|
| 1 | Site Clearance |
| 2 | Dismentling brick workincluding base concrete and stacking of dismantled materials as directed by Engineer-in-charge with distance of 60 mts. …….. Complete item.15.7.4 |
| 3 | Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 mts. DSR 15.56 |
| 4 | Demolishing cement concrete manually/by mechanical means including disposal of materials within 50 meters lead as per direction of engineer in charge 15.2.2 |
| 5 | Dismantling tile work in floor and roof laid in cement motorstacking of dismantled materials as directed by engineer-in-charge with in distance of 60mts. DSR 15.23.1 |
| 6 | Cement Concrete with 4 cm. Gauge approved stone aggregate ,fine sand &cement in proportion of 8:4:1 ……………..complete item. DSR 4.1.8A |
| 7 | providing and applying water proofing treatment as asian water profing solution .complete all labourand material M.R. |
| 8 | Removing white or colour wash by scrapping and sand papering and preparing the urface smooth including neceary repairs to sscratches etc complete dsr 13.88 |
| 9 | Dismantlingand Removal of old Existing Electrification works |
| 10 | Dismantling ofold plumbing work |
| 11 | 12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete, DSR 13.4.1 |
| 12 | Providing and fixing of double glazed hermetically seald glazing in Aluminium windows,ventilators and partitionetcwith 6 mm thick clear float glass both side,having 12 mm air gap, w including providing EPDM gasket,perforated aluminium spacers,desiccants,sealant(both primiry and secondary sealent) all materials, labours, T&P etc all complete.DSR No-21.1 |
| 13 | Providing and laying 600x600mm vitrified tiles (chapter 14 flooring .DSR 11.41.2 |
| 14 | Class 150 brickwork in 1:4 cement mortor in Super structure DSR 6.4.1 |
| 15 | Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete.DSR 13.80 |
| 16 | Painting with interior or exterior paintover one coat of primer including all materials labours T&P etc all complete.DSR 13.48.1 |
| 17 | Finishing wall with two coat Premium acrylic smooth exteriorpaint with silicon additives ofrequired shed on previous surfaceschedule Si no 13.46.1 |
| 18 | Providing and fixingof PVC stripBLINDS with rod …. Etc. complete MR |
| 19 | providing and fixing wall panelling pvc materialwith material and labour complete .MR |
| 20 | Providing and fixing ceramicwall tiles of approved making in all the colour hades except over 12mm thick bed of cement 1:3 and jointing with cement slurry dsr 8.31 |
| 21 | Providing and fixing PVC false ceiling all complete work M.R |
| 22 | Providing and fixing flush door shutter ISI marked decorative type 33mm thick including steel but hinged ….completeDSR 9.20.2 |
| 23 | Providing and fixing of following dia U-PVC pipeType-B Supreme class ISI marked pipe lines : |
| 24 | 110mm dia DSR 12.41.2 |
| 25 | 40mm thick 1:2:4 plain cement concrete floor, laid in panels finished with 3mm floating coat of neat cement of cement and marble dust in ration 5:1including all materials, labours, T&P etc all complete.DSR 11.3.1 |
| 26 | Providing and fixing 12mm thk frameless toughened glass door shutter of approved brand and manufacturar, including providing and fixing of top & bottom pivot and spring type fixing arrangement and making necessary holes etc for fixing of required door fittings all complete as per direction of Engineer-in-charge (Door handle, lock & stopper etc to be paid seperately)21.18 |
| 27 | Cement Concrete with 4 cm. Gauge approved stone aggregate ,fine sand &cement in proportion of 8:4:1 ……………..complete item. DSR 4.1.8 |
| 28 | providing and laying factory made c c paver blocks 80mm thick of M-35 grade with approved colour design and pattern Dsr 16.91.2 |
| 29 | TOILET WORK |
| 30 | E/W in excavation in foundation in ordinary soil lift upto 1.50 mt……….complete item.DSR 2.8 |
| 31 | Cement Concrete with 4 cm. Gauge approved stone aggregate ,fine sand &cement in proportion of 8:4:1 ……………..complete item. DSR 4.1.8 |
