|
| 1 | 1. Construction Anganvadi building at PUM School Primises Madhappur H/O Madhappur |
| 2 | Earth work excavation for foundation in all soils such as redearth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,For Foundation |
| 3 | Cement concrete 1:4:8 mix usin 40 mm HBGSmetal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete.,For Foundation |
| 4 | supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for fillingetc.complete, |
| 5 | Re Filling with excavated earth as per standard specifications etc complete |
| 6 | Fly Ash Brick work in cement Mortor 1:5 (One cement and five sand) using second class Bricks of size 23 x 11.5 x 7.5 cms for the following including mixing mortar and all other labour charges etc complete. For Foundation and Basement |
| 7 | Above Basement -For Superstructure |
| 8 | Supplying and errecting shuttering including necessary support for plane surfaceincluding all R.C.C Works etc., Complete.Centering below Ground level |
| 9 | Rate for column post |
| 10 | Rate for sunshade |
| 11 | Rate for roof slab, lintel, beam |
| 12 | Supplying, fabricating and placing in position inild steel or ribbed tor steel and all reinforced cement Concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with Standard (MS rods or RTS rods) which will be supplied departmentally at section stores and cost will be recovered at issue rate.The binding wire shall be supplied by the Contractor. |
| 13 | R.C.C. 1:1.5:3-using 20mm ISS HBGS metal including cost and conveyance of materials and labour charges etc. complete |
| 14 | R.C.C. 1:1.5:3-using 20mm ISS HBGS metal including cost and conveyance of materials and labour charges etc. complete |
| 15 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including |
| 16 | Plastering with C. M 1:5 mix, 12 mm thick including cost and conveyance of all materials to site and labour charges etc complete. |
| 17 | Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm includingcost and conveyance of all materials to site and all labour charges etc complete |
| 18 | Dadooing with Glazes tiles of 200mmx300mm includingcost and conveyance of all materials to site and all labour charges etc complete |
| 19 | Distempering two coats using OLD or NEW Plastered surface using Oil Bound Distemper including cost and all Labour charges etc., complete |
| 20 | Painting two coats overNEW Plastered surface using Approved Quality of Exterior EmulsionPaintincluding cost and all Labour charges etc., complete |
| 21 | Painting two coats over new iron work using synthetic enamal paint including cost and conveyance of all materials to site etc complete |
| 22 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stoneM.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 23 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 24 | Supply and fabrication of steel door including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 25 | Door |
| 26 | Window 1 |
| 27 | Cost & Supply For Oriya Type Indian Water Closet 580mm x 440mm with “P”or “S” Trap including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 28 | European Water Closet with “P” or “S” Trap with DoubleFlapped Seat and Seat Cover with Brass Hinges and 10 litrecapacity PVC Low Level Flusing Tank with all internal fittings |
| 29 | Cost & Supply of Cudappah Slab including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 30 | ProvisionFor Handrails in Stainless Steel |
| 31 | ProvisionFor Cortoon Drawing |
| 32 | ProvisionFor Electrical Items |
| 33 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion withsuitable Colour for PVC concealed light (For Light/Fan Point.) (SD 25) |
| 34 | Renewal by Supply and fixing of 1400 mm (56\") AC ceiling fan complete with stepped electronic 300Wregulator with 300mm down rod on the existing clamp.(SD111) |
| 35 | Supply and fixing of 32 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitable TW Board with PWD Earthing(SD 645) |
| 36 | Supply and fixing of 32 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitable TW Board with PWD Earthing(SD 645) |
| 37 | Supply and fixing of 4\" 40 W Twin Mirror optic suspension type fitting (Philips / Crompton / Wipro) complete with louvers cover complete with copper choke andcondensor with conduit pipe suspension, with PVC unsheathed Copper leads from the terminals to the fittings with flu. tubes. (SD 96) |
| 38 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
