|
| 1 | 1) Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 2 | 2) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | b) 1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | 3) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm . |
| 6 | 4) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 7 | 5) Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 8 | a) 300x16 mm |
| 9 | b) 250x16 mm |
| 10 | 6) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 11 | a) 300x10 mm |
| 12 | b) 250x10 mm |
| 13 | c) 150x10 mm |
| 14 | 7) Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 15 | a) 125 mm |
| 16 | b) 100 mm |
| 17 | 8) Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper. |
| 18 | 9)Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 19 | 10) Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | 11) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand). |
| 21 | 12) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) |
| 22 | 13) 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) |
| 23 | 14) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 24 | 15) Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 25 | 16) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 26 | 17) White washing with lime to give an even shade :Old work (two or more coats) . |
| 27 | 18) Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) |
| 28 | 19) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 29 | 20) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. |
| 30 | 21) Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 31 | 22) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand). |
| 32 | 23) Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge |
| 33 | 24) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 34 | 25) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 35 | 26) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 36 | 27) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 37 | 28) Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 38 | 29) Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
| 39 | 30) Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 40 | 31) Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid |
| 41 | 32) Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe. |
| 42 | a) 32 mm dia. |
| 43 | b) 40 mm dia. |
| 44 | 33) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm. |
| 45 | 34) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 46 | a) 20 mm nominal outer dia. Pipes. |
| 47 | b) 25 mm nominal outer dia .Pipes. |
| 48 | c) 40 mm nominal outer dia. Pipes. |
| 49 | 35) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 50 | a) 25 mm nominal outer dia. Pipes. |
| 51 | b) 40 mm nominal outer dia. Pipes. |
| 52 | c) 50 mm nominal outer dia. Pipes. |
| 53 | 36) Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 54 | 37) Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 55 | 38) Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length.15 mm nominal bore. |
| 56 | 39) Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 57 | a) 20 mm nominal bore. |
| 58 | b) 25 mm nominal bore. |
| 59 | c) 40 mm nominal bore. |
| 60 | 40) Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 61 | 41) Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 62 | 42) Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 63 | 43) Providing and fixing PTMT pillar cock of approved quality and colour . 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 64 | 44) Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 65 | 45) Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 66 | 46) Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms. |
| 67 | 47) Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore. Weighing not less than 62 gms. |
| 68 | 48) Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : |
| 69 | a) 100 mm diameter |
| 70 | b) 150 mm diameter. |
| 71 | 49) Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : |
| 72 | a) 100 mm diameter S.W. pipe. |
| 73 | b) 150 mm diameter S.W. pipe. |
| 74 | 50) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 75 | a) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 76 | b) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 77 | 51) Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminium |
| 78 | 52) Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. |
| 79 | The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. |
| 80 | Note :- (1) The elevational area of the scaffolding shall be measured for payment purpose. |
| 81 | (2) The payment will be made once only for execution of all items for such works. |
| 82 | 53) Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge.25 mm average thickness. |
| 83 | 54) Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 84 | a) Bars above 12 mm diameter. |
| 85 | b) Bars above 12 mm diameter. |
| 86 | 55) Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. |
| 87 | 56) Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).25 mm average thickness in 2 layers. |
| 88 | 57) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 89 | (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 90 | Frame size 50 x 100 mm |
| 91 | 58) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 92 | 30 mm thick |
| 93 | 59) Removing glass panes from windows and replacing them with new glass panes with putty and nails wherever necessary : float glass panes of thickness 4mm |
| 94 | a) For windows in ground floor and /or for windows which can be accessed from inside of the room / bolcony with a ladder. |
| 95 | b) for windows in upper floors ( other than ground floor ) up to 10 floors with necessary Jhoola arrangement |
