Repair And Renovation Of Mpc Boards Regional Office And Laboratory, Nagpur Located At 5Th And 6Th Floor, Udyog Bhavan, Nagpur, Mumbai-Maharashtra

TDR : 48752766

Tender Notice
BOQ

Expired

Mumbai , Maharashtra

Tender Brief : Repair And Renovation Of Mpc Boards Regional Office And Laboratory, Nagpur Located At 5Th And 6Th Floor, Udyog Bhavan, Nagpur

Document Fees
₹ 3540 /-

EMD
₹ 316693.0 /-

Tender Value
Refer document

Submission Date
09-05-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Sub Estimate No.1 - Demolition & Civil works
2	Removing doors and windows of any size and type with frame, mild steel/ wrought iron grill work and stacking the same in compound or as Directed.
3	Removing teak wood panelled/ partly glazed or veneer partitions carefully without damaging the frame or panels and stacking the same as and where directed.
4	Removing false ceiling in all types of ceiling i.e. Gypsum, Acoustical, Calcium silicate board, metal etc. including stacking the materials as directed with all leads & lifts.
5	Pulling down burnt brick masonry (in cement mortar) with plaster including sorting out serviceable bricks and stacking the same and debris separately up to a required distance meters or spreading the debris etc. complete.
6	Removing the old cement concrete or any type of tiled flooring including leveling the surface, cleaning the site including sorting out serviceable tiles and stacking the same and debris disposing with all lead and lift.
7	Dismantling old existing electrical works including switch, socket, wire etc with all lift & leads etc. complete as per directed.
8	Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.
9	Removing existing water proofing treatment such as I.P.S./Brick bat coba etc. from terrace/toilet block without damage to structure, leveling and cleaning the surface for providing new specialized water proofing treatment etc complete.
10	Providing and constructing 200mm thick steam cured cellular (aerated) concrete block masonry with steam cured cellular concrete block confirming B.I.S. 6041/6042/6441/ 3809 having density not less than 640 Kg. per Cum. in Cement Mortar 1:6/ Self curing Polymer modified block jointing mortar including adequate plasticizer for non-bearing portion including racking out joints scaffolding & curing etc. complete.
11	Providing and constructing 150mm thick steam cured cellular (aerated) concrete block masonry with steam cured cellular concrete block confirming B.I.S. 6041/6042/6441/ 3809 having density not less than 640 Kg. per Cum. in Cement Mortar 1:6/ Self curing Polymer modified block jointing mortar including adequate plasticizer for non-bearing portion including racking out joints scaffolding & curing etc. complete.
12	Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces in all positions including scaffolding, and curing complete.
13	Providing internal cement plaster 6 mm thick in single coat in cement motar 1:4 without neeru finish to concrete surface in all positions including scaffolding, curing complete.
14	Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortar 1:3 on concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortar 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including all leads, lifts and curing etc. complete (Considering avg. depth of 200 mm)
15	Providing waterproof plaster in Washroom/Pantry areas 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing etc. complete.
16	Chipping the R.C.C. surface and cleaning the rusted reinforcement and exposed surface by wire brush mechanical device or any other established method and applying rust removing solution of approved make and quality with cotton waste swab to reinforcement and allowing to dry the same for 24 hours, brushing of loose particle and applying 1st coat of rust preventive coating of polymer and cement slurry in 1:1.5 proportion with soft brush without adding water including applying another coat of rust preventing after 4 hours allowing Air Curing for 48 hours etc. including scaffolding etc. complete.
17	Providing and applying priming cum bonding coat of polymer of approved make and quality as approved by Engineer-in-charge and cement slurry in 1:1 proportionate by weight to concrete area by brush or any other established method etc. complete.
18	Providing and applying 15 mm thick polymer mortar to load carrying R.C.C member in two layers in proportion of 1:5:15 by weight Polymer of approved quality and make, cement and wash quartz sand with required W.C. ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufactures specification etc. complete.
19	Providing sand face plaster externally to concrete, stone or brick surfaces using approved screened sand including preparing the base, watering and applying base coat of 15 mm thick in cement mortar 1:4 using Supercorn-100 as melamine based super plastizer 1% by weight of cement, krifib synthetic fiber a additions at 125 gm per bag of cement and Sufumex-100D of Krishna Conchem Products or of approved manufacturer i.e. Natural Amorphous microselliceours admixture @ 2% by weight of cement curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment not to exceed 8 mm thickness in cement mortar 1:4 and finishing the surface by taking out grains and curing for 14 days and scaffolding etc. complete.
