|
| 1 | Taking downand removing chowkats with shutters (withouttaking off shutters from chowkat)not exceeding 1.50 Sqmeach complete all as specified and directed. |
| 2 | Taking downand removing chowkats with shutters (withouttaking off shutters from chowkat)not exceeding 1.50 Sqmeach complete all as specified and directed. |
| 3 | Taking down shutter of any description exc 1 sqm but not exc 2 sqm each and refixing in same opening complete all as specified and directed. |
| 4 | Taking down shutter of any descriptionexc 2 sqm each and refixing in same opening complete all as specified and directed. |
| 5 | Resecuring or easing & adjusting without taking down Shutters of any descriptionexc 1 sqm but not exc 2 Sqm each, complete all as specified. |
| 6 | Resecuring or easing & adjusting without taking down Shutters of any descriptionexc 2 sqm each, complete all as specified. |
| 7 | Taking down aluinium door/window shutters , keeping in safe custody and refixing in same opening after tightening of members , refixing of glass panes and rubber beads including adjusting old hydraulic door closer, complete all as specified. |
| 8 | Ist class soft wood, Pieces, small let in for makinggood where hinges, etc. have been removed from chowkhats or frames, joinery, etc. including painting or oiling to match, if required, complete all as specified. |
| 9 | Ist class soft wood, Beads, straight (any size) forglazed or gauzed joinery, renewed, including mitres etc. and removing old beads from site, complete all as specified. |
| 10 | Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in built incement mortar 1:6, including demolition og existing masonary and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m all as specified & directed. |
| 11 | Walling of random rubble stone masonry uncoarsedwell bonded bedded and soilidly hearted built in CM 1:6, including demolition og existing masonary and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m , complete all as specified and directed. |
| 12 | 2nd class hardwood (Sal) plain solid straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 13 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as shown on page No176 to 183 of MES SSR 2020 Part-II compete all as specified and directed.(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 14 | Powder coated, Anodised aluminium frame powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing of glass, particle board,aluminium frame etc complete all as specified and directed. |
| 15 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Pane of 4 mm thick sheet glass to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails anddecorative PVC beading of 10mm x 10mm (900 ), and joined together with solvent cement, suppling & fixing in the frame at site, complete as shown on page No176 to 183 of MES SSR 2020 Part-II compete all as specified and directed. |
| 16 | 35 mm thick2nd class hard wood (Sal/Hollock) factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle boardwith commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified. |
| 17 | 35 mm thick2nd class hard wood (Sal/Hollock) glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc, sizes of members ofdoor shutters as specified in SSR- 2009Part-I Section 8.24(a) complete all as specified and directed. |
| 18 | Powder coated, Anodised aluminium door shutters powder coated, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, anodised aluminum snap beading screws etc. complete all as specified. |
| 19 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 20 | Aluminium powder coated three track sliding windows (with three sliding shutters, (One with stainless steel wire gauge 0.36mm nominal dia of wire and average width of aperture 1.40mm and two with tinted glass panes 4mm thick) , aluminium frame not less than of scetion 1.63Kg/m, aluminium sections not less than 1.1 kg per meter for bottom track and top track and side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides, 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading channel gasket, nylon rollers Maruthi lock with handles etc complete all as specified and directed |
| 21 | Aluminium powder coatedventilators with frame of section not less tan 0.55 kg/m with 4mm thick frosted glass louvers and including0.36mm dia and 1.18mm aperture stainless steel jally (Fixed outside of ventilator) all as specified and directed. |
| 22 | Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x35mm double rebated comprisesgauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No\"s for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge.(viii) 10mm square guard bar complete(ix) 3mm thick sheet glass fixed with putty complete (x) Galvanised mild steel wire cloth 0.56mm nominal dia and average width of aperature 1.18mm (xi) two coats of sunthectc enamel paint (xii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07. Make : As per Appendix \"C\". Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of AGE(I) during working hours on any working day. |
| 23 | Steel ventilator with top hung shutters 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x35mm double rebated comprisesgauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No\"s for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge.(viii) 10mm square guard bar complete(ix) 3mm thick sheet glass fixed with putty complete (x) Galvanised mild steel wire cloth 0.56mm nominal dia and average width of aperature 1.18mm (xi) two coats of sunthectc enamel paint (xii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07. Make : As per Appendix \"C\". Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of AGE(I) during working hours on any working day. |
| 24 | Aluminium handles, cast type, anodised of size 100 mm complete all as specified and directed. |
| 25 | Aluminium handles, cast type, anodised of size 125 mm complete all as specified and directed. |
| 26 | Aluminium handles, cast type, anodised of size 150 mm complete all as specified and directed. |
| 27 | Mild steel barrel tower bolts, stove enamelledblack, with bright bolt and fixed of size 200 mm complete all as specified and directed. |
| 28 | Parliament hinges aluminium alloy anodised and fixed, width of recess between flanges 75mm (when open), complete all as specified. |
| 29 | 300mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 30 | 300mm, Mild Steel, ordinary rat tail rod pattern springs including roller and roller plate completeall as specified and directed. |
