|
| 1 | Earth work excavation hard soil or gravelly soilincluding dressing and leveling the bed and depositing the soil within initial lead of 50m and initial lift of 1.50m and breaking the clods 5cm to 7cmsize and laying in layer not exceeding 0.30m depth complete as per specification anddirection of the Engineer-in-Charge. |
| 2 | Filling in foundation & plinth with sand well watered to saturated condition and rammed including all cost, carriage, royalty, taxes of materials with all labour charges cess etc. complete as per the direction of the Engineer-in-Charge. |
| 3 | Cement Concrete(1:3:6) with 40mm size hard granite crusher broken metal confirming to relevant BIS specifications with all cost, conveyance, royalty of all materials T&P, cess including scaffolding, walkways & properly mixing, hoisting & placing concrete to desiredworkability & curing for recommended periodetc. complete as per the direction of the Engineer-in-Charge. |
| 4 | Brick work withFly ash Bricks25cmx 12cm x 8cm size having crushing strength not less than 75kg / sqcm with dimensional tolerance±8 percent in cement motar (1.6) in foundation including all cost of materials conveyance, royalty and all other taxes including watering and curring etc. complete as per the direction of the Engineer-in-Charge. |
| 5 | Brick work withFly ash Bricks25cmx 12cm x 8cm size having crushing strength not less than 75kg / sqcm with dimensional tolerance±8 percent in cement motar (1.6) in Superstructure including all cost of materials conveyance, royalty and all other taxes including watering and curring etc. complete as per the direction of the Engineer-in-Charge. |
| 6 | Cement Concrete M-20 with 20mm and downgraded size hard granite crusher broken chips for PCC / RCC work confirming to relevant BIS specifications for all materials including scaffolding, walkways & properly mixing, hoisting & laying with desired workability with all cost, conveyance, royalty of all materials, T&P labour charges, cess etc. complete including curring for recommended period as per the direction of the Engineer-in-Charge. (Column Base & footing) |
| 7 | Plinth beam |
| 8 | Lintels |
| 9 | Chajja |
| 10 | Columns and Beams |
| 11 | Roof Slab |
| 12 | Supplying, fitting, fixing of HYSD including labour charges for straightening, cutting, bending and binding the H.Y.S.D. Bar or tor steel and tying the grills and placing in position (confirming to I.S.I specification) including jointing if necessary by lapping, welding as required for R.C.C work as per approved drawing and design & binding with binding wire 18 to 20 gauge including cost carriage and other taxes of all materials with all leads, lifts & delifts of reinforcement bars etc. complete as per the direction of the Engineer-in-charge |
| 13 | 20mm thick cement plaster in cement mortar (1:4) as grading plaster in roof and slab confirming to BIS specifications with allcost, conveyance, royalty and labour charges, cess including scaffolding and curring for recommended period etc complete as per the direction of the Engineer-in-Charge. |
| 14 | Cement Concrete(1:4:8) with 40mm size and downgraded hard granite crusher broken metal confirming to relevant BIS specifications with all cost, conveyance, royalty of all materials T&P, cess including scaffolding, walkways & properly mixing, hoisting & placing concrete to desiredworkability & curing for recommended periodetc. complete as per the direction of the Engineer-in-Charge. |
| 15 | Providing and fixing vitrified tiles in floors, treads of steps and landing on 20mm thick bed of cement mortar (1:4) (1 cement:4 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 16 | Supplying fittting and fixing Cemamec wall tiles intrades, riserss and dadoosfloors of size 200mm x 300 mm of approved make confirming to IS : 13755 laid on 12 mm thgick cement mortar (1:3) and filling the joints with white cement of approved qualitty including cost of all materials, royalty, labour, T&P etc. required for the work all complete as per the direction of the Engineer-In-Charge. |
| 17 | Providing 6mm thick cement plastering (1:4) to RCC surfaces finished smooth including closed chipping, cleaning, adding adhesive to slurry treatment etc. all cost, carriage, royalty of materials, labourand all other taxes of materials with watering, curingetc complete as per the direction of the Engineer-in-Charge |
| 18 | Providing 16 mm thick cement plaster with cement mortar (1:6) over brick masonry including mixing of mortar and curing with cost, carriage, royalty of all materials & all labour charge, T&P etc. complete as per direction of the Engineer-in-Charge. |
| 19 | Providing 12 mm thick cement plaster with cement mortar (1:6) over brick masonry including mixing of mortar and curing with cost, carriage, royality of all materials & all labour charge, T&P etc. complete as per direction of the Engineer-in-Charge. |
| 20 | Finishing walls with water proofing weather coat of approved shade on new work two coats, over a coat of priming, to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 21 | Finishing walls with plastic emulsion paint of approved colour to approved shade two coats over a coat of primer to give an even shade including cost, conveyance, taxes of all materials, labour, T&P etc. complete as per direction of Engineer-in-Charge. |
| 22 | Supply, fitting & fixing of G.I. made gates, doors & windows frame with shutters as per approved design including cost of all ornamental materilas & all other taxes etc. complete as per the direction of the Engineer-in-charge. |
| 23 | Painting two coats over a coat of primer with any approved paint with brush to GI door including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 24 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx 32mm x 2mm @ 0.90Mtr corner to corner and stainless square pipe bracing of size 32mmx 32mm x 2mm in three rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P with all leads, lifts & delifts etc. complete as per direction of Engineer-in-Chief. |