20	Providing&layingAnti-Skid StoneFinish Vitrified tiles flooring for toilet area of size 600mm X 600mm, approved colour including cutting the required size, laying, jointing and grouting the joints with cement slurry of required colour on bed of 20 mm thick in C.M. 1:4 all labour and materials etc. Complete (Basic Rate 100 / Sqft)
21	Providing&layingDouble Charged PolisedFinish Vitrified tiles flooring for office area of size 800mm X 800mm, approved colour including cutting the required size, laying, jointing and grouting the joints with cement slurry of required colour on bed of 20 mm thick in C.M. 1:4 all labour and materials etc. complete. (Basic Rate 95 / Sqft)
22	Providing&layingchemical registant tiles flooring for lab area of size 600mm X 600mm X 20mm, approved colour including cutting the required size, laying, jointing and grouting the joints with cement slurry of required colour on bed of 20 mm thick in C.M. 1:4 all labour and materials etc. complete. (Basic Rate 175 / Sqft)
23	Providing & fixing in position Vitrified Tile Dado in approved shape, size 600mm X 600mm & colour and pattern in dado truly in plumb up to part or full height of wall with machine cut top edge as per the drawings over cement, sand. backing coat plaster of 15mm / required thickness in CM 1:4 proportion, including fixing with cement paste of required consistency to avoid any possibility of hollowness behind thetiles, filling the joints with white cement and matching color pigments including curing, scaffolding etc. complete as per drawing, specifications and as directed by the Engineer - In - Charge. (Basic Rate 100 / Sqft)
24	Providing & fixing in position Vitrified Tile Dado in approved shape, size 300mm X 600mm & colour and pattern in dado truly in plumb up to part or full height of wall with machine cut top edge as per the drawings over cement, sand. backing coat plaster of 15mm / required thickness in CM 1:4 proportion, including fixing with cement paste of required consistency to avoid any possibility of hollowness behind thetiles, filling the joints with white cement and matching color pigments including curing, scaffolding etc. complete as per drawing, specifications and as directed by the Engineer - In - Charge. (Basic Rate 75 / Sqft)
25	Providing and fixing in position & in stepped manner one side mirror polished machine cut Granite slab Jamblining for Door / Window frames of width upto 300mm of 18mm thickness (+/- 2 mm tolerance) in cement mortar bedding (1:4) of required thickness. Joints, edges to be floated and finished on neat cement of the same colour as the slab. After setting, the slabs (if read) are to be machine polished at site to obtain perfect finish. All exposed edges to be rounded & polished. The rate to include all necessary chipping of brickwork / concrete so that the slab is 12mm projects from plaster / POP surface with rounding of edges, polishing etc. complete as shown on drawing & as per directions of Engineer In charge. Note: No payment will be made for overlapped portion of the jamblining. (Basic Rate 275 / Sqft)
26	Providing and fixing solid Prelaminated 10-12 mm thk wooden flooringmatching to veneer/wood as per the area Design and as directed & Approved by the architect / bank engineer.(Basic Rate of wooden tile - Rs. 150 /- Per Sqft) (area – RO Cabin)
27	Providing and fixing solid wooden skirting of 2nd class, well-seasoned C.P teak wood (wood shall be chemically treated in plant) matching to veneer of size 6\" X 0.75\" as per design with 3coats of silk melamine polish matching to veneer/wood as per the area and as directed by the architect / bank engineer.(area – RO Cabin)
28	Providing and laying carpet tile of the approved make machine tufted textured loop pile , 600x600 mm or 500x500 mm size, 600-700 gms /sq.mtrs,pile thickness min. 8mm, 100% solution dyed nylon, antimicrobial , and of approved make & shadework includesremoving the existing old flooring etc. As directed. The rates shall be inclusive of all taxes, freight charges, fitting, fixing by manufacturers approved adhesive, wastage etc.The payment will be made as per actual measurement .making cut-outs for junction boxes etc. Complete as directed.(Basic Rate of carpettile - Rs. 150 /- Per Sqft)
29	Providing and laying 16mm-18mm thick machine mirror polishedgranite slab of approved colour and approved texturein 1:4 cement mortar bedding of average 25 mm thick in proper line and level including cement slurry and filling the joints with roff/balendura make joint filling compound ofthe same shade of the granite on walls. The rate includes costs of all materials, equipments, labour charges, curing, rubbing, washing, cleaning the surface etc. Complete as per instructions of banks engineer / architect. Etc. Complete.(Basic cost of polished granite slab rs.225/- per sft)(area -passage)
30	Sub Estimate No. 2 - Plumbing Works
31	Providing and fixing chlorinated Poly Vinyl Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 mtr spacing.This includes jointing of pipe
32	Same as above for concealed including cutting, drilling holes in walls/slab etc. and remaking well the demolished portion neatly. (Internal concealedwork) Note: Add 10% in respective rate for concealed piping.
33	15mm nominal OD pipe
34	20mm nominal OD pipe
35	Providing and fixing 15 mm dia Piller cock with guarantee sensor ,against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge. (Basic Rate - Rs. 9000/nos)
36	Providing and fixing European type commode including outlet, inter connections through walls including all fittings etc. complete.As per direction of Engineer - in - Charge. (Basic Rate - Rs. 11900/nos)Toilet
37	Providing and fixing counter top wash hand basin, conforming to IS:2556 (Part IV) 1994 with nickel / chrome plated fittings inlet and outlet connection, nickel plated pillar cock, bottle Trap, down take GI pipes etc complete as per direction of EIC (Basic Rate - Rs. 8000/nos) Toilet
38	Providing and fixing 10 cm cast iron Nahani Trap with fixed cast iron grating, cast iron plug bend and piece of cast iron pipe upto plug bend etc. complete. (Basic Rate - Rs. 1000/nos)
39	Providing and fixing Soap Dispenser with Glass bottle with all types of fixtures including labour charges including transport charges etc. complete. (Basic Rate - Rs. 1600/nos)
40	Providing and fixing 15 mm dia 2 Way BIB cock long body with flange, guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge.(Basic Rate - Rs. 1900/nos) 2 Way Bib Cock
41	Providing and fixing Jet Spray with guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge.(Basic Rate - Rs. 1400/nos)Jet Spray
42	Providing and fixing Flush Valve (Urnial) of approved quality etc complete. As per direction of Engineer - in - Charge. (Basic Rate - Rs. 1200/nos) Flush Valve
43	Providing and Fixing of Mirrors with S.S. Framinf in Toilets of approved Indian quality, copper plated with 10 mm thick plywood backing in the masonry etc. complete.As per direction of Engineer - in - Charge. Mirror Paneling
44	Supplying, Providing and fixing in position of approved make first quality, recessed, roller type or box type white glazed toilet paper holder with flap etc complete as per direction of Engineer - in - charge. (Basic Rate - Rs. 900/nos)
45	Urinal (Flat Back) : Providing & fixing flat back urinal with Sensotronic Sensor Flushing valve for urinal of size 710 x485 x 300 mm of approved quality make & colour conforming to relevant IS latest revision, including outlet & inlet connections, flush walls all necessary fitting, fixtures etc (Basic Rate - Rs. 10000/nos)
46	Providing and laying UPVC pipes of standard make in line and level including necessary labour, bends, tees, fixtures etc. and testing the pipes complete.
