|
| 1 | Dismantling brick work or stone work in lime or cement mortor i/c stacking of dismantled materials asdirected by engineer in charge withen distance of 60m. As per S.I. NO.692 |
| 2 | Dismantling door and window including chaukhats with hold fast and including stacking of material as directed by the engineer-in- charge with in a distance of 60 metre. |
| 3 | Dismantling cement concret or brick or granolithic floors ic stacking of dismantled materials asdirected by engineer in charge withen distance of 60m. As per S.I. NO.697 |
| 4 | Dismantling existing plaster ic disposal of refuseasdirected by engineer in charge withen distance of 60m. As per S.I. NO.706 |
| 5 | Filling in toilet and other Internal Area Consolidation of Brick Bats all complete. As per Chapter 1 S. i. No. 1(F) |
| 6 | cement Concrete with 4cm gauge stone ballast coarse sand & cement in proportion of 1:4:8 In foundation and under floor including supply of all materials labour tools and plants etc required for proper completion of the work. |
| 7 | R.C.C. work with cement approved coarse sand and 2 cm. Gauge approvedstone grit in proportions of 1:1.5:3 in T. Beam, Slab Roof and R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid. Excluding GST. |
| 8 | Mild steel in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel its wastage bend hooks and authorized overlapping shall be measured and including cost of binding. Excluding GST |
| 9 | frist class brick work(M-150 ) in 1:4 cement and coarse sand 2.20 F.M.mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.305(a) |
| 10 | P/F 1mm thick M.S. sheet sliding shutters with frame and diagonal brance of 40x40x6mm angle iron 3.15mm gusset plates at the junction and corners hooks at top 25mm dia putty at bottom 40x40x6mm angles and t iron guldes at top and bottom respective inl. locking arrangement with handle etc complete and applying one priming coat of approved lead paint. |
| 11 | Providing and fixing double glazed hermetically sealed glazing inaluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 12 | 12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm inl. supply of all materials labour tools & plants etc. required for proper comp. of the work SOR 2022 SI No.-584 |
| 13 | Providing and laying vetrified floor tiles size of the 800mm x 800 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours andshades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with grey cement [email protected]/sqm including grouting the joints with withcementand matching pigments etc.complet as per SOR.No.14.27 |
| 14 | Supply and fixing 6mm china white glazed tiles in flooring or in skirting od dado lald with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing comp. inl. Supply of all material labour and t&p SOR 2022,S.I no.- 14.17 |
| 15 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge.With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles |
| 16 | Providing wall Putty on old surface with approved quallity material of berger/JK/Birla or Similar make two coats. SOR SI No.-15.27. |
| 17 | Painting or varnishing work in small areas or new wood work with one coat (up to one sqm)of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour , tools & plants etc. required for proper completion of the the work .paint to be used should confirm the ISI No.-103-1950. As per SOR SI No. 641 |
| 18 | Finishing Wall with weather caot of approved make and quality on old surface with two or more coat to give an even shade after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials labour tools and plants etc. required for proper completion of the work.SOR SI No. 15.24 |
| 19 | Finishing walls with weather coats byPremium Acrylic exterior paint applied @1.67lrt/10sqm (asian or berger brand) of approved make and quality on wall with two or more coats to give an even shade including a priming coat with cement primer of approved brand and manufacturing exterior primer applied @ 2.20kg/10sqm after thoroughly brushing the surface free from mortar dropping and other foreing matters and sand papered smooth including supply of all materials labour tools & plants etc required for proper completion of the work.as per SOR.No.15.23. |
| 20 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer- in-charge. |