| 96 | 60) Cleaning of existing over head tank/ underground water storage tank by mechanical method of specified TANKCLEAN process in stages: |
| 97 | (1) Empty the tank/ sump and make it to near dry, (2) wash the tank internal surfaces and top of the tank with fresh water and clean/ rinse the inside surfaces of side walls, ceiling and floor surfaces perfectly by removing all scalling, fungus etc., with rotary jet mechanism, (3) Removing/ cleaning mud, silt, waste, sludge and garbage from the tankwith sludge pump/ vaccum cleaner and disposing outside the building, (4) After drying applt UV radiation with specified equipment in the tank for 15 minutes to kill the harmfull bacteria etc., complete all as per directions of the Engineer-in-charge. |
| 98 | (The rate includes filling of outlets of tank with cotton during cleaning marking of date of painting on the tanks and cleaning of all the dirt/ waste etc., and submission of certificate from specialised agency). |
| 99 | 61) Repairing of existing MS windows at all floor levels including arranging welding machine at site and providing necessary pieces of MS sections, providing friction hinges, providing window locking arrangements and making window operatable complete as directed. (Cost includes all incidental materials required, all operations mentioned etc) |
| 100 | 62) Cleaning of canopy/ chajjas by removing leaves grass dust, rubbish and other deposited / accumulated materials etc including removal of blockages/ chockages of khurras/ spouts of terrace/chajjas etc by disposal of rubbish to the dumping ground out side periphery of the building. |
| 101 | a) Blocked chajas, in accessible canopy & like upto First floor level . |
| 102 | b) Blocked chajas, inaccessible canopy & like Above first floor level . |
| 103 | 63) Charges for Cleaning of terrace slab, rain water entry spouts, khurras/ depressions/ sunk slabs and surrounding areas etc., by removing leaves, silt, grass, dust, rubbish, small plants and other deposited / accumulated materials from terrace etc., for smooth flow of water including disposal of waste etc., complete as per the directions of Engineer-in-Charge. (entire Terrace of one building shall be measured as one unit for payment). |
| 104 | 64) Providing and fixing CP brass two way bib cock of approved brand and manufacture - 15mm nominal bore. |
| 105 | 65) Cleaning of the surroundings of the staff quarters block including removing the dust, dead leaves, silt, waste etc., and disposing the waste out side the compound etc., complete as per the direction of the Engineer- in-charge. |
| 106 | 66) Uprooting & removal of vegetation at walls/ roofs/ chajjas and floors/ drainage systems/ water supplying stream of the building/over head tanks or at all levels, any location and applying any special chemical to defective area to prevent vegetation growth and finishing the same with cement concrete/ mortar to match the surface of walls/ floors/ roofs., etc complete as per the directions of engineer-in-charge (cement concrete/ mortar to be paid in separate item.) (Uprooting of vegetation in each location will be measured as one job) Up to floor two level. |
| 107 | Pruning/Cutting branches of trees at all levels for avoiding entering houses and obstructing colony lighting and electrical wire free passing and disposing the cutting pieces away from the compound to the dumping ground as directedby the engineer-in-charge. |
| 108 | 68) Removing the broken pipe/ coupling from the water line, cutting to required size, replacing with suitable uPVC pipe / uPVC coupling with the help of solution and refixing the pipe in original position on emergency basis (breakdown operartion) complete as directed by the Engineer-in-charge. |
| 109 | 69) Charges for making available the welding plant at site including to and from the shoap, providing necessary power supply arrangements, lugs etc., complete as per the direction of Engineer-in-charge. |
| 110 | 70) Dismantling existing damaged PVC water storage tank & fittings including removing from the existing position etc., complete. |
| 111 | 71) Providing and fixing PVC health faucet with 1.5m long PVC hose of approved brand and manufacture and of approved shade - 15mm |
| 112 | 72) Removing the damaged sanitary and water supply fittings and replacing them with new fittings including necessary white lead/ lead wool etc complete as directed by the Engineer - in - charge. |
| 113 | a) P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete - 10 litre capacity - White |
| 114 | b) Solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid. |
| 115 | c) P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - Semi rigid pipe : |
| 116 | (i) 32 mm dia. |
| 117 | ii) 40mm dia. |
| 118 | d) PTMT Waste Coupling of approved brand for wash basin and sink, of approved quality and colour. |
| 119 | (i) 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 120 | (ii) 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 121 | e) Unplasticised PVC connection pipe 15 mm nominal dia and 45 cm long with brass unions : |
| 122 | f) C.P. brass bib cock 15 mm nominal bore of approved quality conforming to IS:8931: |
| 123 | g) C.P. brass stop cock 15 mm nominal bore. of standard design and of approved make conforming to IS:8931. |
| 124 | h) C.P. brass pillar cock 15 mm nominal bore. of standard design and of approved make conforming to IS:8931. |
| 125 | i) PTMT bib cock 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour. |
| 126 | j) PTMT stop cock 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour. |
| 127 | k) PTMT pillar cock 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. of approved quality and colour . |
