|
| 1 | Supply of Material for Kitchen shed |
| 2 | Stone Aggregate(single size): 40 mm nominal size |
| 3 | Stone Aggregate(single size):20 mm nominal size |
| 4 | Coarse sand (zone III) |
| 5 | Portland Cement |
| 6 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 7 | Vibrator (Needle type 40 mm) |
| 8 | Sundries |
| 9 | wall form panel 1250x500 mm |
| 10 | Corner angle 45x45x5 mm 1.50 m long |
| 11 | 100 mm channel shoulder 2.5 m long |
| 12 | Double clip (bridge clip) |
| 13 | Single clip |
| 14 | M.S. Tube 40 mm dia |
| 15 | Structural steel such as tees, angles, channels and R.S. joists |
| 16 | Red oxide Zinc chromate primer |
| 17 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 18 | Beam clamp 300-380 mm (450-1070 mm) |
| 19 | Stone Aggregate(single size): 10 mm nominal size |
| 20 | Twisted steel/deformed bars |
| 21 | Solid blocks of size 30x20x15cm |
| 22 | Gravelly soil (including conveyance) |
| 23 | Second class kail wood in planks |
| 24 | Second class kail wood in scantling |
| 25 | Hollock ballies 125 mm diameter |
| 26 | Adjustable span ESO+SI (2.35-3.40) |
| 27 | Anjili wood scantls |
| 28 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 29 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 30 | Bright finished or black enameled mild steel screws 40 mm |
| 31 | Bright finished or black enameled mild steel screws 20 mm |
| 32 | Anjili wood planks |
| 33 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 34 | Mild Steel round bar above 12 mm dia |
| 35 | Flats up to 10 mm in thickness |
| 36 | Rawl plug 50 mm (designation 10 nos) |
| 37 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
| 38 | Chromium plated Brass screws 30 mm |
| 39 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 40 | Chromium plated Brass screws 25 mm |
| 41 | Brass 100 mm mortice latch and lock with 6 levers without pair of handles |
| 42 | Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock |
| 43 | Fine sand (zone IV) |
| 44 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 45 | Pink primer (for wood) |
| 46 | Plastic emulsion paint |
| 47 | Synthetic enamel paint in black or chocolate shade |
| 48 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 49 | Vitrified floor tile 60x60 cm |
| 50 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 51 | C.I. bracket for wash basin and sinks |
| 52 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 53 | Brass bib-cock-15 mm dia |
| 54 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 55 | PVC pipe 25 mm outer dia. 10kgf cm2 |
| 56 | PVC pipe 32 mm outer dia 6Kgf/cm2 |
| 57 | PVC pipe 63 mm outer dia. 4 kgf/cm2 |
| 58 | PVC Elbow 63 mm dia |