47	100 mm diameter
48	75 mm dia
49	50 mm dia
50	Providing and fixing Chromium Plated Alluminium Towel Rail 750 mm (2\"6\") long, 20mm (3/4\") dia and of approved quality fixed on chromium plared bracket including providing teak wood gutties in masonry etc complete as per direction of Engineer - in - charge (Basic Rate - Rs. 1600/nos)
51	Providing and fixing 15 mm dia Angle cock with guarantee against any manufacturing defect including socket, union nuts etc complete as per direction of Engineer - in - charge. (Basic Rate - Rs. 1400/nos)
52	Providing and fixing in position Double coat hooks as per instructions from EIC/Architect (Basic Rate - Rs. 425/nos)
53	Providing and fixing in position Hand dyrer as per instructions from EIC/Architect(Basic Rate - Rs. 8250/nos)
54	Providing and fixing in position Urinal Partition of 12 mm thk toughened frosted glass 3\" x 2\" as per design & instructions from EIC/Architect
55	Providing and fixing in position SS sink for kitchen / pantry as per instructions from EIC/Architect (Basic Rate - Rs. 3300/nos)
56	Providing and fixing 15 mm dia Piller cock for Sink with guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge. (Basic Rate - Rs. 2200/nos)
57	Sub Estimate No. 3 -Painting work1) POP Wall Punning
58	Providing & Applying Plaster of Paris Punning in average 12 to 25mm thickness to walls, ceiling, beams & columns to bring the surface in plumb Line & Level including making the surface smooth, providing required grooves on top of skirting etc. complete as per directions of Engineer - In - Charge.
59	Providing and applying TEXTURED paint of approved colour & shade to old and new surface including scaffolding preparing the surface to finishing with 2 coats etc complete as per direction of Engineer - in charge. (Basic Rate - Rs. 85/ sft)
60	Providing & Applying superior quality of Luster Paint of approved make & shade, using roller to get approved Textured surface in 3 or more coats including preparation of surfaces, applying cement primer of approved make & shade etc. complete as per directions & manufacturer\"s specifications & instructions of Engineer - In - Charge.
61	Providing and applying plastic emulsion paint conforming to IS:5411-1991 part I of superior quality of approved make, colour and shade to the old & new surfaces in two coats over primers, including scaffolding, preparing the surfaces to receive the paint and applying putty etc. complete.
62	Providing and applying washable oilbound distemper in three coats to old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface to receive the paint by brushing and brooming down and applying putty etc. complete.
63	Sub Estimate No. 4 - Carpentry Works 1) Aluminium Frame Work for Partitions /Paneling
64	Providing and fixing in position Aluminium Frame Work of Square hollow sections of given size for partitions, panelling, boxing, soffits etc. with vertical & horizontal members at not more than 600 mm center to center. All complete including necessary additional supports, bracing, runner etc. so that lateral movement is arrested. as per instructions of Architect. Frame work will be measured and paid as per actual measurement on site. Rates quoted shall include the cost of providing and fixing supports up to ceiling. All complete as per detail drawing, as specified and as directed by Architect.
65	Size 50 x 50 x 1.62 mm
66	Size 50 x 25 x 1.62 mm
67	2) SKINNING / PANELING / BOXING /PARTITIONProviding & Fixing in position on new frame work including all materials, labour etc. complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge.
68	a) 9mm thk Marine plywood
69	b) 12 mm thk Marine plywood
70	c) 19 mm thk Marine plywood
71	3)VENEER: 3mm - 4mm thk Providing and fixing 3mm - 4mm thick group matching Decorative Veneer of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cut-out etc. shall be included in the rates quoted. Complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .The item includes finishing the surface with 3 or more coats of melamine polish as per the direction by Architect. (Basic Rate for veneer: Rs.125 per sft.)
72	Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .(Basic Rate for laminate: Rs.55 per sft.)
73	Provifing and fixing full height glazed parition made out of 12mm thick toughned approved make glass as per drawing. The work includes machine edge polish with approved make (ozone/Dorma XL-C/ Enox/ Archis) patch fitting with required hardware complete.( all hardware & patch fittings to be finished with s.s brushed /Antique brass finish).
74	Storage Works Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides,top,bottom shelves made out of 19 mm marine plywood 2)6 mm thk. marine ply backing panels3) Shutters made out of 19 mm thick block board &6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish / PU coating.4) Finish 1mm thk laminate inside &outside as per below mention. 5) hardware such as heavy duty hinges of size 100 x 19 x 25 mm, brass body locks(approved make) with extra-large group key of approved quality, magnetic ball catchers, handles of dia 12mm x 128mm, tower bolt 150mm etc. All exposed woodwork to be finished with 3 coats of melamine polish / PU coating & all internal surface finished with approved 1 mm thk laminate. All as per detailed drgs and instructions of EIC / Architect. Size in front elevation will be measured for payment.
75	Low height storage with laminate finish (LST)
76	Overhead storage laminate finish
77	Full height storage with laminate finish (FST)
78	Low height storage with Veneer finish (LST)
79	Wardrobe finish in veneer as per drawing and direction of EIC.
80	COMPACTOR SYSTEM - Providing, Supplying & Installing of Mobile Storage System consisting of -: 1) 7 Nos. of Mobile Unit Double face each of size Length 3352mm x Width 660mmxHeight2590mm. 2) 1 Nos. of Mobile Units Single face each of size Length 3352mm x Width 457mmxHeight2590mm. 3) 1 Nos. ofFixed Units Single face of size Length 1830mm x Width 457mm x Height 2150mm. The system will be of Knock Down System, Unit will have 5 Nos. adjustable shelves. The unit to have mechanical assisted drive. The whole system should be made of various component each of them should be treated by antirust treatment before applying the approved coloured powder coating. The whole system should be as per the approved drawing and detailed specification mention in the tender document with 12 months Guarantee. The rates coated should be inclusive of all taxes, freight and transportation etc complete as per drawings & direction of Engineer - in - charge.
