat sink), on existing fixture.system lumen efficacy ≥ 100 lm/Watt output, internalsurgeprotectionof2.5KV,THD<20%,p.f.≥0.95,CRI>80,lifetimeofminimum 35000Burning Hourswith,70%ofintialLumenmaintanedtilllifeends , CCT3000°K/4000°K /5700°K/6000°K/6500°K(AsperANSIBin),maximum powerconsumptionshouldnotmore than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ NameEngraved/Embossing/Screenprintingon housing. 1200mm, Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing. |
| 81 | (E-81/15.7.3)Providing& Fixingof BEE Starrated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceilingfan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep BEE 3 Star rated (servicevalue >=5.0 to< 5.5 ). |
| 82 | (E-33/7.36)Providing and fixing of power plug point with non modular accessories as per PWD specification for electrical Works withGalvanized box of 1.2 mm thickwith earth terminal with suitable size phenolic laminated sheet (IS : 2036- 1995)coverincludingcostof16amp.Switch(IS:3854) and 3/6 pin 16 amp. socket outletmaking connection , testing , etc. as required. . For specification ofWiring accessories refer ChapterE - 07 related item &For additional technicalparametersofproduct/workreferAnnexure\"A\"attached with this BSR |
| 83 | (E-28/7.10)Providing&Fixingofof3/5pin6amp.flush typenonmodularsocketmadeoutfromindustrialgrade PolycarbonateorfireresistantABSmaterial,brassterminal withPorcelainbasedbackcover&captivescrewsincluding cuttingholeintileandmakingconnectiontestingetc.as required.AllasperpreapprovedbyEngineerincharge.For additional technical parameters of products/ work , referAnnexure \"A\" attached with this BSR . |
| 84 | (E-27/7.1)Providing&FixingISImarked (IS:3854)6amp. flushtypenonmodularswitchwithCM/Lno.printedand made out from industrial grade Polycarbonate or fire resistant ABS material including cutting hole in tile and makingconnection testing etc. as required. |
| 85 | (E-29/7.20)Providing&FixingofIS11037:1984 marked non modular socket size flush type 120 watt rotary minimum5stepfanregulatorwithCM/Lno.printedand made out from industrial grade Polycarbonate or fire resistant ABSmaterialincludingmakingconnectiontestingetc.asrequired. |
| 86 | (E-28/7.9)Providing&Fixingof ISImarkednonmodular 6A hanging bell push/one way switch made out from industrialgradePolycarbonateorfireresistantABSmaterialincluding making connection testing etc. as required. |
| 87 | (E-30/7.26) Providing & Fixing of ding dong/musical chimebell as per PWD specification for electrical Works, including making connection testing etc. as required. |
| 88 | (E-17/6.1.1.2)Providing&Fixingof240/415VACMCB withpositiveisolationof10kAbreakingcapacity(B/C/D trippingcharacteristicaspertypeofloadand site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2,lowwattlosses,tripfreemechanisum,energylimitingof class3asperIEC, minimumphaseterminationcapacityof 35sq.mm.,conductorlineloadreversibility,IP20contact protectionandfittedin existingdistributionboard/sheets, minimumelectricaloperation20,000upto20Aratingand 10,000upto63A,5000for80A&aboverating including makingconnections, testing etc. as required. Single pole MCB(withB/Ccurvetrippingcharacteristics).6Ato32Arating. |
| 89 | (E-18/6.2.1.2)Providing& Fixingof 240/415V isolatorISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilizationcategory, 4KV impulse withstandvoltage, truecontactindication,Redcolourdolly/levershallhave single mould covering over all poles for operation, two position din rail mounting,minimum phase termination capacityof35sq.mm. IP20contactprotectionandfittedin existingdistributionboard/sheet includingmaking connections,testingetc.asrequired.Doublepoleisolator.63A rating. |
| 90 | (E-22/6.10.1.2) Providing & Fixing of recessed/surface mountingheavydutyhorizontaltypedoubledoor (metal/glazed) distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conformingtoIS-8623-1&3/ IEC61439-1&3, powderpaintedcompletewithreversibledoor(fordouble doorDBonly)100amp.insulatedcopperbusbar/shorting link,copperneutrallink,copperearthlink,colorcoded interconnectingwireset ofsuitableratinganddin bar,maskingsheet, makinginternalDB terminationswith copper lugs, Ferrules,detachable gland plate, including makingconnections, testingetc.asrequired.Metaldoor (single phase) IK-09 and IP-43 with Metal end box. 6 Way(6+2). |
| 91 | (E-80/15.1.1) Making of hole in wall (brick/stone) of required and placing NP-2 RCC pipe ring of required size for housing exhaustfanandmakinggoodthesame,withcementplaster required of following size. All as per pre approved by Engineerincharge. Foradditionaltechnicalparametersof products/ work, refer Annexure \"A\" attached with this BSR.Up to 457 mm size |