| 32 | R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in Column, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the workAbove plinth level including cost of binding wire.DSR 5.2.2 |
| 33 | M-150 brick work in 1:6Cement & C. Sand Mortar in below plinth beam…Complete Item.sch item no.6.1.2 |
| 34 | Class 150 brickwork in 1:4 cement mortor in Super structure DSR 6.4.1 |
| 35 | Mild steel or ironin plain work such as reinforced cement concrete work wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping and hooks. Dsr 5.22.a.6 |
| 36 | 12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete, DSR 13.4.1 |
| 37 | 40mm thick 1:2:4 plain cement concrete floor, laid in panels finished with 3mm floating coat of neat cement of cement and marble dust in ration 5:1including all materials, labours, T&P etc all complete.DSR 11.3.1 |
| 38 | Providing and fixing ceramicwall tiles of approved making in all the colour hades except over 12mm thick bed of cement 1:3 and jointing with cement slurry dsr 8.31 |
| 39 | Providing and fixing 25mm thick PVC flush door shutter made out of one piece multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm etc all omplete. (DSR 9-118-3) |
| 40 | Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete.DSR 13.26 |
| 41 | Finishing wall with two coat Premium acrylic smooth exteriorpaint with silicon additives ofrequired shed on previous surfaceschedule Si no 13.46.1 |
| 42 | Prviding and fixing ISI marked MS heavy weight butt hinges (125mm) with necessary screw etc all complete. (DSR 9.56.1) |
| 43 | Prviding and fixing ISI marked Oxidised MS tower bolts (size 250x10mm) with necessary screw etc all complete. (DSR 9.63.1) |
| 44 | Prviding and fixing ISI marked Oxidised MS Handle (size 125mm) with necessary screw etc all complete. (DSR 9.66.1) |
| 45 | HALL |
| 46 | E/W in excavation in foundation in ordinary soil lift upto 1.50 mt……….complete item.DSR 2.8 |
| 47 | Earthwork in cutting or filling in ordinary soil form 5 k.m.DSR 2.25a |
| 48 | Cement Concrete with 4 cm. Gauge approved stone aggregate ,fine sand &cement in proportion of 8:4:1 ……………..complete item. DSR 4.1.8 |
| 49 | R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in Column, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the work up to plinth levelincluding cost of binding wire.DSR 5.1.2 |
| 50 | R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in Column, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the workAbove plinth level including cost of binding wire.DSR 5.2.2 |
| 51 | Mild steel or ironin plain work such as reinforced cement concrete work wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping and hooks. Dsr 5.22.a.6 |
| 52 | centering and shuttering including strutting proping etc removal of form work for |
| 53 | foundation footing base of column etcDSR 5.9.1 |
| 54 | column piller piers and struts etc DSR 5.9.6 |
| 55 | lintel beams plinth beamsand cantiliversetc DSR 5.9.5 |
| 56 | suspended floor roof landing balconies and cantiliver etc DSR 5.9.3 |
| 57 | M-150 brick work in 1:6Cement & C. Sand Mortar in below plinth beam…Complete Item.sch item no.6.1.2 |
| 58 | Class 150 brickwork in 1:4 cement mortor in Super structure DSR 6.4.1 |
| 59 | 12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete, DSR 13.4.1 |
| 60 | Providing and fixing tiled false celling of specified mateerials of size 595x595 mm in horizontal level,suspended on interlocking metal grid of Hot dipped galvanized steel section(galvenaized@ 120 grams/sqm both side inclusive) consisting of main T runner with suitably spaced joints to get require12.5mm thick tapered edge gypsum plain board (IS-2095) false ceiling at all height including providing and fixing of frame work made of special section, power pressed from MS sheet and galvanised with zinc coating as per IS-277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flange of 27mm and 37mm at 1200 center to center etc all complete (DSR 12.52.1) |
| 61 | Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete.DSR 13.26 |
| 62 | Painting with interior or exterior paintover one coat of primer including all materials labours T&P etc all complete.DSR 13.48.1 |
