Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-05-2025 | Due Date Extended for tenders closing on 06-05-2025. | Admin Corrigendum Date Extend | 10-05-2025 |
| 2 | 01-05-2025 | Upgradation of VIP Block of Yatrinivas, Konark | Other | 06-05-2025 |
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in ordinary soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 3 | Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 4 | Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 5 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 6 | R.C.C. work ofM-25 for foundation having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 7 | R.C.C. work ofM-25 for plinth beam having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 8 | R.C.C. work ofM-25 for beam and column having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 9 | R.C.C. work ofM-25 for lintel having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 10 | R.C.C. work ofM-25 for roof slab having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 11 | R.C.C. work ofM-25 for slope roof slab having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 12 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction ofEngineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) |
| 13 | Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 14 | Brick work in superstructure with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 15 | Brick work in superstructure with flyash bricks in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 16 | Providing vitrified tile flooring using double charged vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx1200mm coloured /printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. |
| 17 | Supplying, fitting and fixing of double charged vitrified tiles in skirting of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx1200mm coloured /printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge. |
| 18 | Providing 60cmx60cm sizespecial plain/printed series matt finish vitrified floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tileflooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge. |
| 19 | Providing 30cmx600cm size special plain/printed seriesedge cut ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 20 | Providing 20mm thick and above 0.40 Sqm size granite stone flooring in staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 21 | Supplying, fitting and fixing in position 25mm thick cement concrete tile of approved make, quality, colour and size in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge |
| 22 | Providing and fixing in position well dressed, naturally seasoned sal wood rebated frames of size 125mmx63mm to doors including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge |
| 23 | Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 24 | Providing and fixing in position WPC frames of following approved size to doorsfixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge. 75mm x 50 mm |
| 25 | Providing and fixing in position 28mm thick WPC shutters of approved size to WPC door frames with hinges, handles, tower bolt etc complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge |
| 26 | Supply & Fixing of Glass Door (Double Leaf) of 10mm toughened glass with DORMA ALTERRA System-45 framesall around the door. ALTERRA DP45 Door Profile frame of size 45X50mm with seals with DORMA Junior Office Hinges (3nos) & Studio Gala Locks (1no) in aluminium silver (EV1) finish and DORMA TS 89 Slide Channel Door closer with (as per EN 1154) and saddle plate for fixing on the Glass door and necessary seals to be provided all around the door frames. In case of Glass over panel ALTERRA OHP-DP45 Over Panel Door profile to be used.The ALTERRA profiles shall be suitable for Glass thickness of 10/12/13.52mm.The Profile shall be matt natural anodized or Black finish, wtih all the necessary clips, seals and fixing accessories for the system.All Profiles to be with 2 mm Gauge thickness Excluding 15-20 Micron of Anodizing with +/-10mm Adjustability and sea Shore hardness of 55+/-5degApproved Manufacturer: Profiles/Frames: DORMAKABA, Glass : Saint Gobain/Asahi |
| 27 | Supply & Fixing of Glass Door (Single Leaf) of 10mm toughened glass with DORMA ALTERRA System-45 framesall around the door. ALTERRA DP45 Door Profile frame of size 45X50mm with seals with DORMA Junior Office Hinges (3nos) & Studio Gala Locks (1no) in aluminium silver (EV1) finish and DORMA TS 89 Slide Channel Door closer with (as per EN 1154) and saddle plate for fixing on the Glass door and necessary seals to be provided all around the door frames. In case of Glass over panel ALTERRA OHP-DP45 Over Panel Door profile to be used.The ALTERRA profiles shall be suitable for Glass thickness of 10/12/13.52mm.The Profile shall be matt natural anodized or Black finish, wtih all the necessary clips, seals and fixing accessories for the system.All Profiles to be with 2 mm Gauge thickness Excluding 15-20 Micron of Anodizing with +/-10mm Adjustability and sea Shore hardness of 55+/-5degApproved Manufacturer: Profiles/Frames: DORMAKABA, Glass : Saint Gobain/Asahi |
| 28 | Providing and Fixing white/diamond gray finish system aluminum doors & windows make: Fenesta, Schuco, Reklad, Reynaers, Aluko. Company must have own fabrication facilities & control the entire cycle from fabrication to Installation to post Sales Service. Aluminum profile frame should be powder coated of 65-90 micron, using vertical coating process from a QUALICOAT certified facility and profile must be undergo sublimation process for transferring wood grain patterns on it. Windows & doors profile must be of high grade 6063 T6 and gauge should be vary from 1.2 mm to 4.5 mm as per the design & system requirement. All hardware fitted must be of Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be of make: Saint-Gobain/ Modiguard/ASAHI with 6 mm clear toughened + 12mm gap +6 mm clear toughened or as per approved given specification with weather seal (EPDM/TPE). Window/Door provider should have it’s presence PAN India and having experience of minimum 12 Years of any type of window & doors in India. |
| 29 | Providing and fixing two track two panel sliding window made of frame 45mm x 37.5 mm and sash 28 mm x 68 mm. for doors outer frame will be 92 mm x 38 mm and sash will be 34.5 mm x 75 mm both having wall thickness of 1.2 mm to 1.4 mm as per approved drawing/design. Window/door should have single glazing bead of appropriate dimension for 6mmT +12mm gap +6mm T clear toughened Glass or as per approved given specification. |
| 30 | Fix Ventilator made of frame 45 mm x 50.5 mm and mullion (if required) 48 mm x 61mm both having wall thickness 1.2 mm to 1.4 mm and single glazing bead of appropriate dimension for 4mm pin head louvers glass in case of louver ventilator and arranhement for exhaust fan of 300mm dia. |
| 31 | Supply and Fixing of Slim Glass partition of 10mm Toughened Glass using DORMA ALTERRA System-45 Frames to a height of maximum 3m or as per drawing.The Fixed glass to be fixed using DORMA ALTERRA BP45 Profiles at Top & Bottom & ALTERRA SP45 at sides. The profile size to be 45x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. DORMA ALTERRA H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design.In case of Glass overall panel ALTERRA MP45 & BP45 Overpanel Profile to be used.In case of Open glass edges EP45 End Profile to be used.The ALTERRA profiles shall be suitable for Glass thickness of 10/12/13.52mm.The Profile shall be matt natural anodized or Black finish, wtih all the necessary clips, seals and fixing accessories for the system.All Profiles to be with 2 mm Gauge thickness Excluding 15-20 Micron of Anodizing with +/-10mm Adjustability and sea Shore hardness of 55+/-5degApproved Manufacturer: Profiles/Frames: DORMAKABA, Glass : Saint Gobain/Asahi |
| 32 | Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. |
| 33 | Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/Cand stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect. |