| 128 | l) PTMT grating 100 mm nominal dia. Circular type. of approved quality and colour. |
| 129 | m) PTMT shower rose - 15mm nominal bore |
| 130 | n) PVC Health faucet with wall support lever and 1.00m PVC pipe and PVC nozzle - 15mm nominal size. |
| 131 | o) CP brass two way bib cock conforming to IS:8931 - 15mm nominal size. |
| 132 | 73) Providing and fixing at all floors Type B - SWR grade uPVC pipes of approved make including all fittings such as plain / door bends, tees, elbows, equal or unequal junctions, heel rest sanitary bends, collars etc.( except floor traps/P traps) confirming to IS13592, IS 14735, including jointing with solvent and providing necessary supports, clamps/MS brackets at specified intervals. The joints of pipe and fittings shall be of drip seal jointing in exposed areas like in shafts etc. and pasted type (solvent ) for all other locations all complete and as per directions of Engineer - in - charge. MS brackets shall be paid separately |
| 133 | a) 75 mm |
| 134 | b) 100 mm. |
| 135 | 74) Cleaning of sewer lines, manholes etc.,at all depths. cost includes all labour for removing the sludge, silt, slush, waste etc., from the manholes and rodding the sewer lines by mobile sewer roding equipment from manhole to manhole to clear the blockage, including chokes in gully traps etc.and disposing the waste outside the compound etc., |
| 136 | 75) Cleaning of nahni traps/floor traps at all levels for removal of blockages including removing the silt, slush, waste etc ensuring smooth flow etc. All complete and as per the directions of the Engineer - in - charge. |
| 137 | 76) Providing clog cleaning of entire drainage system in the compound consisting of man holes, sewer lines, gulley traps etc., including remving the sludge, silt / waste etc from the manholes and disposing the waste out side the compound complete as per the directions of Engineer-in-charge. (Rate per cleaning system will be measured as One Job). |
| 138 | 77) Removal of vegetation at walls/ roofs and floors/ drainage systems/ water supplying stream of the building/ over head tanks or at any location and applying any special chemical to defective area to prevent vegetation growth and finishing the same with cement concrete/ mortar to match the surface of walls/ floors/ roofs., etc complete as per the directions of Engineer-in-charge. (cement concrete/mortar to be paid in separate item.) (Uprooting of vegetation in each location will be measured as one job). |
| 139 | 78) Cleaning of existing sanitary pipe alignment of 160/110 /75 mm dia in vertical and horizontal direction of all floors and all heights by opening door bend , clearing the deposited obstacles including rodding and refixing the doors with new rubber washer and jointing the same job includes replacing door covers bolts and nuts wherever required to arrest the leakage all as per directions of Engineer- In-Charge (opening of each door bend and removal of blockages including above operations will be measured as one job.) |
| 140 | 79) Replacing existing damaged sanitary pipes by providing UPVC SWR soil waste and vent pipes by cutting, removing, replacing with working pressure 6kgf/sq.cm conforming to IS : 13592 Type B including jointing with \"T\" shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant. (i) Single socketed pipe(couplings, other accesories will be paid seperately) |
| 141 | a) 110mm deameter |
| 142 | b) 75mm deameter |
| 143 | Replacing existing on wall face damaged unplasticised - PVC moulded fittings/ accessories with new fittings/accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A including cutting,replacing,jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 144 | a) Coupler |
| 145 | (i) 110mm |
| 146 | (ii) 75mm |
| 147 | b) Plain bend of required degree |
| 148 | (i) 110mm bend |
| 149 | (ii)75mm bend |
| 150 | c) Tee with door |
| 151 | (i) 110X110X110 |
| 152 | (ii)75X75X75 |
| 153 | d) Door bend |
| 154 | (i) 110mm |
| 155 | (ii)75mm |
| 156 | 81) Carting out of building rubbish / malba / similar unserviceable, dismantled, excavated or waste materials by mechanical means,through private carrier including lifting, loading, transporting, unloading to municipal dumping ground beyond 50 m initial lead,or in any other compound as decided by the Engineer-in-charge, for all leads including all lifts involved. |
| 157 | 82) Charges for arranging carpenter / plumber/Mason along with helper whereever required for attending minor repair works in the compound etc., complete as directed by the Engineer- in-charge. (The required fittings & fixtures exept screws/ nails, drilling etc.shall be paid separately and measured for each half day) |
| 158 | 83) Providing and fixing Pre-cast Man hole trap cover of INDO/KITTO make or equivalent of 25mm thickness of size 315 x 315 mm or of required size as per requirement for existing gully trap with necessary repairs etc all complete as per the directions of Engineer-in-Charge |
| 159 | 84) Intense deep cleaning of existing toilets flooring tiles & dadoing tiles of height 1.50m including cleaning of sanitory fittings like wash basins, water closets, flush tank, urinals, granite platform etc., complete by using chemical, detergents with hand machine etc., complete as per directions of Engg-in-Charge. |
| 160 | 85) Rebate for taking away unserviceable material after fixing new material etc., complete a) 15 mm brass bibcock / stop cock/pillar cocks. |
| 161 | 86) Rebate for taking away the unserviceable sanitary / water supply fittings including removing from the existing position . etc., complete. GI pipes 15mm/ 20mm/ 25mm/ 32mm /40mm . |