| 63 | Finishing wall with two coat of enemal paint of best quality including all materials, labours, T&P etc all complet.DSR 13.62.1 |
| 64 | Providing and fixing of 100mm dia PVC rain water pipeetc all complete.12.41.2 |
| 65 | Providing and fixing of double glazed hermetically seald glazing in Aluminium windows,ventilators and partitionetcwith 6 mm thick clear float glass both side,having 12 mm air gap, w including providing EPDM gasket,perforated aluminium spacers,desiccants,sealant(both primiry and secondary sealent) all materials, labours, T&P etc all complete.DSR No-21.1 |
| 66 | Providing and laying 600x600mm vitrified tiles (chapter 14 flooring .DSR 11.41.2 |
| 67 | Granite stone slab 18mm thick mirror polished in wall and steps. DSR 11.56.1 |
| 68 | Providing and fixing flush door shutter ISI marked decorative type 33mm thick including steel but hinged ….completeDSR 9.20.2 |
| 69 | Prviding and fixing ISI marked MS heavy weight butt hinges (125mm) with necessary screw etc all complete. (DSR 9.56.1) |
| 70 | Prviding and fixing ISI marked Oxidised MS sliding door bolts (size 300x16mm) with necessary nut and bolts etc all complete. (DSR 9.62.1) |
| 71 | Prviding and fixing ISI marked Oxidised MS tower bolts (size 250x10mm) with necessary screw etc all complete. (DSR 9.63.1) |
| 72 | Prviding and fixing ISI marked Oxidised MS Handle (size 125mm) with necessary screw etc all complete. (DSR 9.66.1) |
| 73 | Prviding and fixing ISI marked bright finished brass floor door stopper with necessary screw etc all complete. (DSR 9.82.1) |
| 74 | Providing and fixing aluminium die cast body tubular type universal door closer (IS-3564) with necessary acessories and screw etc complete. (DSR 9.83) |
| 75 | Providing and fixingof PVC Roller BLINDS with rod …. Etc. complete M.R. |
| 76 | Providing andInjecting chemical for pre -constructional antitermite treatment worketc.including supply of all materials, labours and T&P etc all complete.DSR 2.35.3.1 |
| 77 | MS or Iron workas truss,built up gates,door frames ,RAILLING,BRACKETS including drilling holes,revetting or welding where nessessary and also including supply of steel ….complete item.DSR-10.25.2 |
| 78 | All pipe outer dia meter midium quality pipe ,weight taken by steel tabel. |
| 79 | 40mm thick 1:2:4 plain cement concrete floor, laid in panels finished with 3mm floating coat of neat cement of cement and marble dust in ration 5:1including all materials, labours, T&P etc all complete.DSR 11.3.1 |
| 80 | SEPTIC TANK |
| 81 | E/W in excavation in foundation in ordinary soil lift upto 1.50 mt……….complete item.DSR 2.8 |
| 82 | Cement Concrete with 4 cm. Gauge approved stone aggregate ,fine sand &cement in proportion of 8:4:1 ……………..complete item. DSR 4.1.8 |
| 83 | Class 150 brickwork in 1:4 cement mortor in Super structure DSR 6.4.1 |
| 84 | R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in Column, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the workAbove plinth level including cost of binding wire.DSR 5.2.2 |
| 85 | Mild steel or ironin plain work such as reinforced cement concrete work wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping and hooks. Dsr 5.22.a.6 |
| 86 | 12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete, DSR 13.4.1 |
| 87 | 40mm thick 1:2:4 plain cement concrete floor, laid in panels finished with 3mm floating coat of neat cement of cement and marble dust in ration 5:1including all materials, labours, T&P etc all complete.DSR 11.3.1 |
| 88 | ProvidingM.S. foot restof 20 x 20 x 10 cmsize of 20mm square barDSR 19.15.1 |
| 89 | Providing & Fixing soil waste and vent pipe 75mm dia sand cast iron S&S pipe . |
| 90 | Providing & Fixingsand cast ironterminal guard75mm dia . |
| 91 | Providing & FixingC.I. Tee at the inlet & outlet of Septic Tank |
| 92 | Providing & Fixing planesand cast ironS&S bend of required degree75 mm |
| 93 | Providing lead chauked jointssand cast ironcentrigugally cast ( spun ) irons pipes & fitting of dia 75 mm |