| 34 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 35 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 36 | Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 37 | Providing and fixing POP mouldings in decorative pattern as per drawing, design and direction of Engineer-in-charge. |
| 38 | Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. |
| 39 | Finishing wall surface with Acrylic wall putty to outside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. |
| 40 | Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wallsmooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 41 | Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 42 | Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. |
| 43 | Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. |
| 44 | Providing 20mm. average thick grading plaster with cement mortar of mix (1:4) in all floors at all height with portland slag cement on top of roof slab after chipping and chiseling the same and cleaning the entire surface with wire brush, finished smooth to proper slope and gradient with watering and curing etc. complete including cost, coveyannce, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 45 | Existing RCC surface to be cleaned using chisel, wire brush and make it dust free using an air blower. On dry condition saturate the whole RCC surface and whole parapet wall (Envelope ) with Zycosil Max and clean water 1:45 (in ltr) solution by flooding method with a coverage of 35 sqm per 46 ltr solution. Wet on wet immediately followed by application of one coat of Zycobond Max mixing with water 1:1 using brush with a coverage of 12 sqm per 2 ltr solution. After one day apply one coat of ELASTOSIL mixing with cement 1:1 ( in kg) and 500 ml water in one direction using flat brush.2nd coat of ELASTOSIL to be applied like first coat just 1-2 days before screed concrete. Coverage of 1 ltr Elastosil will be 1.6 sqm in two coats. In screed concrete mortar Zydex Make acrylic cement modifier integral waterproofing compound DENSIFLEX -P to be mixed @ 350 ml per one 50 kg cement bag. |
| 46 | Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished) |
| 47 | Dismantling brick or stone masonry in cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m leadincluding cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant. |
| 48 | Dismantalling and removal of old RCC from beam, column, roof slab,self, chajja etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 49 | Dismantalling and removal of old plain cement concrete from foundation, floor etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 50 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 51 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 52 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 53 | Dismantling grading plaster including stacking the useful materials for reuse and removing the debris within 50m leadincluding cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant. |
| 54 | Dismantalling and removal of old false ceiling, partitions etc including stacking the useful materials for reuse and removing the debris to an unobjectionable area including cost of all material, labour, conveyance, loading and un-loading, taxes, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/ Consultant. |
| 55 | Providing scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge. |
| 56 | Providing and laying laterite stone masonry in cement mortar of mix (1:6) in superstructure with screened and washed sharp sand for mortar of approved quality from approved quarry including providing key stones in regular intervals for each layer including splays cutting, circular moulding and similar such type of works with all necessary projections, champering and corbelling, watering and curing etc. with all cost, conveyance, royalties, loading & unloading & tax of all materials and cost of all labour, sundries, T & P required for the work including hoisting, lowering, dewatering if required etc. complete in all respect as directed by Engineer-in charge. |
| 57 | Providing cement rule Pointing to stone masonry (1:3) including watering & curing etc. with all cost, conveyance, royalties, loading and unloading and taxes of all materials and cost of all labour, T & P, sundries required for the work including hoisting, lowering, dewatering (if necessary) etc. complete in al respect as per specification and direction of the Engineer-in-Charge. |
| 58 | Providing and laying Khandolite stone ornamental/decorativemasonry in cement mortar of mix (1:4) with Portlandslag cement (PSC) and epoxy adhesive in superstructure with screened and washed sharp sand for mortar of approved quality from approved quarry including providing key stones in regular intervals for each layer including splays cutting, circular moulding and similar such type of works with all necessary projections, champering and corbelling, watering and curing etc. with all cost, conveyance, royalties, loading & unloading of all materials and cost of all labour, sundries, T & P required for the work including hoisting, lowering, dewatering if required etc. complete in all respect as directed by Engineer-in charge. |
| 59 | Providing and applying Exterior Colourless silicone water repellent coating of Nitocote SN522 evenly by spraying or brushing. Ensure an even coat over the entire surface. Porous surface should be well saturated with a two coat application Complete as per the manufacturer’s specification.Nitocote SN522 penetrates into concrete for a minimum depth of penetration of 2mm & complies with BS 6477-92 Class A and Class B as silicone - based water repellent. |
| 60 | Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 61 | PH WORKS |
| 62 | Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china wall mounted European water closet with quit close of Kohler make having cat no K-29171IN-0 or equivalent type of approved make with plastic outlet connector K-1527926 including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. |
| 63 | Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china wall mounted Rimless European water closet with quit close of Kohler make having cat no K-26998IN-0 or equivalent type of approved make with plastic outlet connector K-1527926 including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. |
| 64 | Supply all materials, labour,T&P for fitting and fixing of Pneumatic tank 3/6L with full frame andPneumatic faceplate in polished chrome of Kohler make having cat no K-33931-P and K-75890IN-P-CP or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, connecting pipe with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. |
| 65 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware over the counter wash hand basin without faucet hole of size 545mm of Kohler make having cat no K-28783IN-0 or equivalent type of approved make with 350mm bottle trap having cat no K-75823IN-CP with CP waste coupling nut having cat no K-1460429-CP and connection pipe of Jaquar make having cat no ALD 803AB including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. |
| 66 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin without faucet hole of size 413mm of Kohler make having cat no K-2200IN-0 or equivalent type of approved make with 350mm bottle trap having cat no K-75823IN-CP with CP waste coupling nut having cat no K-1460429-CP and connection pipe of Jaquar make having cat no ALD 803AB including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. |
| 67 | Supplying all material, labour T&P and fixtures for providing and fixing of stain less steel sink of size 915x510mm of NIRALI (Elegance Ultra) or equivalent type of approved make with its components like 40mm CP waste of cat no ALD 709, 40mm waste pipe etc, including all requisite fixing materials complete as per the PH specification and direction of Engineer-in-charge |
| 68 | Supplying and fixing urinal with rear spud in white 0.5L of size 381mm x 330mm x 550mm and Urinal sensor of Kohler make having cat no K-20713IN-ER-0 and AC + DC: 24199IN-C03-CP or equivalent type of approved make including all fittings etc complete as per PH specification and direction of the Engineer-in-charge. |