| 92 | (E-82/15.12.1)Providing&Fixingofheavydutycapacitor start, copper wound double ball bearing900/1400 RPM single phase exhaust fan conforming to IS:2312ISI marked in existing opening including making connections testing etc.as required. 300mm sweep (900/1400 RPM). |
| 93 | (E-83/15.18.1)P&FofGravityLouvershutterofsuperior qualitymade outofframe of 18swgM.S.sheet&Louvers madefrom24swgMSSheet withenamelpaintincluding costofnuts,bolts,etcasreqd. Allasperpreapprovedby Engineerincharge. Foradditionaltechnicalparametersof products/ work, refer Annexure \"A\" attached with this BSR. |
| 94 | (E-88/17.3.2.3) Providing & Fixing of IP-20 LED Recessed/Surface Mounted, Round / SqaureSMD Mid Power LED Downlight with power coated die-cast aluminum housingwith UV Stabilized non yellowish Diffuser withBIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection,having efficiency > 85% . System Lumen efficacy of ≥ 110lm / watt, THD < 10 % , Pf.≥0.95, CRI >80,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/5700°K /6000°K/6500°K (As per ANSI Bin) ,maximum power consumption should not more than the specifiedratingandFixtureshallbeof BISstandardand trade markcertificate( T.C.). Manufactures Word Mark/ NameEngraved/ Embossing/ Screen printing on housing. SurfaceMounting(withextrudedalumn.Housing). Minimum lumen output 1950 lm. |
| 95 | (E-95/18.12.3)Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminummaterial with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & shouldbe SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver& hasa uniqueBISR number withInputVoltage AC120to270V ACwithHighvoltageCutoff@>=300VACandAutoresetting Safety , Power Factor >0.95 driverEfficiency >85%,THD(I) <10% Humidity10%to90%RHWorkingTemp-5Cto45C. driver current<750mA.Theluminaire shallbeBIScertifiedandTrade mark certified. Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K+355K.Surgeprotectionshallbemin ≥4 KV internal andmin 10 KVexternalinsidedrivercompartment.drivershouldbePhaseto phase protection of 440 V for 4 Hrs.Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for alltestingfacilitiesfor LEDfixtures. (LM79/LM80)Certificate/ report with liable warranty of product/accessories from OEM shall be submitted.AllasperpreapprovedbyEngineerincharge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .LED Street Light fixture with Minimum lumen output 5600 lm |
| 96 | (E-95/18.10.4)Providing & Fixing of IK08IP65 protected Top/BottommountedLEDPosttopLuminariemadeofsingle piece constructionpowder coated die cast alluminium housing with UV stabalized Clear / frosted Polycarbonate diffuser andAluminium anodisedwithsandblastreflector.TheSystemlevelLuminous efficacy≥ 100 Lumen/W.SMDLEDsistobeused,System CRI>70,CCT:3000/4000/6500K.Theintegralelectronicdriver must be potted & has a unique BIS R number must be potted & has a uniqueBISRnumberconstantcurrentandInternal/externalsurge protection device of min. 4KV(L-N)and efficiency > 85%, PF>0.9, THD<10%andinputVoltagerangeof140-270VACat50Hz. Systemlifeof50000Burninghourswith70%ofInitialLumens maintained . Driver current <750mA.Fixture must be in compliance withBISStandardsandTrademarkCertificatecompleteinall respect.OEMMusthaveitsowninhouseNABLlabsetupforall testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted.AllasperpreapprovedbyEngineerincharge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .Minimum lumen output 4500 lm Post top Luminarie |
| 97 | (E-56/11.2.2.3)Providing &LayingP.V.C./XLPEinsulated&P.V.C. sheathed ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolytic aluminiumconductorconfirmingtoIS8130ofpurity>99.6%, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) includingtesting etc. as required of following size. OEM must have it\"s own in house NABL accrediatedLaboratoryfortestingprocedureasperIS:10810.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR6.0 sqmm 4 core |
| 98 | (E-95/18.12.4)Providing&FixingofIK08,IP66protectedLED StreetLightLuminaireonexistingbracket/pole.Fixturemadeof powder coated single piece pressure die cast aluminummaterial with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & shouldbe SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver& hasa uniqueBISR number withInputVoltage AC120to270V ACwithHighvoltageCutoff@>=300VACandAutoresetting Safety , Power Factor >0.95 driverEfficiency >85%,THD(I) <10% Humidity10%to90%RHWorkingTemp-5Cto45C. driver current<750mA.Theluminaire shallbeBIScertifiedandTrade mark certified. Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K+355K.Surgeprotectionshallbemin ≥4 KV internal andmin 10 KVexternalinsidedrivercompartment.drivershouldbePhaseto phase protection of 440 V for 4 Hrs.Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for alltestingfacilitiesfor LEDfixtures. (LM79/LM80)Certificate/ report with liable warranty of product/accessories from OEM shall be submitted.AllasperpreapprovedbyEngineerincharge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .LED Street Light fixture with Minimum lumen output 7500 lm |