81	Sub Estimate No. 5 -Doors & Windows Works
82	1) 35mm thk Partly Glazed Partly Solid Door one side veneer & one side Laminate - Providing & fixing door in position Partly Glazed Partly Solid door made up Phenol bonded of 35 mm thk approved flush door of approved size & 08 mm toughened glass approved beading, grooves, approved moulding, lipping patti including necessary hardware, approved adhesive, fitting & fixture Handle, Lock, Floor Spring / Concealed Door Closer etc. melamine polish to all exposed surfaces etc complete as per detail drawing as specified & as directed by Engineer-in charge.
83	2) 35mm thk Flush Door one side veneer & one side Laminate - Providing & fixing 35mm thk. Phenol bonded Flush door finish with one side 1.5 mm thk. Laminate and one side 3 - 4 mm thk Veneer as per approved pattern. All edges should finish with teak wood lipping, moulding with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required.
84	3) 35mm thk Flush Door both side Laminate - Providing & fixing 35mm thk. Phenol bonded Flush door finish with 1.5mm thk. Laminate on both sides as per approved pattern. All edges should finish with teak wood lipping, moulding with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required.
85	4) 35mm thk Flush Door both side VeneerProviding & fixing 35mm thk. Phenol bonded Flush door finish with 3 - 4mm thk. Veneer on both sides as per approved pattern finish with polish. All edges should finish with moulding, teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required.
86	Providing & fixing Service Trap Doors made out of required Aluminium framework, 19mm thk plywood finished with material 1.5 mm thk laminate from outside and 1mm thk laminate from inside with moulding, lipping patti etc required to complete the work. Site modification as per requirement has to be undertaken without any extra cost.
87	Providing and fixing factory made Upvc glazed / wire mesh windows comprising of lead free uPVCmulti-chambered frame, sash and mullion / coupler(wherever required) extruded profile in any shape color and design duly reinforced with galvanized mild steel reinforced , uPVC extruded glazing beads, interlocks and inline sash adaptor(wherever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersank head, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing & direction of Architect/Project In-charge. Section of steel reinforcement and cross sections shall be designed approved by Architect/Project In-charge.
88	Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 10-12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant), UPVC frames and Sliding channel etc. all complete for the required performances etc, as per the direction of Architect/Project In-charge, as per the approved shop drawings, as specified and as directed by the Architect/Project In-charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost) For payment, only the actual area of glass on face of the glass panels provided and fixed in position, shall be measured in sqm. (As per Typical Drawing Attached) of Approved make. Contractor: Warranty Certificate from Glass Processor and original manufacturer shall also be submitted.
89	Providing and fixing aluminium louvered windows consisting of vertical arm (40x12mm) with holders, Rat Jali, lever and locking arrangement weighing at 0.91 Kg/Rmt. with 3mm thick sheet glass louvers including filling the gaps in joints of cladding and external/internal adjoining portion with plaster silicon jelly with gun etc. complete.
90	Providing and fixing mild steel grill work for window, ventilator weighing 15 kg per Sqm. As per drawing including necessary welding and painting with one coat of Red Oxide Zinc Chromate primer and two coat of synthetic enamel paint etc. complete.
91	m.s. frame work of screen
92	Sub Estimate No. 6 - False Ceiling
93	M/F Suspended Plain Ceiling includes Gypserra™ Perimeter Channel {MaterialGI(IS513), YS-260Mpa, Finish- Galvanised 150GSM (IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1(6x40) impact anchor, at 600mm centres. Gypserra™ Ceiling Angle {Material-GI(IS513), YS-260Mpa, Finish Galvanised 150GSM (IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa, Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kn for M30 concrete grade} creating 1220mm x 1220mm grid. Gypserra™ Intermediate channel {Material-GI(IS513), YS-260Mpa, Finish-Galvanised 150GSM(IS277) } is fixed to the Gypserra™ Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish– Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish-ZincCoatingThickness- 4.14micron.}
94	The Gypserra™ Ceiling Section {Material-GI(IS513), YS-260Mpa, Finish-Galvanised 150GSM(IS277)} is then fixed to the Gypserra™ Intermediate Channel {Material-GI(IS513), YS260Mpa, Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC, Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Single layer of 12mm tapered edgeGypboard® Plain (conforming to IS 2095-Part 1:2011, Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape. Serrated section has effective thickness of 2T ( 2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as compared to plain steel section. All Gypserra™ metal components are patent applied for. 12 mm thk Gypsum Ceiling
95	Acoustical false ceiling area- Providing & Fixing of Approved Mineral Fibre Acoustical Suspended Ceiling System with (Micro look) Edge Tiles With Approved15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 66% GW & 74% RW%. The tile shall be laid on Approved profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2.Silhouette, Main Runners & Cross Tees to have mitred ends & “birds mouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 & passed through 500 hrs of Salt test. The Tile & Grid system used together should carry a 15 year warranty. (Contractor should submit a performance certificate from Approved Manufacturers)
96	12 mm thk moisture resistance boardM/F Suspended MR Ceiling includes Gypserra™ Perimeter Channel {MaterialGI(IS513),YS-260Mpa,Finish- Galvanised 150 GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres.Gypserra™ Ceiling Angle {MaterialGI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit CleatandGyproc®RawlPlug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid.Gypserra™ Intermediate channel {Material-GI(IS513),YS-260Mpa,FinishGalvanised 150GSM(IS277) } is fixed to the Gypserra™ Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {MaterialCarbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.}
97	TheGypserra™CeilingSection {Material-GI(IS513),YS-260Mpa,FinishGalvanised 150GSM(IS277)} is then fixed to the Gypserra™ Intermediate Channel {Material-GI(IS513),YS- 260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material- wire(BS970Gr.En42)-46-48HRC,FinishZinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Single layer of 12.5mm tapered edge Gyproc® MR (conforming to IS 2095 Part 1:2011/ EN 520:2004, Type-A & H1/ASTM C1396) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape.Serrated section has effective thickness of 2T (2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as compared to plain steel section. All Gypserra™ metal components are patent applied for .