| 69 | Supplying and fixing 12mm thick toughened glazed urinal division plate of approved size with etching and polishing including concrete grouting and edge moulding etc complete as per PH specification and direction of the Engineer-in-charge. |
| 70 | Supplying all materials, labor T&P for fitting and fixing in all floors\" fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. |
| 71 | Supplying all materials, labor T&P for fitting and fixing in all floors\" fixed type glass mirror of size 560mm x 864mm of Kohler make K-26052-BGL including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. |
| 72 | Supplying all materials, labour, T&P and fixing standard sizedTowel rail in polished chrome of Kohler Cat. No.-K-25065IN-CP or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 73 | Supplying all materials, labour, T&P and fixing standard sizedTowel ring in polished chrome of Kohler Cat. No.-K-97498T-CP or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 74 | Supplying all materials, labour, T&P and fixing bib tap in polished chrome of Kohler Cat. No.-K-22543IN-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 75 | Supplying all materials, labour, T&P and fixing concealed stop cock in polished chrome of Kohler Cat. No.-K-16087IN-4-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 76 | Supplying all materials, labour, T&P and fixing standard sizedsquare Angular Valve of Kohler Cat. No.-K-80158IN-9AV-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 77 | Supplying all materials, labour, T&P and fixing standard sizedpillar cock of Kohler Cat. No.-K-22538IN-4-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 78 | Supplying all materials, labour, T&P and fixing standard sizedSingle-control tall basin faucet without drain in polished chrome of Kohler Cat. No.-K-22534IN-4ND-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 79 | Supplying all materials, labour, T&P and fixing standard sizedsink cock of Jaquar Cat. No.-K-37313IN-4-CP or equivalent type of approved make of Hindware / Parryware make complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 80 | Supplying all materials, labour, T&P and fixing standard sizedCP Soap case of Kohler Cat. No.-K-25068IN-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 81 | Supplying all materials, labour, T&P and fixing standard sized automatic soap dispenser of Kohler Cat. No.-K-10712D-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 82 | Supplying all materials, labour, T&P and fixing 2-way bib tap in polished chrome of Kohler Cat. No.-K-25432IN-4-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 83 | Supplying all materials, labour, T&P and fixing health faucet with hose & bracket in polished chrome of Kohler Cat. No.-K-97258IN-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 84 | Providing and fixing C.P. Glass shelf 600mm long of Kohler Cat. No.-K-5636IN-CP or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 85 | Supplying all materials, labour, T&P and fixing standard sizedTissue holder in polished chrome of Kohler cat. No.-K-5633IN-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 86 | Supplying all materials, labour, T&P and fixing of 203mm square CP overhead shower of Kohler Cat. No.-K-73038IN-CL-CP and arm K-20138IN-CP with provision of hand shower K-98444IN-CP, Shower hook K-9040IN-CP and Shower tube K-12067IN-CP or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 87 | Supplying all materials, labour, T&P and fixing standard sizedWall mixer of Kohler Cat. No.-K-23496IN-4-CP with K-882IN-NA or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 88 | Supplying all materials, labour, T&P and fixing standard sizedSingle robe hook in polished chrome of Kohler Cat. No.-K-5635IN-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 89 | Supplying all materials, labour, T&P and fixing standard sizedTowel rack in polished chrome of Kohler Cat. No.-K-17529T-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 90 | Supplying all materials, labour, T&P and fixing standard sizedTumbler Holder in polished chrome of Kohler Cat. No.-K-25074IN-CP or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 91 | Providing all materials, labour,T&P and fittings and fixing of flush valve of Jaquar Cat. No.-PRS 073 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 92 | Providing and fixing 6L step can in stainless steel of Kohler make having cat no K-17531T-ST etc complete as per PH specification and direction of the engineer in charge |
| 93 | Providing and fixing Floor drain in polished chrome with hole of Kohler make having cat no K-7275IN-CP for floor/nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 94 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) |
| 95 | 15 mm dia |
| 96 | 20 mm dia |
| 97 | 25 mm dia |
| 98 | 32 mm dia |
| 99 | Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) |
| 100 | 40mm dia |
| 101 | 50mm dia |
| 102 | Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. |
| 103 | 75mm dia |
| 104 | 110mm dia |
| 105 | Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 106 | 110mm dia Single Junction with door |
| 107 | 110mm dia Double Junction with door |
| 108 | 110mm dia Cowl |
| 109 | 110mm dia Plain Bend |
| 110 | 110mm dia SWR Door Bend |
| 111 | 125mm x 110mm Gulley Trap |
| 112 | 110mm dia Tee with door |
| 113 | 110mm dia Single Junction without door |
| 114 | 110mm dia Socket Plug |
| 115 | 110mm dia Pipe clip |
| 116 | 110mm diaCoupler |
| 117 | 75mm dia Plain Bend |
| 118 | Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. |
| 119 | 25mm Dia |
| 120 | 32mm Dia |
| 121 | 40mm Dia |
| 122 | 50mm Dia |
| 123 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 124 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 125 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 126 | Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. |
| 127 | Supplying all materials, labour, T&P and fittings and fixing of 2000 LTR Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) |
| 128 | Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. |
| 129 | Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge. |
| 130 | Construction of circular brick masonary manhole chamber of size 1.20 x 0.90 mtr including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M25 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge. |
| 131 | Extra for every additional depth of 0.10mtr or part there of manhole size 1200x900mm from 1100mm to 1650mm depth (data for 0.10 mtr per each) |
| 132 | Supplying all materials, labour, T&P and necessary materials towards laying of RCC NP2 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all complete as per direction of Engineer-in-charge. |
| 133 | 150mm Dia |
| 134 | 200mm Dia |
| 135 | Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification (A1-Type Bedding) |
| 136 | 150mm Dia |
| 137 | 200mm Dia |
| 138 | INTERIOR WORKS |
| 139 | Providingand fixing in position false ceilingGypsumboardceiling asperthe pattern and design at two levels with tray pattern and cornice to have diffused lighting arrangement madefrom 12.5mm tkFire line Gypsum board fixedwithmain G.I frame channels allalong the wall shallbe provided. Theframe work to be suspendedwith G.I flatsoradjustableM.Srodfromintermediate channelsusingnuts andbolts asrecommendedusing rawlsplugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm.Arrangements aretobe made toaccommodatelightfixtures,curtainrailsbyformingrecessedchannelswhichshall be done withjointingcompoundandpaper tape .Ceiling to beleveledandfreefromcracks . Items to be completed in allrespecttothearchitect\"s approval .Openings to bemade inthe ceiling as per architect \"s approval to accommodate lighting fixtures. Openinginthe ceiling are to be tiedwithperimeterchannelcompletewith the costof all labourand material i/c painting withacrylicemulsion paintingof two coatswithprimercoat . |
| 140 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DuneSupreme (Bevelled Tegular) Edge Tiles With Armstrong 15mmExposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 44%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68Kgs/M2 & minimum pull out strength of 100 Kgs..Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 30 year warranty.To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre.The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module.Cut cross tees longer than 600mm require independent support.600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. |