| 21 | Providing & Fixing Brick Coba 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerclic cement concrete water proofing compound filled gaps of coba & top of coba mortar 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x 30cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, T&P etc complete for(SI No.11.14, New Item) |
| 22 | M-150 Brick work in 1:6 (one cement & six Corse sand) (1.25 F.M.) mortar in wall of one brick thick super structureincludingnecessary cutting and molding of bricks required so extra labour added. Excluding GST |
| 23 | Providing wall Putty on new surface with approved quallity material of berger/JK/Birla or Similar make two coats. SOR SI No.-15.26. |
| 24 | Providing and placing “Stay in Place PVC Wall formwork” made up of extruded Unplasticised Poly Vinyl Chloride (uPVC) consisting of Main panel, 3 way Connector, Starter Channel, Joint Panel, Connection Panels, Door/Window frame/trim panels etc. all complete as per manufacturer design and for all heights as per direction of Engineer-in-charge.125 mm wide Stay in Place PVC Wallform made of minimum 2.50 mmthick sections and minimum weight 21.97 kg /sqm of formwork. |
| 25 | Providing and fixing glazing in aluminium door,window,ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc.complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 26 | Providing & Fixing of Stainless Steel( 304 Grade Board) frame with green color base & white color refelective letter as per design & drawing of Work Description board. (As per office order no. 1150 dated 16.09.2023) PGM Camp |
| 27 | Retro-ReflectiveSheetingtype-XIwith4mmthickACMSingleSide:Providing&fixingofreflectivesignswithacorrosionresistant4mmthickwith0.4to0.5mmbothsidealuminiumskinaluminiumcompositepanelfacetobe fullycoveredwithHighIntensityprismaticsheetingtypeIVasperIRC-67:2012 retroreflective sheetingwithbackframeM$angleof35x35x5mm.Legends, letters,numeralsandbordersetcshouldbeasperMORTHspecificationNo-801.3.7Thesheetingshallhave pressure-sensitiveadhesiveofthe aggressive-tacktyperequiringnoheat,solventotherpreparationforadhesion toasmoothcleansurface,inamannerrecommendedbythesheeting manufacturer.TheACM(Aluminium CompositeMaterials)shallbefixedonthe Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. The Retro reflectivesheetingshallbetestedforacertificateofhavingthesheetingtested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, linerremoval,adhesion,impactresistance,specularglossand fungus resistance, 3 years outdoor weathering and its having passed these tests shallbe obtainedfromInternational/Government Laboratory/Institute bythemanufacturerofthesheetingandincasethecertificateisobtainedfrom Internationalcondition,itshouldalsobeobtainedfromIndiancondition within 3yearsoflaunchingofproductbythemanufactureinabroad.Alternatively,a certificate conforming to ASTM Specification (D 4956-09) on artificial acceleratedweatheringrequirementsfromareputedlaboratoryinIndiacanbe acceptedprovisionally.Insuchasituation,theEmployer/Client,ifsodesires, couldseekforaperformanceguaranteewhichwouldbereleasedafterreceipt ofcertificatemeetingtherequirementofthreeyearsoutdoorweatheringoftsheeting as per IRC 67:2012& Proofof the same Report shall be uploaded which quoting tender.Therateshall include all materials,labour, T&P, transportation,installationandincidentalsallcompleteasperdirectionofthe Engineer-in-Charge. SOR Aligarh 20-05-2022 |
| 28 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). SOR Ghaziabad New Item 20.13 |
| 29 | White glazed earthen ware (European type) W.C. Pan 580 mm Dia |
| 30 | White glazed earthen ware (Indian type) W.C. Pan 510 mm Dia |
| 31 | Flat back or angular front Lipper urinal basin of white glazed earthen ware 465x355x265 mm |
| 32 | Wash hand basin 550x400 mm size of white glazed earthen ware (22\"x16\") |
| 33 | Providing and fixing 10 litter (full flush) capacity white PVC low level flushing cistern made of vitreous china with all fitting and fixtures complete |
| 34 | P.V.C. Waste Pipe for Urinal and W.H.B. |
| 35 | P.V.C. connection 450 mm Long with two brass units 15 mm Dia |
| 36 | C.P. Brass Waste Jali for Wash Basin |
| 37 | R.S. bracket for flushing cistern/sink & was hand basin. |
| 38 | C.P. Bib Cock heavy quality 5 mm dia 200 gm(Gem Mikado/Encess\"s Williams or eqv.) |
| 39 | C.P. Pillar cock with Brass Spindle 15 mm Dia |
| 40 | C.P. Stop Cock heavy quality 5 mm dia 200 gm (Gem Mikado/Encess\"s Williams or eqv.) |
| 41 | C. P. Urinal Cock heavy quality 5 mm dia 200 gm (Gem Mikado/Encess\"s Williams or eqv.) |