98	Providing and fixing Wooden rafter (2”X4”) at all height including providing and fixing of aluminium frame work and rafter made up of ply using19 mm finish with laminate as per requirement with complete hardware fitting etc complete as per direction of Engineer - in – charge (Basic Rate - Rs. 300/ Rft)
99	Providing and fixing Wooden ceiling finish with veneer at all height including providing and fixing of aluminium frame work and rafter made up of ply using 12 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge
100	Sub Estimate No. 7 - Loose Furniture
101	RO Cabin Table Finished with Veneer in table size 2500 mm x 1200 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm)
102	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be veneer with PU Coat. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Approved make Foot rest shall be provided, all molding shall be finish in PU Coat. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
103	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved veneer in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved veneer.
104	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved veneer from outside &from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With veneer of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
105	Cabin Table Finished with corian top in table size 1800 mm x 900 mm x 750 mm) side table (size 1000 mm x 450 mm x 750 mm)
106	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
107	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate.
108	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
109	officer Table Finished with Core Laminate top in table size 1500 mm x 750 mm x 750 mm) side table (size 1000 mm x 450 mm x 750 mm)
110	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
111	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate.
112	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
113	Staff Table Finished with Core Laminate top in table size 1350 mm x 750 mm x 750 mm) side table (size 1000 mm x 450 mm x 750 mm)
114	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
115	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate.
116	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
117	receptionTable Finished with Corian top in table size 1500 mm x 750 mm x 750 mm)
118	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
119	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate.
120	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
121	securityTable Finished with Core Laminate top in table size 1500 mm x 750 mm x 750 mm)
122	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
123	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate.
124	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
125	sample receivingTable Finished with Core Laminate top in table size 2400 mm x 750 mm x 750 mm) side table (size 1650 mm x 450 mm x 750 mm)
126	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
127	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate.
128	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
129	Conference table (Size 9000 x 2100 x 750mm)
130	Providing and fixing in position Conference Room Table of approved shape shown in drawing. Table top made out of 19 X 19 mm & 50 X 38 mm T.W. frame work with both side 6mm thk marine plywood in two layers finished with approved veneer with polycoat finish. Apron made out of 50 X 50 mm T.W. frame work with both side 9 mm thk marine plywood finished with approved laminate. Edge of Table finished with 50 X 50 mm T.W. moulding with melamine polish. Footrest & skirting made out of 19 mm thk marine plywood finished with approved veneer with polycoat finish. Edge of footrest finished with 25 mm thk wooden half round moulding with melamine polish. 50 x 50 mm wooden connecting members.
131	Rate including cost of wooden beadings, mouldings, inlays, etc. Top should be finished with approved laminate. Sides finished with approved laminate, complete as per detail drawing, as specified and as directed by Architect.
132	securityTable Finished with Core Laminate top in table size 900 mm x 600 mm x 750 mm)
133	Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc.
134	drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate.
135	Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.
136	Sub Estimate No. 8 - Chairs Works
137	Executive ChairProviding and placing in required position Very High Back Chair of size (49.0cm. (W) X 48.0cm. (D) With 75.o cm (D) including necessary approved type and colour fabric complete as per manufacturer specifications and as per instruction of Engineer in charge. (Basic Rate- 25000/ nos)
138	Executive Visitor ChairProviding and placing in required position Mid Back Chair of size size 50.0cm W X 49.5cm (H) with 75.o cm (D) including necessary approved type and colour fabric complete as per manufacturer specifications and as per instruction of Engineer in charge. (Basic Rate- 17000/ nos)
139	Conference room chairProviding and placing in required position Mid Back Chair of size 50.0cm W X 49.5cmH with 75.o cm D including necessary approved type and colour fabric etc complete as per manufacturer specifications and as per instruction of Engineer in charge. (Basic Rate- 20000/ nos)
140	Conference room chair Providing and placing in required position Low Back Chair without casteor of size 50.0cm W X 49.5cmH with 75.o cm D including necessary approved type and rcolour fabric etc complete as per manufacturer specifications and as per instruction of Engineer in charge. (Basic Rate- 12000/ nos)
141	Staff Chair Providing and placing in required position Mid Back chair the seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area.BACK SIZE:47.5 cm. x 58.0cmHSEAT SIZE:47.0 cm. W x 48.0cm.D (Basic Rate- 10000/ nos)
142	Staff visitor chair Providing and placing in required position Visitor Low Back Chair, the seat and back are made up of 1.2 cm. thick hotpressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm. (W) x 58.0cm. (H)SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D with the Polyurethane foam is moulded with density = 45 +/-2 kg/m3and Hardness = 20 +/- 2 on Hampden machine at 25% compression. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% Glass Filled black Nylon.complete as per manufacturer specifications and as per instruction of Engineer in charge.(Basic Rate- 7000/ nos)
143	Dining chair(Basic Rate- 5000/ nos) Without Armrest light and portable chair, and can be stacked one atop another, with poly-propylene edging is injection-moulded in situ.
144	Dining stool(Basic Rate- 7000/ nos)Multipurpose stool with a cushioned seat and a manual height adjustment feature that canbe easily locked at any position with an ergonomic and cushioned backrest to aid prolonged sitting & with a revolving stool base
145	Dining table(Basic Rate- 18000/ nos) Stackable in PU- coated top (with powder-coated understructure) and membrane top (with Stainless steel understructure) in four seater configuration.