| 141 | Providingand fixing in position false ceilingWaterproof Gypsumboardceiling asperthe pattern and design at two levels with tray pattern and cornice to have diffused lighting arrangement madefrom 12.5mm tkWaterproof Gypsum board fixedwithmain G.I frame channels allalong the wall shallbe provided. Theframe work to be suspendedwith G.I flatsoradjustableM.Srodfromintermediate channelsusingnuts andbolts asrecommendedusing rawlsplugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm.Arrangements aretobe made toaccommodatelightfixtures,curtainrailsbyformingrecessedchannelswhichshall be done withjointingcompoundandpaper tape .Ceiling to beleveledandfreefromcracks . Items to be completed in allrespecttothearchitect\"s approval .Openings to bemade inthe ceiling as per architect \"s approval to accommodate lighting fixtures. Openinginthe ceiling are to be tiedwithperimeterchannelcompletewith the costof all labourand material i/c painting withacrylicemulsion paintingof two coatswithprimercoat . |
| 142 | Providing & fixing horizontal level suspended ceiling comprising of Knauf Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black / White). The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidthickity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5% at 60˚ as per ASTM D523 (Not applicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U-profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. |
| 143 | Providingand fixing in position false ceilingPOPboardceiling asperthe pattern and design at two levels with tray pattern and cornice to have diffused lighting arrangement madefrom 12.5mm tkpop board fixedwithmain G.I frame channels allalong the wall shallbe provided. Theframe work to be suspendedwith G.I flatsoradjustableM.Srodfromintermediate channelsusingnuts andbolts asrecommendedusing rawlsplugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm.Arrangements aretobe made toaccommodatelightfixtures,curtainrailsbyformingrecessedchannelswhichshall be done withjointingcompoundandpaper tape .Ceiling to beleveledandfreefromcracks . Items to be completed in allrespecttothearchitect\"s approval .Openings to bemade inthe ceiling as per architect \"s approval to accommodate lighting fixtures. Openinginthe ceiling are to be tiedwithperimeterchannelcompletewith the costof all labourand material i/c painting withacrylicemulsion paintingof two coatswithprimercoat . |
| 144 | Providing, fitting & fixing of premoulded decorative corner beading/moulding of GRC. Having cross sectional dimension 112x80mm or as per drawing design and fixing the same by providing PVC plug, screw, cornice adhesive, fevicol etc complete in all respect as per direction of Engineer-in-charge. |
| 145 | Providing Supply and installation of Oak Nature Engineering Wood flooring Specification as Below Giving the Pristen series of Mikasa wooden flooring, Size of Flooring is 1200mmx120mm thickness is 10mm, Top layer is.1mm Veneer pasted and bottom is 9 mm HDF, for the Installation used 2mm Underlayer providing by company, For the Accessories part using Skirting (1800x70x10mm), T profile (1800x58x10mm). All the accessories should be used of MIKASA so that company will be provided warrenty certificate. |
| 146 | Providing and laying 20mm thick Italian Marble flooring of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) including waxing and polishing, laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the marble if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. |
| 147 | Extra for Ornamental Decorative Italian Marble Flooring as per approved drawing, design and direction of Emgineer-in-charge. |
| 148 | Supply and installation of broadloom carpettiles of approved makes , shade & pattern for Auditorium front & aisles. Carpet shall be of Loop pile , of size 500 mm x500 mm havingpile yarn or equivalent material having minimum pile height of 2.9 mm and maximum total height of 9 mm with backing of 6mm thick open cell PUfoam. Carpets shall have inbuilt soil protection,fire resistance and antistatic properties. Carpets used shall also be certified from LEED/Griha certifiedwith a test for indoor hygiene properties |
| 149 | Providing, fitting and fixing of WPC Fluted Louvers of Lumberlife make or equivalent make as wall Paneling over required base frame of aluminium/ply including cost of all materials, labour, T&P etc required to complete the work as per drawing, design and direction of Engineer-in-charge. |
| 150 | Supplying fitting and fixing in position customised wallpaper of dreamz / flow / icon of Marshall or equivalent make as per approved pattern and size to the internal surface of wall or partition including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 151 | Supplying and fixing Photo Frame of natural acrylic Art of approved size including cost of all materials, labour, T&P etc required to complete the work as per drawing, design and direction of Engineer-in-charge. |
| 152 | Providing and fixing of façade at all heights with extruded hollow Clay / Terracotta ventilated rainscreen tiles of height 250/ 300/ 400mm of approved texture,design and pattern having Flexural Strength/ Modulus of Rupture of ≥ 14 N/m² and maximum waterabsorption of 10% tested as per ISO 10545-4:2004(E) and ISO 10545-3:1995 respectively in truelevel fixed to a supporting aluminium framework(Alloy 6063 T5/T6) consisting of vertical ‘T’(for intermediates)/ ‘L’(for ends/ termination)/ Tubular sections (at corners)of size 80x60x2mm/40x60x2mm/40x40x2mm respectively, spaced at maximum spacing of 600mm c/c matchingto the tile vertical grid, and horizontal aluminium ‘C’-clamps of size 56x25x2mm thickness of length 150mm at junction of tiles and of length 75mm at wall ends/ corners fixed on top of thevertical sections at spacing of 250/ 300/ 400mm c/c matching to the tile horizontal grid with two numbers of self-drilling / self-tapping SS screws of size 5.5x25 mm with EPDM washers. The vertical ‘T’/’L/ Tubular’ sections shall be fixed to the wall using HDG (hot-dip-galvanized)steel L-brackets (galvanizing thickness of minimum 80 microns)of size 110x80x6 mm atintermediate vertical aluminium profiles and of size 220x110x12 mm at outer corners andstainless steel grade 304,M10 full threaded anchor fasteners with nylon sleeve 100mm long (for brick work) and M8 expansion anchor fasteners 75mm long for concrete surface, spacing of brackets to be based on a structural/ static calculation. The brackets shall be of length175mm at junction of two vertical aluminium profiles and of length 100mm at intermediatepoints of vertical profiles and shall be fixed to the vertical aluminium T / L / Tubular profilesusing two numbers self-drilling/ self-tapping SS screws of size 5.5x25mm with EPDM washers. EPDM gaskets to be fixed in between brackets and vertical profiles. The tiles shall be mountedon the ‘C’ clamps such that the tiles are supported at top and bottom at both ends. The tilesshall be additionally secured to the horizontal ‘C’ clamps using special SS clips of requiredsize which shall be inserted and pressed into position on the ‘C’ clamps holding the tiles andthe cut-tiles shall be glued at points to the horizontal ‘C’ clamps by using MS Polymer sealantadhesive. The vertical joint open groove between two adjacent tiles shall be 5mm. The tilesand system shall be designed to resist wind load as per IS 875 (Part 3) according to differentzones. The tiles shall be installed using the ventilated rain screen principle with provision fornatural ventilation of the space between the façade tiles and the structural wall. The work shallbe carried out as per specification, drawing and as per direction of the Engineer-in-Charge. |