| 94 | Supply & fixing of medium quality R.C.C. Manhole cover with frame complete . HD-20-Circular shape 560 mm dia |
| 95 | Supply & fixing of medium quality R.C.C. Manhole cover with frame complete . MD-10-Sqaure shape 450 mm dia |
| 96 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter . 1.8 m long complete as per standard design with common burnt clay F.P.S. ( non modular )bricks of class designation 7.5DSR 19.32.1 |
| 97 | SANITARY AND PLUMBING WORK |
| 98 | Providing& fixing one piece construction white vitreous china European Type W.C. panwith 100 mm sand cast P or S trap ,an integaral longitudinal flushing pipe,/PVC. flush pipecutting and making good the wall and floors wherever required. |
| 99 | providing & fixing of wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass single hole mixturewaste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required (550x400mm). |
| 100 | providing & fixing of Stainless ISI 304 Kitchen Sink …….. Complete( AS per DSRItem No. 17.10.2.1 ) |
| 101 | Supply & fixing of beveled edge Mirror of superior glassof approved make and Rectangular shape with 6 mm thick hard board backing.600 x 450 mm ….. Complete( AS per DSRItem No. 17.31 ) |
| 102 | Providing & fixing CP Brass 32 mm size Bottle Trap.. Complete( AS per DSRItem No. 17.22 A ) |
| 103 | Providing & fixing 600x120x5 mm glass self….... Complete( AS per DSRItem No. 17.33 ) |
| 104 | Supply & fixing of15mm diaC.P. Brass StopCock heavy quality (Gem / eqv . ) ….... Complete( AS per DSRItem No. 18.16.2 ) |
| 105 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm |
| 106 | SOIL WASTE & VENT PIPES AND FITTINGS |
| 107 | Providing & fixing 32MM size B class I.S.I. marked G.I. pipe complete with G.I. specials such as bend, tee, socket, cross , clamp etc. ….... Complete( AS per DSRItem No. 18.10.4 ) |
| 108 | Providing& fixingON WALL FACE Unplastified RigidPVC rain water pipe 110 mm diameter. ….... Complete( AS per DSRItem No. 12.41.2 ) |
| 109 | Making Khurra 45x45 cm….... Complete( AS per DSRItem No. 12.22 |
| 110 | Providing& fixing Unplastified RigidPVCpipeClips for110 mm diameter. ….... Complete( AS per DSRItem No. 12.43.2 ) |
| 111 | Providing& fixing the inlet mouth of rain water pipe cast iron grating 15 cm diameter. ….... Complete( AS per DSRItem No. 12.44 ) |
| 112 | WATER SUPPLY PIPES AND FITTINGS |
| 113 | Providing& fixingChlorinated Polyvinyl Chloride ( CPVC ) pipe Exposed on wall 25mm dia nominal outer dia….... Complete( AS per DSRItem No. 18.7.3 ) |
| 114 | Providing& fixingChlorinated Polyvinyl Chloride ( CPVC ) pipe Concealedon wall 15 mm dia nominal outer dia….... Complete( AS per DSRItem No. 18.8.1 ) |
| 115 | Providing& fixingChlorinated Polyvinyl Chloride ( CPVC ) pipe Concealedon wall 20 mm dia nominal outer dia….... Complete( AS per DSRItem No. 18.8.2 ) |
| 116 | Providing& fixing 45 cm long Unplastified PVC Connection pipewith brass union15 mm nominal bore. ….... Complete( AS per DSRItem No. 18.21.2.1 ) |
| 117 | Providing& fixing CP brass bib cock 15 mm nominal bore |
| 118 | Providing& fixing CP brass Long body bib cock15 mm nominal Bore |
| 119 | Providing& fixing CP brass Angle valve for basin mixture and gyser points of 15 mm nominal Bore |
| 120 | Supply & fixing of25mm diagun metal gate valve with C.I. wheel of approved quality. |
| 121 | Supply & fixing of25mm diaBall valveof approved quality. |
| 122 | Providing& Placing on terrace wter storage tank ( AS per DSRItem No. 18.48 ) |
| 123 | ELECTRIFICATION |
| 124 | Point Wiring : |
| 125 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 126 | Group C |
| 127 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 128 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 129 | Submains |
| 130 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 131 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 132 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 133 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 134 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 135 | Supplying and drawingCo axial TV cable, RG-6 grade, 0.7 mm solid copper conductor, shieldedwith fine tinned copper braid and protected with PVCsheathin the existing surface/recessed steel/PVC conduit as required. |
