Name of Work:Renovation of CAM centre ground floor for Open office in IIMC Campus.
Sl. No.
Item Description
1
Taking out existing partition/ceiling of particle board, masonite board, ply board, soft board, aluminium, glass etc. of any thickness.
2
Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge.(Excluding cost of glass/ panel board)10-12 Micron thickness Annodizing film.Natural white.For unsupported length of vertical member above 1.50m. height of both ends of vertical member restrained but panel above 0.90 sqm
3
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.4mm thick coloured / tinted / smoke glass.
4
Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)
5
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EICOne CoatWater based interior grade Acrylic Primer
6
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)Standard Quality
7
Supplying & laying of approved brand of scratch proof, semi flexible P.V.C. blended homogeneous marble Vinyle flooring in tiles conforming to IS:3461, fixing with synthetic acrylic adhesive after preparing the floor, levelling & smothaning when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge.2 mm thick
8
ProvidingandfixingoffalseceilingwithpowdercoatedexposedG.I.grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid spandeflectionnot exceeding1/360spanwith hanger spacingof 1200mmc/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and WallAngle.TheWallAngleshallbefixedonPVCDashFastenersonthe perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm diaG.I.wirefrompurlins/soffit.15mmthickOWAcousticBoard(MineralFiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value>0.65shouldbeplacedintheGridmoduletoformaFalseCeiling.All complete as per the drawing & directions of Engineer-in-charge.In all floor.a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U- 1520).
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