| 99 | (E-96/18.18.1)Providing&FixingofStreetlightbracketmadeout from following size of \" B \" class , Medium class G.I. Pipe confirming toIS:1239P-1(2004)withheavydutypoleclamp,Saddles suitable fastners etc. as required. All as per pre approved by Engineer incharge. Foradditionaltechnicalparameters ofproducts/work , refer Annexure \"A\" attached with this BSR .20 mm dia |
| 100 | (E-95/16.1.3)Providing&FixingofVertical(BEE5starrated)/ Horizontal( BEE 3 star rated) storage water heater with outer casing made ofEngineeringPlastic sheet (Upto 25 Ltr) / Metal rust proof Body (35 & 50 Ltr), Glass - line / Titanium Enamel coated Pressure PumpCompatible8barpressureInnertank,GlassLineCoated, mineralfilledheatingelement,stemtype,snapaction adjustable thermostat,Dualindicatinglamps InjectedPUFinsulation,Multi FunctionValve etc. as required held in positionwith 2/4 no. 10/12 mmanchorFastener,dulywiredwith3core2.5/4.0SqmmPVC insulated & sheathed copper conductor and 16 A/25A three pin plug topwithPortableResidualCurrentDevice(PRCD),including making inlet, outlet Flexible alloyconnection, testing etc. as required.AllasperpreapprovedbyEngineerincharge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .15 Ltr. |
| 101 | (E-182/26.4)ProvidingandReplacementofballbearingofceiling/ exhaust fan and refixing the same at suitable location as requiredand as per OEM recommendations. Replacement ofmaterial or componentsshallbeuseasperguidelinesofOEMoforiginal product. All the scrap material should be retained by the contractor |
| 102 | (E-3/1.7.1) Rewiring of 3/5 pin 6 amp. Light plug point with1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin materialPVC conduit & it\"s ISI marked (IS:3419-1988) accessories, 1.2 mm thickMS box with earth terminal of required size,6 Aswitch, 3/5 pin 6 A socket, 3.0 mm thick ISI marked (IS:2036-1995) phenolic laminated sheet, Al.alloy / Cadmium plated iron/ brassscrews, cup washers, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSROn Board |
| 103 | (E-3/1.7.2) Rewiring of 3/5 pin 6 amp. Light plug point with1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin materialPVC conduit & it\"s ISI marked (IS:3419-1988) accessories, 1.2 mm thickMS box with earth terminal of required size,6 Aswitch, 3/5 pin 6 A socket, 3.0 mm thick ISI marked (IS:2036-1995) phenolic laminated sheet, Al.alloy / Cadmium plated iron/ brassscrews, cup washers, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSRShort Point |
| 104 | (E-3/1.7.3) Rewiring of 3/5 pin 6 amp. Light plug point with1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin materialPVC conduit & it\"s ISI marked (IS:3419-1988) accessories, 1.2 mm thickMS box with earth terminal of required size,6 Aswitch, 3/5 pin 6 A socket, 3.0 mm thick ISI marked (IS:2036-1995) phenolic laminated sheet, Al.alloy / Cadmium plated iron/ brassscrews, cup washers, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSRMedium Point |
| 105 | (E-3/1.7.4) Rewiring of 3/5 pin 6 amp. Light plug point with1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin materialPVC conduit & it\"s ISI marked (IS:3419-1988) accessories, 1.2 mm thickMS box with earth terminal of required size,6 Aswitch, 3/5 pin 6 A socket, 3.0 mm thick ISI marked (IS:2036-1995) phenolic laminated sheet, Al.alloy / Cadmium plated iron/ brassscrews, cup washers, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSRLong Point |
| 106 | (E-73/14.2)Plate Earthingas per IS:3043 with Hot dippedG.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 20mm dia. G.I. \"B\" class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR. |
| 107 | (E-75/14.6.9)Supply & Laying following size earth wire inhorizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection with GI/Cu purity purity >95%thimble etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .10 SWG G.I. ( Hot Dipped) Wire |
| 108 | (E-28/7.12)Providing & Fixing ofISI marked (IS:371) 6 ampsurface type 3 pin ceiling rose with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws including making connection testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 109 | (E-28/7.13)Providing & Fixing of ISI marked (IS:1258)batten/angle lampholder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR. |