| 153 | Providing and fitting arcthitrave made out 16mm 710+ marine grade BWP plywood with apporved shade of 0.6mm thick flitch veener. The width of panel would be between 50-60mm. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 154 | Providing and fixing in position wall-hung \"Vanity Counter\" of approved size with approved stone top made out of 19mm thick marine Grade plywood/ UPB Board / High Density WPC Board/ NFC boardfor top, bottom, sides, Partitions & 12mm thick marine grade Grade plywood / UPB Board / High Density WPC Board for back, 19mm / 12mm / 9mm / 4mm thick marine grade Grade plywood / UPB Board / High Density WPC Board/ NFC boardas required for internal shelves and drawers, with all exposed visible surfaces finished with 1.5mm approved laminate of matching shade, complete as per drawings including all types of wooden lipping, beading, & Hardware, screws etc of Hafele / Geze or Equivalent as approved, make, including satin matte melamine polish over approved stain to all exposed wooden surfaces, all complete as per drawing, design and direction of Engineer-in-charge. |
| 155 | Providingand putting in position wall paneling as per approved drawing made out of 12mm thick BWR ply over framing with 1mm thick approved colour laminate including cost of all materials, labours, T&P etc required for the work complete in all respect as per the drawing, design and direction of the engineer-in-charge. |
| 156 | Providing and placing Laser/CNC cutting mural made out of 12mm thick merino hanex board as per drawing, design and direction of Engineer-in-charge. |
| 157 | FURNITURE |
| 158 | KING SIZE BED: Supplying and fixing of King size Bed of size 1920x2150x1000mm (without Storage) withincludes side Panel, leg board and head board height(of size 1000 mm) center support (Two horizontaland one vertical support made out of hard / Soft wood ) madeoutof25mm BWP solid Plywoodwith1mmapprovedshade Laminate and The mattress rest will be12mm thick ply.All pressing Laminate on to the ply has be executed mechanically Hot press with polymersied D3 adhesive (Kleiberit/ Jowat / Henkel). The non exposed area will be cover up by 0.8mm balancer laminates.Allexposededgesshould be mechanically edgebanded with PVC tape ( Rehau/Dolkan) & hot melt glue ( Jowat/ Henkel & kleiberit) . All hardware fittings will be of Hettich/ Ebco make.It should have a knockdown arrangement of fitting. Make by VIbe by Transform Furnitures Pvt. Ltd. |
| 159 | BED SIDE TABLE: Supplyingandfixingofbed side table of size 600x400x400mm madeout of 16mm calibrated BWP plywood with approve shade of laminate with either side & inside 0.8mm balance laminate. All exposed sides has to be hot pressed ( D3 grade of Jowat/ Henkel / Kleiberit Glue).The said storage should have two sidepanels&a bottom Panel & a Top. It should be provided with a backpanel madeout of 6mm thickness. It should be provided with one drawer & openable sleves for storage. All hardware fittings will be of Hettich/ Ebco make.It should have a knockdown arrangement of fitting. Make by VIbe by Transform Furnitures Pvt. |
| 160 | PIE CHAIR: Supply of woodenCHAIR of size 580x580x800mm made out of solid wood( Ash & teak ) The same furniture will be finished with two coats of sealer followed by onetop coat in PU. The PU laquer form Sirca / Teknovance(Italy).Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 161 | CENTRE TABLE FULLMOON: Supplying ofcenter table (Roundshape 600mm dia & 450mm Ht.)made out of 16mm Brich Ply with four legs fixed on it central basis with a top resting on it. All the section hot pressed with approve shade of veneer. The edge of the top has to be inward chamfer to thin look. Leg shuild be finish with veneer. It should be finish withtwo coats of sealerand one PU Pigment top coat as per the specification match with RAL shade card .(Sirca Paint, Teknovace Wood Coating) .Buffer should be fixed at the bottom of the legs. It should have a knockdown arrangement of fitting. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 162 | WARDROBE: Supplyingandfixingof wardrobe- 1500x600x2100mm. madeout of 16mm calibrated BWP plywood with approve shade of laminate with exposeside & inside 0.8mm balancer laminate. All laminates has to be hot pressed with D3 glue (Jowat/ Henkel / Kleiberit Glue).The said wardrobe should have two sidepanels&a bottom Panel & a Top. It should be provided with a backpanel madeout of 6mm thickness.It should have multiple shutters according to the length. The wardrobe should be provided with shutters mounted on to the cabinets by full overlay auto shut Hinges.It should be provided with one side internal sleves for storage & other side for hanging rail.It should be provided withhandles. All exposed edges should be mechanically edgebanded by PVC tape ( Rehau & Dolkan) and hotmelt glue. it should have knockdown arrengement for fitting. It should be provided with plinth adjuster onthe bottom. All hardware fittings will be of Hettich / Hafelemake. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 163 | DRESSING UNIT WITH MIRROR: Supplying & fixing of Dressing unit Size- 1350X450X 300 with mirror Size-500X45X1200 madeoutof16mm calibrated BWP Plywoodwith1mmapprovedshade Laminate.All pressing Laminate on to the ply has be executed mechanically hot press with polymersied D3 adhesive (Kleiberit/ Jowat / Henkel). The non exposed area will be cover up by 0.8mm balancer laminates.Allexposededgesshould be mechanically edgebanded with PVC tape ( Rehau/Dolkan) & hot melt glue ( Jowat/ Henkel & kleiberit) . It should suspened with wall suspension bracketmakeof Hettich / Hafele. It should have a knockdown arrangement of fitting.Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 164 | TABLE WITH STORAGE: Supplying and fixing of Table with fixed storage of size 1350x600x750mm. The table top madeout of 25mm calibrated BWP plywood with approve shade of laminate having two side panel 25mm calibrated BWR ply continuing up to the floor connected by a 16mm modesty panel. with either side & inside 0.8mm balance laminate. All exposed sides has to be hot pressed ( D3 grade of Jowat/ Henkel / Kleiberit Glue). All exposed edges should be mechanically edgebanded by PVC tape ( Rehau & Dolkan) and hotmelt glue. It should be provision for one side storage. it should have knockdown arrengement for fitting. It should be provided with plinth adjuster onthe bottom. All hardware fittings will be of Hettich / Hafelemake. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 165 | LAGGAGE RACK: SupplyingandfixingofLuggageRack of size 1650x600x350mm madeoutof25mm BWP Plywoodwith1mmapprovedshade Laminate both side.All pressing Laminate on to the ply has be executed mechanically Hot press with polymersied D3 adhesive (Kleiberit/ Jowat / Henkel). It should have one top, Two legs and a modesty panel. The top should be provided with Alu Bidding as shown the image.Allexposededgesshould be mechanically edgebanded with PVC tape ( Rehau/Dolkan) & hot melt glue ( Jowat/ Henkel & kleiberit) . All hardware fittings will be of Hettich/Hafele make.It should have a knockdown arrangement of fitting, Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 166 | POISE THREE SEATER SOFA: Supplying of Three-Seater Sofa made out of solid wood ( Ash & Teak Seasoned) of Size in mm- 1820(L) x 766(D) x 800(H)havingfabric with Polyurethane foam( cushion foam density-40, Supersoft foan-S42, Seating cushion thickness 150mm & back rest 100mm, Cushion cover with Zip facility easy to remove and wash)inside structue Wooden Frame, Wooden handrest&woodenleg .The same furniture will be finished with two coats of sealer followed by onetop coat in PU. The PU laquer form (Sirca Paint, Teknovace Wood Coating & emporio) . It should haveknockdown arrangement of fitting.All hardwarewill be of Kapasi / Hettich & Hafele make, Make by Vibe by Transform Furnitures Pvt. Ltd. |
| 167 | POISE SINGLE SEATER SOFA: Supplying of Single-Seater Sofa made out of solid wood ( Ash & Teak Seasoned) of Size in mm- 820(L) X 766(D) X 800(H)havingfabric with Polyurethane foam( cushion foam density-40, Supersoft foan-S42, Seating cushion thickness 150mm & back rest 100mm, Cushion cover with Zip facility easy to remove and wash)inside structue Wooden Frame, Wooden handrest&woodenleg .The same furniture will be finished with two coats of sealer followed by onetop coat in PU. The PU laquer form (Sirca Paint, Teknovace Wood Coating & emporio) . It should haveknockdown arrangement of fitting.All hardwarewill be of Kapasi / Hettich & Hafele make, Make by Vibe by Transform Furnitures Pvt. Ltd. |