| 42 | PVC water storage tank Syntax or equivalent |
| 43 | G. I. Pipe Class B 25 mm dia |
| 44 | Full way Gate Valve 25 mm dia |
| 45 | G. I. Tee 25 mm Dia |
| 46 | G. I. Elbow 25 mm Dia |
| 47 | G. I. Socket 25 mm Dia |
| 48 | B.G. I. Union 25 mm Dia |
| 49 | PVC ball float valve with brass & union complete 15 mm |
| 50 | G. I. Pipe Class B 15 mm dia |
| 51 | G. I. Elbow 15 mm Dia |
| 52 | G. I. Socket 15 mm Dia |
| 53 | G. I. Nipple 50 mm long 15 mm Dia |
| 54 | S.W. gully trap 130x100 mm size |
| 55 | PVC Pipe 110 mm dia ISI Marked |
| 56 | PVC Bend 100 mm dia |
| 57 | PVC Socket 100 mm dia |
| 58 | Mirror of Atul make with Indian Polish of 600x450 mm dia Size with beveled edge |
| 59 | G.I. Reducing Tee 20x20x15 mm dia |
| 60 | Fixing 100mm size \"P\" or \"S\" trap for water closet squatting pan including jointing the trap with the pan & pipe in cement mortar 1:1(1Cement:1Fine sand) |
| 61 | Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.5 m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30m. from the foundation trenches. Excluding GST |
| 62 | Cement concrete with 4 cm. gauge approved stone ballast approve coarse sand and cement in the proportion of 1:4:8 in foundation including supply of all materials labour and T&P etc. required for proper completion of the work. Excluding GST |
| 63 | M-150 Brick work in 1:6 (one cement & six fine sand) (1.25 F.M.) mortar in foundation and plinth including supply of all materials, labour & tools & plants etc required for proper completion of the work. Excluding GST |
| 64 | R.C.C. work with cement approved coarse sand and 2 cm. Gauge approvedstone grit in proportions of 1:1.5:3 in T. Beam, Slab Roof and R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid. Excluding GST. |
| 65 | 2 cm thick cement plaster plaster in dado or skirting in 1:2 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3 mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour and T&P etc. required for proper completion of the work Excluding GST |
| 66 | Mild steel in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel its wastage bend hooks and authorized overlapping shall be measured and including cost of binding. Excluding GST |
| 67 | Supply and laying of S. W Pipe in 600 mm length prefect made 150mm dia |
| 68 | PVC Vent Cowl 100 mm dia |
| 69 | PVC Pipe 110 mm dia ISI Marked |
| 70 | Class 150 brick batts including supply of all materials, labour and tools etc. required for proper completion of the work. |
| 71 | Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.5 m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30m. from the foundation trenches. Excluding GST |
| 72 | Cement concrete with 4 cm. gauge approved stone ballast approve coarse sand and cement in the proportion of 1:4:8 in foundation including supply of all materials labour and T&P etc. required for proper completion of the work. Excluding GST |
| 73 | M-150 Brick work in 1:6 (one cement & six fine sand) (1.25 F.M.) mortar in foundation and plinth including supply of all materials, labour & tools & plants etc required for proper completion of the work. Excluding GST |
| 74 | R.C.C. work with cement approved coarse sand and 2 cm. Gauge approvedstone grit in proportions of 1:1.5:3 in T. Beam, Slab Roof and R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid. Excluding GST. |
| 75 | 2 cm thick cement plaster plaster in dado or skirting in 1:2 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3 mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour and T&P etc. required for proper completion of the work Excluding GST |
| 76 | Granolithic Marble without base concrete flooring 4 cm thick consisting of 2 cm thick layer of 1 part cement, 2 parts of approved coarse sand and r parts of 2 cm graded approved stone chips including 5 mm thick surface coat with ordinary cement black and white or grey or mixed marble chips passing 3mmbut retained on 1.5 mm mesh screen in proportion of 1:2 as specified or directed by the engineer in charge and polished by hand or machine and finally finished with French Mansion Polish or any other approvedpolish including supply of all materials, labor and T & P etc. required for completion of the work. Excluding GST |
| 77 | Mild steel in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel its wastage bend hooks and authorized overlapping shall be measured and including cost of binding. Excluding GST |
| 78 | Electric Work |