| 136 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 137 | 20 mm |
| 138 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 139 | 5/6 A switch |
| 140 | 3 pin 5/6 A socket outlet |
| 141 | TV antenna socket outlet |
| 142 | Supplying and fixing Telephone socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 143 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 144 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 145 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 146 | 1 or 2 Module (75mmX75mm) |
| 147 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 148 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 149 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 150 | Upto 450 mm sweep |
| 151 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 152 | 2 Pair |
| 153 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. |
| 154 | 1 run of cable |
| 155 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required. (for A.C. Point/MCB Point) |
| 156 | MCB\"s & DB’s : |
| 157 | Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 158 | 6 way (4 + 18), Double door |
| 159 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 160 | Single pole |
| 161 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 162 | Supply and fixing of40 Amp. FP MCB (10 KA) C Curve. CAT A |
| 163 | Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A |
| 164 | ELCB/RCCB Switches : |
| 165 | Supplying and fixing following rating, four pole, (three phase and neutral) SPN, 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 166 | 40 A |
| 167 | 63 A |
| 168 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
| 169 | Earthing Work : |
| 170 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 171 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 172 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 173 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. |
| 174 | 100 mm dia |
| 175 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 176 | Lighting Fixtures (Lights/Fans) : |
| 177 | Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA |
| 178 | Supply and fixing of 3 watt to 6 watt LED(spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror Light) |
| 179 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect CAT. - AAA |
| 180 | Supply and fixing of water tight oblong 10 Watt LEDbulk head luminaire having die cast housing with driver set confirming to IP 65 and above Protection.Complete in all respect. CAT. - AAA |
| 181 | Armoured Cables (Cable/Gland/Lug) : |
| 182 | Supplying and laying ofaluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed bythe Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size |
| 183 | size 95 sq mm x 3-1/2core |
| 184 | Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earthas per direction of engineer-incharge. for cable |
| 185 | size 95 sq mm x 3-1/2core |
| 186 | Supply and fixing ofplain or pin type copper tin plated cable socket (lug) to cable leadsfor pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cable |
| 187 | size 50 sq mm |
| 188 | size 95 sq mm |
| 189 | Supply and Laying of 1800*900*12mm thick chequerd rubber matting of tested quality. complete in all respect. as per I.E. Rules. |
| 190 | Non-Schedule Items |
| 191 | Supply & fixing of 225/300mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. |
| 192 | Supply & Fixing of LAN socket outlet modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. Complete in all respect. |
| 193 | S/F of changeover switch on angle iron frame 100 Amp 4 pole … complete. Sch. No. 378 |
| 194 | Supply and Erection of 100 amp TPN tap off box on rising mains complete with HRC fuses etc. complete in all respect (sch. Nos.. 914) |
| 195 | S/F of 1.5 Tones Window AC with make-LG, Voltas, Videocon |
| 196 | 5% Departmental Charges |