| 168 | CENTRE TABLE CORE: Supplying of Centre table of size 1000x500x300mm made out of legs with solid wood & 25mm ply top finish with apporved shade of 1mm thick flitches Veener. All exposed edges should be mechanicllay edge banded by matching 1mm thick veneer edge banding with hot melt gule (Jowat / Henkel). All pressing venner on to the ply has be executed mechanically by hot press and polymersied D3 adhesive (Kleiberit/ Jowat / Henkel). The non exposed area will be cover up by 0.8mm balancer laminate.The same furniture will be finished with two coats of sealer followed by onetop coat in PU. The PU laquer form Sirca / Teknovance(Italy).It should have a knockdown arrangement of fitting. All hardware fitting will beHettich / Hafele-Blum . Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 169 | CENTRE TABLE FULLMOON: Supplying of center table (Roundshape 450mm dia & 420mm Ht.)made out of 16mm Brich Ply with four legs fixed on it central basis with a top resting on it. All the section hot pressed with approve shade of veneer. The edge of the top has to be inward chamfer to thin look. Leg shuild be finish with veneer. It should be finish withtwo coats of sealerand one PU Pigment top coat as per the specification match with RAL shade card .(Sirca Paint, Teknovace Wood Coating) .Buffer should be fixed at the bottom of the legs. It should have a knockdown arrangement of fitting. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 170 | ENTRANCE CONSOLE GREET: Supplying and fixing Entrance Console of size 1100x325x825mm made out of legs with 25mm Caliberated plywood with Veneer& approved shade laminated top. The Legs will be finished with two coats of sealer followed by onetop coat in PU. The PU laquer form Sirca / Teknovance(Italy).Entrance Console derives its name from its cross, braised legs reinforced by slim structural elements. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 171 | ORBIT MIRROR: The Orbit Mirror is desiged to intensify the environment of any bedroom or living room wall, wielding a modish and sophisticated appearance in your home, while enhancing the effects of natural material and conveying a sense of wider spaces. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 172 | SOFA SINGLE SEATER SEPIA: Supplying of Single-Seater Sofa made out of solid wood ( Ash & Teak Seasoned) of Size in mm- 780(L) x 700(D) x 780(H)havingfabric with Polyurethane foam( cushion foam density-40, Supersoft foan-S42, Seating cushion thickness 150mm & back rest 100mm, Cushion cover with Zip facility easy to remove and wash)inside structue Wooden Frame, Wooden handrest&woodenleg .The same furniture will be finished with two coats of sealer followed by onetop coat in PU. The PU laquer form (Sirca Paint, Teknovace Wood Coating & emporio) . It should haveknockdown arrangement of fitting.All hardwarewill be of Kapasi / Hettich & Hafele make, Make by Vibe by Transform Furnitures Pvt. Ltd. |
| 173 | CENTRE TABLE CORE: Supplying of Centre table of size 1000x500x300mm made out of legs with solid wood & 25mm ply top finish with apporved shade of 1mm thick flitches Veener. All exposed edges should be mechanicllay edge banded by matching 1mm thick veneer edge banding with hot melt gule (Jowat / Henkel). All pressing venner on to the ply has be executed mechanically by hot press and polymersied D3 adhesive (Kleiberit/ Jowat / Henkel). The non exposed area will be cover up by 0.8mm balancer laminate.The same furniture will be finished with two coats of sealer followed by onetop coat in PU. The PU laquer form Sirca / Teknovance(Italy).It should have a knockdown arrangement of fitting. All hardware fitting will beHettich / Hafele-Blum . Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 174 | CAFE COMBO TABLE: Supplying and fixing Como table of size 900x900x750mm made out of legs with 25mm caliberated Ply & approved shade laminated 16mm caliberated Ply top with laminate. All pressing Laminate on to the ply has be executed mechanically Hot press with polymersied D3 adhesive (Kleiberit/ Jowat / Henkel). Allexposededgesshould be mechanically edgebanded with PVC tape ( Rehau/Dolkan) & hot melt glue ( Jowat/ Henkel & kleiberit) .The grid frame provides a strong base for an outwardly chamfered table top. It is sophisticated and understated with soft contemporary outlines and smooth edgesAll hardware fittings will be of Hettich/Hafele make.It should have a knockdown arrangement of fitting, Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 175 | PREECH CHAIR: Supply of chair of size 430x475x750mm made out of solid wood( Ash & teak ) The same furniture will be finished with two coats of sealer followed by onetop coat in PU. The PU laquer form Sirca / Teknovance(Italy). Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 176 | ELECTRICAL WORKS |
| 177 | Wiring to light points/fan point/exhaust fan point/Call bell point with 1.5-sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible condute with 6Amp, 250V Modular Switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) |
| 178 | Primery point |
| 179 | Secondary point |
| 180 | Call bell point |
| 181 | Wall bracket fan point specification same as above. |
| 182 | Exhaust fan point specification same as above. |
| 183 | Ceiling fan point consisting of modular regulator of Legrand make model name Myrius or equivalent on existing switch board |
| 184 | Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type ISI marked) |
| 185 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power) (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) |
| 186 | Supply and fixing of ISI marked modular type 2nos 6Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. |
| 187 | Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp plug with switch with all conection. |
| 188 | Supply& fixing of Modular type 25 Amp one way switch and socket outlet for AC point with metal box and modular cover. |
| 189 | Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm. |
| 190 | Submains: |
| 191 | Recessed/surface submain wiring alongwith earth wire with the following size of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in required dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required. (Make of wire-Finolex/ L&T/ Anchor/ Havells/KEI) |
| 192 | 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. |
| 193 | 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. |
| 194 | 2 x 6.0 sq.mm. + 1 x 2.5 sq.mm. |
| 195 | 4 x 4.0 sq.mm. + 2 x 2.5 sq.mm. |
| 196 | 4 x 6.0 sq.mm. + 2 x 2.5 sq.mm. |
| 197 | CONTROL PANELS : |
| 198 | Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge. |
| 199 | All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have Ics=100% Icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magnetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. |
| 200 | MAIN L.T. PANELS : |
| 201 | Incoming: |
| 202 | MCCB: 1 No 63A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. |
| 203 | SPD: 1No 50kA 4P T1+T2 |
| 204 | MCB \"C\": 1 No 63A 10kA 4P |
| 205 | outgoing |
| 206 | Busbar: 1 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm) |
| 207 | MCB \"C\" 4 Nos 40/63A 10kA 4P for TPN DB & Spare |
| 208 | MCB \"C\" 4 Nos 40/63A 10kA 2P for SPN DB & Spare |
| 209 | Instruments: |
| 210 | 1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT\"s |
| 211 | Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company IP 43 - #IK 09 with metal door having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. |
| 212 | UPS/Inverter Input DB |
| 213 | incoming/Outgoing: |
| 214 | 1 no of MCB \"C\": 40/63A (10kA) 2P |
| 215 | UPS/Inverter Output DB |
| 216 | incoming: |
| 217 | 1 no of MCB \"C\": 40/63A (10kA) 2P |
| 218 | Outgoing: |
| 219 | 3 no of MCB \"C\": 16A (10kA) 2P |
| 220 | 4way SPN DB |
| 221 | incoming |
| 222 | 1 no of MCB: 25A (10kA) 2P |
| 223 | outgoing |
| 224 | 2 nos of 6-32A SP MCB |
| 225 | 8way SPN DB |
| 226 | incoming |
| 227 | 1 no of MCB 40A (10kA) 2P |
| 228 | outgoing |
| 229 | 6 nos of 6-32A SP MCB |
| 230 | 4way TPN DB |
| 231 | incoming |