| 31 | Aluminium (die cast) body ,door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg , fixed in repair , complete all as specified and directed. |
| 32 | Aluminium mortice lock, 4 levers,vertical type, 75 mm size for doors, fixed in repairall as specified. |
| 33 | Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, complete all as specified and directed. |
| 34 | 100mm size, Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified. |
| 35 | 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified. |
| 36 | Galvanished mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanished wire staples complete all as specified and directed. |
| 37 | Galvanished mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanished wire staples , fixed in repair ,complete all as specified and directed. |
| 38 | Sheet glass, 4.8mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed. |
| 39 | Sheet glass, 3mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane, including hacking out old glasscomplete all as specified and directed. |
| 40 | Continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flap 30mm (when open), complete all as specified. |
| 41 | 18/19mm thick, Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination , fixed with screws to timber frame work complete all as specified and directed, fixed in repair, complete all as specified. |
| 42 | PVC Wall Panelling , hollow cored, 5mm thick, decorative designs , fire resistant, water and heat proof, having tongue and groove edges for easy assembling with all accessories such as U cap, end cap, Tee, plugs, fillets and screws etc. and fixing as per manufacturer\"s instructions, complete all as specified. |
| 43 | 25mm dia, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and as directed. |
| 44 | Steel rolling shutters, without ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete (Thickness of laths 1.00 mm): push pull or manual type, complete all as specified. |
| 45 | Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified. |
| 46 | Ball bearing for rolling shutters, complete all as specified. |
| 47 | Mild steel work as in hold fasts; wall ties and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified. |
| 48 | Running welding in repairs (thickness of metal to be welded exc 6mm bot noy exc 9mm) , such as gate , door , window etc. complete all as specified and as directed.Note : The rates include for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required. |
| 49 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) ofapproved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mmcentre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 50 | Mat finish, premium quality, joint free (edge cut), coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match including dismantling old tiles complete all as specified and directed. Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 51 | Vitrified ceramic tiles (Dark shade) 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as directed by EIC, as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 including dismantling old tiles complete all as specified and directed. |
| 52 | Glazed ceramic colouredtilesof size450 mm x 350 mm x7 mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:3 including dismantling old tiles complete all as specified and directed. Note : Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 53 | Glazed ceramic colouredtilesof size300 mm x 200 mm x7 mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:3 including dismantling old tiles complete all as specified and directed. Note : Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 54 | Machine cut kota stone slab flooring 20-25 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 including cutting, rubbing, grinding and polishing to achieve mirror finish complete, including demolition of existing flooring, complete all as specified. |
| 55 | Mirror polishing on old marble / granite / Kota stone / stone work where ever required to give high gloss finish complete complete, all as specified. |
| 56 | Rendering cement plaster 20mm thick in cement mortar 1:4 (1 cement :4 coarse sand) in two layers (10mm thick first layer and 10mm thick second layer) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, surface finished even and smooth without using extra cement, complete all as specified. |
| 57 | Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement :4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement,including taking down cement plaster, complete all as specified. |
| 58 | Rendering cement plaster 15mm thick in cement mortar 1:6(1 cement :6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement,including taking down cement plaster, complete all as specified. |
| 59 | Preperation of old plastered/painted surface of wall and applying wall care cement based putty 2mm thick , as per manufacturer\"s instructions, complete all as specified.Note : Where thickness of putty required is more than 2mm , the same shall be made good using POP and than putty shall be applied to obtain even and smooth surface and nothing extra shall be admisible on this account. |
| 60 | Preparation of old wooden surfaces of any description, not otherwise described, over 10cm in width or girthand applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 61 | Preparation of old steel surfaces of any description, not otherwise described, over 10cm in width or girthand applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 62 | Preparation of new wooden surfaces of any description, not otherwise described, over 10cm in width or girthand applying two coats of synthetic enamel paintover a coat of pinkprimer complete all as specified and directed. |
| 63 | Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise describedand applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 64 | Preparation ofnewplastered surfaces or un plastered, previously undecorated wall surfaces and applyingtwo coats of oil bound distemper over a coat of primer, complete all as specified and directed. |
| 65 | Preparation ofnewplastered surfaces or un plastered, previously undecorated wall surfaces and applyingtwo coats of cement base paint over one coat of alkali resistant primer, complete all as specified and directed. |
| 66 | 600x450 mm bevelled edge mirror of slected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screwed and cup washers. |
| 67 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 24 of tender doucments. |