146	Providing & supplying multi seated sofas with teakwood internal frame out of size min. 70x40mm as mentioned in drawing with necessary spring / rubberized coir/32 density polyurethane foam/100% latex rubber foam of appropriate quality & thickness as shown in the drawing with melamine polish on all exposed wooden surface. 75mm thk. for seat & 50mm thk for back. 25mm polyurethane in it to give required shape. The rate to include upholstery material of approved velvet (fabric) on outer side & on the inner side white cloth of approved quality shade etc. The contractor shall use appropriate size of frame work instead of mentioned to achieve desired shape & comfort as shown. All as per instructions of Engineer-in charge.
147	a) Single Seated Sofa (Basic Rate- 18000)
148	b) Three Seated Sofa (Basic Rate- 42000)
149	c) Two Seated Sofa (Basic Rate- 30000)
150	Sub Estimate No. 9 - Miscellaneous work
151	L - shape PELMETS / Jamblining : (upto 300 mm wide)Supplying, Providing & fixing in position of required size pelmets / jamblining made out of 19mm thick marine plywood finished with approved finish mention below and 1mm thk laminate finish for inside surface as per the direction by Architect. Item to be completed in all respect as per the drawing & instruction from Architect.
152	1.5 mm thk Laminate Finish
153	Veneer Finish
154	Soffit:
155	Providing and fixing in position 19mm thk. Marine plywood for soffit finished with below mention including 25 x 25mm thk 2nd class TW wooden frame work (including paint)/ supports & mouldings, lipping patti, groove. Item to be completed in all respects as per drawings & direction by Architect.
156	Laminate Finish
157	Veneer Finish
158	Soft board:
159	Providing and fixing in position 12mm thk soft board panelling with approved adhesive, partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect.(Basic Cost of Fabric- 250/ Rmt)
160	Dust Bin (350mm Dia)
161	Providing & arranging in position S.S. dust bins out of perforated (min Size 350 mm dia x 400 mm Height). Item to complete in all respect as per drg & directions.
162	Roller blinds (Black out)
163	Providing and fixing BLACKOUT Fabric with composite material of High Tenacity Polyester Yarn Fabric with PVC Coating & Fungistatic Treatment of Hunter Douglas, B99 Serge Ferrari, MAP, Softlite Impex, Mado approved makemanual Roller blinds with end brackets, components, bottom bar & fabric with manual operation and warranty of minimum 5 years and Green guard
164	Certificate – UL 2818 Gold Certification as per specifications. Fabric to be as per approved sample. Manual system to include chain ball operation.Composition: 39% Polyester / 61% PVC,Weight: 540 g/m2 (+/-5%),as per Fungistatic Treatment: Degree 0, Excellent (EN ISO 846-A)Fire Retardancy:B1/DIN 4102-1,METHOD 2/NFPA701,EuroCLASSB- s2,d0,Reflection solar radiation: 25% to 69%, Solar Absorption: 28%-31%,Solar Transmission-0%,Tensile Strength (Wrap/Weft)-160/170 daN / 5cm,Quality Management 1SO9001. All complete as per approval of designer & instruction of Engineer-in-charge. (Basic Cost :- Rs. 1750 / smt)
165	Wall Paper
166	Providing, fixing, applying by Company Trained Technicians, premium Wall Covering (WallFabric), as per details in attached specifications, or as per detailed specifications and colours attached, or approved equivalent, of approved colour, texture and design, including base and sub-base preparation(on top of existing P.O.P surface), all complete, in a neat and workman like manner, as per directions of Engineer-In-Charge. (Basic Cost :- Rs. 1150 / smt)
167	Providing & fixing Artifact like Artificial Plant, Picture Frame etc. as per shown in drawing & manufacturers specification
168	a) Picture Frame (Basic Cost :- Rs. 5000 / Nos.)
169	b) Planters (Basic Cost :- Rs. 10000 / Nos.)
170	T.W MOULDING Providing and fixing in position mouldings out of T.W Moulding complete as per profile given in the detail drawing or as explained out of wooden sections of sizes given below. All should be finished with melamine polish of approved shade & color with minimum 3 coats. This item will operate only for those mouldings which are to be fixed independent of any other item as mentioned in the Bill of Quantities and not measured under any other item etc. complete as per detail drawing, as specified and as directed by Architect / Engineer
171	SIZE 15 X 15 MM
172	SIZE 25 X 50 MM
173	SIZE 50 X 50 MM
174	Wooden Facia Providing & fixing Wooden facia made out of 19mm thk marine plywood and finished with decorative veneer / Laminate and melamine polish wtc complete as per drawing and direction of Engineer – in - charge.
175	100mm x 75 mm
176	150 mm x 25 mm
177	Roller blinds
178	Providing and fixing composite material of High Tenacity Polyester Yarn Fabric with PVC Coating, Aluminium Backing, & Fungistatic Treatment of approved makemanual Roller blinds with end brackets, components, bottom bar & fabric with manual operation and warranty of minimum 5 years and Green guard
179	Certificate – UL 2818 Gold Certification as per specifications. Fabric to be as per approved sample. manual system to include chain ball operation.Composition: 39% Polyester / 61% PVC with Aluminium Backing,Weight: 290 g/m2 (+/-5%) as per Fungistatic Treatment: Degree 0, Excellent (EN ISO 846-A)Fire Retardancy:B-s2,d0/EN 13501-1, CLASS A/ASTM E84., Color: as per selected color Openness factor: 3%, Reflection solar radiation: 9% TO 65%, Light transmission: 2%-4%,Solar Absorption : 22% - 88%,Solar Transmission-3% -13%,Tensile Strength (Wrap/Weft)-160/170 daN / 5cm.All complete as per approval of designer & instruction of Engineer-in-charge. (Basic Cost :- Rs. 1350 /smt.)
180	SIGNAGES
181	SIZE 2.5\" X 5\"
182	SIZE 4\" X 12\"
183	SIZE 4\" X 8\"
184	SIZE 4\" X 15\"
185	FIRE EXIT STICKERS
186	Providing and laying in place synthetic door mats as per approved sample
187	Size -1800X600
188	Size -900 X 450
189	Sub Estimate No. 10 - Electrical Works
190	Metering
191	Supplyinganderectingstaticenergymeter440 V50 Hz. 400A ISImarkmeter AC 3 phase 4 wires LCD/LED display complete erected on polishedteak wood board duly wiredwith requiredsize of weatherproof PVC wires duly tested for class II accuracy by electric supply company.