| 232 | 1 no of 63A 4P MCI |
| 233 | outgoing |
| 234 | 12 nos of 6-32A SP MCB |
| 235 | Cable Laying |
| 236 | Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. |
| 237 | 3&1/2 core x 25 sqmm A2XFY |
| 238 | Cable termination: |
| 239 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete as per the direction of Engineer-in-charge. |
| 240 | 3&1/2 core x25 sqmm A2XFY |
| 241 | Earthing |
| 242 | Earthing with Copper Earth Plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as per the direction of Engineer-in-charge. |
| 243 | Providing and fixing of 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 244 | Providing and fixing 4.00 mm dia hard drawn bare copper wire on surface or in recess for loop earthing as required. |
| 245 | Fittings & Fixtures |
| 246 | Supply,installation, testing & commissioning of following types of light fixtures directly on wall / ceiling of building with allaccessories such as drivers, lamps cover etc complete assembly including supply of all accessories and making connection from the suitable point outlet complete as per the direction of Engineer-in-charge. |
| 247 | 12 watt extruded aluminium batten available in 2ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting (with accessories) similar to make Signify Cat no. BN 021 LED12S complete. |
| 248 | 80w DuraLed Pro Well Glass is a PDC Aluminimum Housing with PC diffuser with roboust construction and high specifications for sustained lighting performance in harsh conditions. Product is deisgned for Ingress protection of IP65 and Impact resistance of IK08 with Eye Bolt and Cradle mounting assembly options.( Rate inclusive of all accessories) similar to make Signify Cat no. BY203P LED83S CW PSU PC SPD LILO complete. |
| 249 | 18 watt slim profile surface mounted downlight similar to make Signify Cat no. SM251C LED20S complete. |
| 250 | 8ft linear suspended fitting made of extruded aluminium. Fixture should have microprismatic diffuser and minimum efficacy at System level (Not Chip Level) >110lumens/watt and a minimum system lumen output of 4600(downlight) lumens. Luminaire should have Life of50000hrs@L70B50 Lumen maintenance,CCT 4000K, CRI >80,PF >0.95,and an operating Voltage Range of 140-270VAC. Internal Surge Protection 4KV. Fixture module should have 50 mm width.LED compartment to be independent from the Driver compartment. Access to the driver should be from the top of the luminaire and not through the diffuser and LED tray to avoid any damage to the diffuser, LED board of LEDs, maintain the linearity of the continuous formation and for ease of maintenance. Mechanical Joining – Factory fitted L bracket Provision for Mechanical joining of extrusions at middle level of the extrusion with screw and nut arrangement to avoid any light leakage for continuous formations. Also this joining should be from the top and not inside the LED compartment. Electrical looping of the extrusions being joined together to form a continuous formation should also be from the driver compartment at the top without disturbing the diffuser and LED tray or any other mechanical parts. The driver should comply with EMC / EMI compliance along with separate BIS certification for LED Driver & Luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to Signify/LT/OSRAM. similar to make Signify Cat no. SP783P LED56S 865 PSU W5L240 OD WH complete. |
| 251 | 36 watt SmartGlow is an intelligent office lighting recessed luminaire with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied similar to make Signify Cat no.RC383B LED 36S complete. |
| 252 | 10 watt Ultra sleek recessed downlight for low height false ceiling in square profile similar to make Signify Cat no.DN097B LED10S complete. |
| 253 | 6 watt Ultra sleek recessed downlight for low height false ceiling in square profile similar to make Signify Cat no.DN096B LED6S complete. |
| 254 | E-27 lamp base 9/10 watt LED decorative pendant light MS/ Aluminium material, matt gold colour similar to make Philips Roseate Pendant model no. 58137 complete. |
| 255 | 10 watt LED decorative wall light Aluminum fixture with white Powder Coated material, similar to make Philips Duo LED Wall Light model no. 58154 complete. |
| 256 | 15 watt LED decorative wall light Plastic Diffuser and Metal Base material, Brushed Nickel for Metal Body and Milky White for Diffuser in colour similar to make Philips Oriel Next Wall light model no. 34143 Jal Dim complete. |
| 257 | 14 watt LED decorative floor standing light with Metal, Glass material, Bronze in colour similar to make Philips Outline Floor lamp model no. 40939 complete. |
| 258 | 3.6 watt LED decorative wash basin light with Synthetics material, Silver in colour similar to make Philips Jojoba Wall Light model no. 34034/14/86 complete. |
| 259 | 42 watt LED decorative chandelier light with Clear curving glass mushroom strip material, Chrome in colour similar to make Philips Mushroom model no.581861 complete. |
| 260 | 28 watt (5 meter) LED cove light with Driver, High quality LED for bright and true shades of white, Flexible and customisable, Superior adhesive for easy installation similar to make Signify Cat no.LED Strip SKYCove 5M WW complete. |
| 261 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, Ceiling Fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required similar to make Crompton Cat no.Energion Riviera Regulator complete. |
| 262 | Supply, delivery, installation, testing & commissioning of single phase 400mm sweep wall mount fan similar to make Crompton Cat no. WM Hiflo Wave Plus complete. |
| 263 | Supply, installation, testing & commissioning of metal Exhaust Fan 300mm sweep similar to make ‘Crompton’cat no Trans Air 12\" complete. |
| 264 | Supply, delivery, installation, testing & commissioning of plastic Ventilation fan 150mm sweep similar to make Crompton cat no Brisk Air Plus 6\" complete. |
| 265 | Supply & Fixing of electronic call bell ding dong two modular on entrance door way and as per the direction of Engineer-in-charge or Consultant. |
| 266 | 3.0KVA INVERTOR WITH 1 NO 250 AH BATTERY BACKUP |
| 267 | Supply, delivery, installation, testing & commissioning of of 3.0KVA Inverter with 180Minute battery backup including battery rack within enclousre cabinet |
| 268 | AIR CONDITIONING |
| 269 | VARIABLE REFRIGERANT FLOW/VOLUME SYSTEM |
| 270 | Supply ofFull Inverter VRF System with Modular type outdoor units (Top Discharge) , all scroll DC Inverter compressors for Cooling applications along with different types of indoors compitable with VRF ODUs with R 410a . All inverter capacity controlling compressors shall be suitable for 3 Phase, 50 Hz.. The outdoor fins should be with corrosion resistant chemical coating at factory only alongwith hydrophilic coating to shield it from Salt, Sand & other elements brought in by the air. The manufacturer must be OEM of its compressor, which is fitted in the VRF outdoor unit. It can work upto 53 Degree Celsius.All proposed outdoor unit should have minimum COP of 3.7 at 100% load conditionfor Cooling in standard AHRI test conditions (Ambient DBT-35 Deg C, Inside DBT 27 Def C/WBT 19 Deg C). Proposed outddor unit system should not have any deration in cooling capacity upto 39 Degree C ambient temepetrure . Make - Mitsubishi Electric, Hitachi, LG, Toshiba |
| 271 | 10 HP |
| 272 | 12 HP |
| 273 | Outdoor Kit |
| 274 | INDOOR UNIT |
| 275 | Supply of The Indoor units suitable for operation on 220V-240V, Single Phase, 50 Hz AC electric supply and shall have shall have electronic control valves to control refrigerant flow with washable Filters,BLDC motors. |
| 276 | 2.3 TR - Ductable Unit |
| 277 | 2.0 TR - Oneway Cassette AC |
| 278 | 1.5 TR - 4 Way Cassette AC |
| 279 | 2.0 TR - 4 Way Cassette AC |
| 280 | 3.0 TR - 4 Way Cassette AC |
| 281 | Cassette Panel |
| 282 | REFNET/Y-JOINT |
| 283 | Supply, Installation, testing and comissioning of copper Y-jointsand headers. |
| 284 | WIRELESS CONTROLLER |
| 285 | Supply, Installation, testing and comissioning of wireless remote controller for theCassette AC |
| 286 | Supply, Installation, testing and comissioning of wired remote controller for the fan coil unit installed in all the indoor unit |