192	Supplying and erecting calcium silicate 15/16 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete.
193	Distribution Board
194	Supplyinganderectingtriplepole and neutral distribution board (TPNDB) surface/ flushmounted suitable for SPMCB of 24 ways on iron / GI frame (horizontal busbar type)as per specification no.SW-SWR/MCBD.
195	Supplyinganderectingtriplepole and neutral distribution board (TPNDB) surface/ flushmounted suitable for SPMCB of 36 ways on iron /GI frame (horizontal busbar type)as per specification no. SW-SWR/MCBDB
196	Supplyingand erecting single pole and neutral distributionboard (SPNDB) with door surface/flush mounted with 2 waysfor incoming and 6 ways for outgoing SP MCB’son iron/ GI frame as per specification no. SW-SWR/MCBDB
197	Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SWRCCB/RCCB
198	Supplying, fixing and commissioning 2 pole,RCBO (residual current breaker with overcurrentshort circuit 10 kA and earth leakage protection),with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, as per specification no SWRCCB/RCBO
199	Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
200	Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SWSWR/MCB
201	Supplying, fixing and commissioning4 pole RCBO ( (residual current breaker with overcurrentshort circuit 10 kA and earth leakage protection),with 30/100/300 mA sensitivity and having capacity of 63Aas per specification no SWRCCB/RCBO
202	LT Cables
203	Supplying, erecting & terminatingXLPE armoured cable 3½ core50 sq. mm. aluminium conductor withcontinuous5.48 sq. mm.(12 SWG) G.I. earth wire completeerected with glands & lugs, onwall/ trusses/pole or laid in provided trench/ pipeas perspecification no.CBLT/AL
204	Supplying, erecting & terminatingXLPE armoured cable 3½ core 25 sq. mm. aluminium conductor withcontinuous5.48 sq. mm. (12 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CBLT/AL
205	Supplying, erecting & terminatingXLPE armoured cable 3½ core 210 sq. mm. aluminium conductor withcontinuous5.48 sq. mm.(12 SWG) G.I. earth wire completeerected with glands & lugs, onwall/ trusses/pole or laid in provided trench/ pipeas perspecification no.CBLT/AL
206	Supplying, erecting & terminatingXLPE armoured cable 4 core4 sq. mm. aluminium conductor withcontinuous5.48 sq. mm. (12SWG) G.I. earth wire completeerected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipeas per specification no.CBLT/AL
207	Supplying, erecting& terminating XLPE unarmoured cable 1 core 25 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no.CB-LT/CU
208	Supply and making terminal joints for the following sizes of 1.1KV grade XLPEInsulated armoured/UnarmouredAluminium/ Copper conductor cables including providing heavy duty tinned coper terminal lugs, crimping type, insulation tape, heavy duty single compression type brass glands effecting terminal connection to the equipment/Panel complete as required as per final direction and approval of the Owner/Consultant.
209	3.5 Core x 210 sq.mm., XLPE InsulatedAluminium Conductor Armoured Cable
210	3.5 Core x 50 sq.mm., XLPE InsulatedAluminium Conductor Armoured Cable
211	3.5 Core x 25 sq.mm., XLPE InsulatedAluminium Conductor Armoured Cable
212	4 Core x 4 sq.mm., XLPE Insulated copper Conductor Armoured Cable
213	1 Core x 25 sq.mm., XLPE Insulated copper Conductor Flexible Cable
214	Cable TrayProviding & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheets of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
215	Mains in PVC Conduit (WG-MA/PC)
216	Supplying & erecting mains with 2x1.5 sq.mm. and earth wire 1.5 sq.mmFRLSH PVC copper wire, in HMS PVC conduit min. 20mm dia as per specification No: WG-MA/PC.
217	Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mmFRLSH PVC copper wire in HMS PVC conduit min. 20mm dia. as per specification No: WG-MA/PC.
218	Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mmFRLSH PVC copper wirein HMS PVC conduit min. 20mm dia, as per specification No: WG-MA/PC.
219	Supplying & erecting mains with 2x6 sq.mm. and earth wire 4 sq.mmFRLSH PVC copper wire, in HMS PVC conduit min.20mm dia, as per specification No: WG-MA/PC.
220	Bunch of Wires (WG-MA/BW)
221	Supplying & erecting mains with 2x1.5 sq.mm FRLSHcopper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW
222	Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/BW
223	Point Wiring (WG-PW)
224	Point wiring for light/fan/bell in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and requiredaccessories as per specification No: WG-PW/SW
225	Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW
226	Modular switches and Accessories
227	Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
228	Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.
229	Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.
230	Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
231	Supplying and erecting ISI mark modular type T.V. sockesingle outlet, duly erected on provided plate and box witwiring connections complete.
232	Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.
233	Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.
234	Supplying and erecting unbreakable concealed typemodular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..
235	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
236	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
237	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
238	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
239	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
240	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
241	CEILING FANS & EXHAUST FANS
242	Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FGFN/CF
243	Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.
244	Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.
245	Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
246	Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.
247	Under floor racewaySupplying and embeddingof following sizes of underfloor trunking made out of 1.6 mm thick Hot Dip Galvanised Steel sheet havingbelow mentioned compartments including Jointing sleeves, floor fixing supports, chipping and levelling that portion of the floor etcin the floor / in recess etc as per specifications complete as required.
248	50mm x 38mm
249	75mm x 38mm
250	100mm x 38mm
251	150mm x 38mm
252	225mm x 38mm
253	300mm x 38mm
254	Supplying and fixing of following sizes of under floor junction boxes made out of 2 mm thick pre-galvnaized sheet steel, top cover with 2.5 mm thick pre-galvanized steel plate alongwith changeover fly-overs including chipping and levelling that portion of the floor etc as per specifications complete as required.