| 287 | Installation VRF Outdoor Unit |
| 288 | 10 HP |
| 289 | 12 HP |
| 290 | Installation of VRF Indoor Unit |
| 291 | 2.3 TR - Ductable Unit |
| 292 | 2.0 TR - Oneway Cassette AC |
| 293 | 1.5 TR - 4 Way Cassette AC |
| 294 | 2.0 TR - 4 Way Cassette AC |
| 295 | 3.0 TR - 4 Way Cassette AC |
| 296 | REFRIGERANT PIPING |
| 297 | Supplying & Installation of interconnecting following sizes of one end expanded refrigerant copper pipe work of following outer diameter, insulated with 19/13 mm thick closed cell electrometric nitrile rubber tubular insulation between each set of indoor & outdoor units.The pipe shall have normal tube aluminium foil facedinsulation for inside and UV protective coating with 7 mile glass cloth for all exposed pipes as per specification. All piping inside the room shall be properly fixed and supported with galvanized steel suspender. |
| 298 | 28.6 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) |
| 299 | 22.2 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) |
| 300 | 19.1 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) |
| 301 | 15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm) |
| 302 | 12.7 mm O.D (wall Thickness-0.8 mm) (insulation : 19 mm) |
| 303 | Liquid Line |
| 304 | 15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm) |
| 305 | 12.7 mm O.D (wall Thickness-0.8 mm) (insulation : 13 mm) |
| 306 | 9.5 mm O.D (wall Thickness-0.8 mm) (insulation : 13 mm) |
| 307 | 6.4mm O.D (wall Thickness-0.8 mm) (insulation : 13 mm) |
| 308 | CONDENSATE DRAIN PIPING |
| 309 | Supply, installation, testing and commissioning of Rigidheavy class PVC pipingwith minimum 6 mm nitrile rubber insulation over the pipes ,complete withfittings, supports,U trap arrangement ,clean plug and accessories for unitsas perspecifications and technical specification. |
| 310 | 32mm dia |
| 311 | 40 mm dia |
| 312 | CABLE TRAY FOR REFRIGERANT PIPING |
| 313 | Supply,Installation, testing and commissioning of following size of perforated hot dip galvanized G.I cable tray with perforations not more than 17.5%, in convenient sections, joined with connectors, suspended from ceiling with G.I suspenders including bolts and nuts,etc.for carrying refrigerant pipe in outdoor application as required. |
| 314 | 300 mm width x 50 mm depth x 1.6 mm thickness |
| 315 | TRANSMISSION & CONTROL WIRING |
| 316 | Supply, Installation, testing and fixing of control cum transmission wiring in 25 mm dia PVC Conduit between indoor and outdoor units.(1.5 Sqmm X 2 Core - Copper) |
| 317 | GSS DUCT (SITE FABRICATED) |
| 318 | Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal ducting for supply/return/exhaust/freshairducts with all the accessories andhanging arrangement.It shall include bends,elbow,tees,spliter,fittings,gaskets andall accessories for complete installation of ducting.Refer tender specification for detail description. |
| 319 | 24 G (0.63 mm) |
| 320 | SUPPLY AIR GRILLE |
| 321 | Supply, installation, testing, balancingand fixingofPowder coated aluminium extruded grillwith aluminium construction collar damper for supplyairasper specification & thesizes will be as per schedules anddrawing.Refer technical specification for detail description. |
| 322 | DUCT INSULATION |
| 323 | Supply,Installation,Testing and commissioning of thermal insulation material for duct insulation.Itshall be anti-microbial closed cell cross linked polyethylene foam with aluminium foil.Thermal conductivity of the insulation material shall not exceed 0.032 W/m°K at an average temperature of 25°C.Density of the material shall be 25-30 Kg/m3.The product shall have temperature range of –40 °C to 105 °C. The insulation material shall be fire rated for \"Class 0\" for surface spread of flame test.Water vapour permeability shall not exceed 0.15ng/Pa.Sec.m. Thermal conductivity of the material shall not be affected by ageing, as per DIN 52616. The material must be tested for ageing effect in an accredited laboratory for a minimum period of five years to satisfy the ageing criteria. The smoke density of the materialshall not exceed 1. There shall be no toxicity in the emitted smoke, both under flaming and non-flaming conditions. The quoted price shall include adhesive and accessoriesrequired to fix the insulationinside theduct. |
| 324 | 13 mm |
| 325 | DOUBLE LAYER CANVAS CONNECTION |
| 326 | Supply,Installation,testing and commissioning of double Layer canvas connectionfire retardant cloth for the end connection of air handling unit, ceiling suspended unit, ductable indoor unit, fresh and exhaust air fan and smoke spill fan to reduce the vibration.It shall be fire rated for atleat 2 hrs.Refer tender specification for detail description. |
| 327 | Supply and Commissioning of VRF systems including additional referigernt R410Ain all respect to complete the systemas per site requirements |
| 328 | Lifting, Shifting of Indoor & Outdoor Unit from Transporter to Terrace |
| 329 | Supply, delivery, installtion, testing and commissioning of indoor floor mounted type distribution boards for common area made out of high quality polycarbonate (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of polyurethane, should withstand glow wire test at 9600C, should be flame retardant, the cabinate should have test certificate in accordance with IEC 60 439-1 (IS8623), IEC 60 439-2, CPRI (ASTA) (Party should submit copy of all test certificates during offer submitting) The panel should have hinged door with provision for cable entry, earthing studsasper specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete including necessary civil / fabrication work as requiredas per the direction of Engineer-in-charge. |
| 330 | All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have ics=100% icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magenetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. |
| 331 | Main Distribution Board |
| 332 | incoming |
| 333 | MCCB: 1 No 125A (25kA) 4P thermal magnetic(TM) with ROM & spreader links. |
| 334 | SPD: 1No 50kA 4P T1+T2 |
| 335 | MCB \"C\": 1 No 63A 10kA 4P |
| 336 | CHANGE OVER SWITCH : 1 no 125A 4P On Load Change OverSwitch. |
| 337 | outgoing |
| 338 | Busbar : 1 SET, 4Nos 200 Amp Copper Strips. (CD=1.6A/sqmm) |
| 339 | 3 nos 80A 25kA 4P MCCB with ROM spreader links, 5 nos 40A 10kA 2P MCB for indoor unit DB. |
| 340 | Instruments: |
| 341 | 1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT\"s |
| 342 | Sub Control Panel for Circkit of 2 nos outdoor |
| 343 | incoming : |
| 344 | MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) with ROM & spreader links. |
| 345 | outgoing |
| 346 | Busbar : 4 Nos 100A, 500V Electrolytic copper strips |
| 347 | 3 nos 63A/40A 10kA 4P MCB \"C\" for Outdoor Unit & Spare. |
| 348 | 1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT\"s |
| 349 | Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed companyhaving provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. |
| 350 | 8way SPN DB |
| 351 | incoming |
| 352 | 1 no of 32A 2P MCB \"C\" |
| 353 | outgoing |
| 354 | 6 nos of 6-32A SP MCB |
| 355 | Submains: |
| 356 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed 2mm thick PVC rigid conduit pipe as required complete as per direction of engineer in charge. |
| 357 | 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. |
| 358 | 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. |
| 359 | 4 x 6.0 sq.mm. + 2 x 2.5 sq.mm. |
| 360 | 4 x 10.0 sq.mm. + 2 x 4.0 sq.mm. |
| 361 | Cable Laying |
| 362 | Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. |
| 363 | 3&1/2 core x 50 sqmm A2XFY |
| 364 | 3&1/2 core x 25 sqmm A2XFY |
| 365 | Cable termination: |
| 366 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete as per the direction of Engineer-in-charge. |
| 367 | 3&1/2 core x 50 sqmm A2XFY |
| 368 | 3&1/2 core x 25 sqmm A2XFY |
| 369 | Earthing |
| 370 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and as per the direction of Engineer in charge. |
| 371 | Providing and fixing of 25 mm X 5 mm G.I. strip on surface or in recess forconnectionsetc. as required. |
| 372 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