255	150mm x 150mm x 65-90mm
256	225mm x 225mm x 65-90mm
257	300mm x 300mm x 65-90mm
258	400mm x 400mm x 65-90mm
259	Data & Telephone Networking
260	Supplying, erecting & commissioning junction box suitable for 50 pairs as per specification No. WG-TW
261	Supplying & installing UTP networking cat-6 cable suitable forLAN / WAN Computer net-working as per specification No. WG-COC/NC
262	Supply , Installation, Testing and Commissioning of jack panel MAKE : D-LINK 24-Port for network system .
263	Cat 6 Patch cord factory crimped molded (2m) (D-Link make)
264	Cat 6 Patch cord factory crimped molded (1m) (D-Link make)
265	Cat 6 data cable of D-Link make
266	Supply , Installation, Testing and Commissioning of Switch MAKE : D-LINK 24-PortSwitch for network system .
267	Net work cum server rack 42 U aluminum profiled with all accessories
268	Supply , Installation, Testing and Commissioning of wire manager for network system .
269	Supply , Installation, Testing and Commissioning of Switch MAKE : D-LINK / TP LINK 8-Port Gigabit Switch for wifi router .
270	Supply , Installation, Testing and Commissioning of MAKE : D-LINK / TP LINK ACCESS WIFI Router for wifi.
271	LIGHT FITTINGS
272	Supplying and erectingLED square / circular 15 / 18W down lighter having pressure die-cast aluminium housing,opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.
273	Supplying and erecting 2\"X 2\" square shaped CRCA /diecast aluminium powder coatedhousing LED panel (slim edge-lit) light suitable for 36W with provision for plane front frame with translucent cover fixed to the housing complete.
274	Supplying and erecting LED Mirror Light with integrated driver including 14W to 18W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete.
275	Supplying & erecting Recessed LED 25W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.
276	Supplying & erecting Surface LED 20W tube light fitting (2 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.
277	Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.
278	Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete.
279	Supplying and erecting 3 Watts LED Eyeball type Light to highlight paintings. LED-3W-38 degree Beam angle-110 Lumens -700mA
280	Supplying and erecting 12 Watts LED Bracket Light to highlight paintings.
281	Supplying and erecting LED Circular suspended Light fully diffused Luminiare complete. (basic rate: - Rs. 10000)
282	Supplying and erecting LED Circular suspended Light fully diffused Luminiare complete. (basic rate: - Rs. 12000)
283	Supplying and erecting decorative wall mounted bracket Aluminium body & arm anodised / powder coated with decorative glass shade fixed on wall.
284	Supplying & erecting ceiling suspended lineaer LED 36W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.
285	Supplying & erecting ceiling suspended Circular LED fitting . (basic rate: - Rs. 12000)
286	Supply,Installation& Testing of Occupancysensors for Cabins.
287	Supply, Installation & Testing of Motion sensors for washroom and allied areas PIR occupany sensor.
288	LED PROFILE LIGHT
289	Chandeliers (basic rate: - Rs. 12000)
290	Earthing
291	Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameterLow Carbon Steel with 250 micronmolecular copper bonded earthing rod ofLength 3malong with 25 kg Carbonbased environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI
292	Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copperclampsfixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.
293	Supplying and erecting GI stripof required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint in an approved manner with joints required. As per specification NoEA-EP.
294	Supplying and erecting G. I. Earth Wireof high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.
295	Electrical Panels -General Specification for Power Panels
296	i)The Electrical panels should be procured from Central Power Research Institute(CPRI) approvedPanel manufacturer.
297	ii)All the Electrical panels shall be subjected to Megger tests and HV tests at site in the presence of Client/ Consltant as per the requirement of Client/Consultant.
298	iii)The Contractor should submit 3 sets of as built drawings of the Electrical panels.
299	iv)The Electrical panel\"s feeders should be properly labelled using engraved black anodized labels.Also, night glow radium labels shall be provided for each feeder specifying the name of the load.
300	v) The detailed specifications missing in the BoQ should be followed from the Specifications and Electical Single line diagram in ACAD format.
301	vi) Contractor should submit the fabrication drawing, single line diagram and control logic system to Consultant/Client for approval before fabrication of all panels.
302	vii) The Electrical panel\"s main body, doors, partitions should be fabricated out of 2mm thick MS steel sheet.
303	vii) Appropriate size knock out holes should be provided in the panels as per the size of the incoming and outgoing cables.
304	viii)TransientVoltageSurge Suppressor (TVSS) should be installed in all the electrical panels.
305	Design as per technical specifications and obtainapprovalofdrawings,priorto manufacturing, manufacture,insure,pack with PVCsheets,transport to site, store,erect in proper position,testing and commissioningof Indoor Duty and having IP 52 Rating LT panel cubicle and extendible type front and back operated having Top/Bottom Bus-Bars and Top/bottom Cable/Bus Ductentry,& fabricated using 14 gauge,CRCA sheetsteelformainframe,doorand partitions,dustandvermin proof lockable doors and carrying the control wiring using approved make FRLS colour coded Wires of minimum 2.5 sq.mm and using approved make push on terminals.The panel shall bewall mounting type, all completewith interconnections by using electrolytic grade tinned copper Bus Bars of 99.95% purity for all the other panels, colourcoded heat shrinkable PVC sleeves.
306	MCCB. 400 A and above MCCB shall have Micro processor release with overload,short circuit,Earth fault and Neutral protection with faultrating of appropriate KA.Below 400 A MCCB shall have Thermo magnetic release with overcurrent and short circuit protection with fault rating of appropriate KA.Three/Four Pole Moulded Case Circuit Breaker withbuilt inover current and short circuit TheMCCB shall be suitablefor 415 Volts 50 Hz., ACsupply
307	BUSBARUniformly rated, continuous duty,415VAC,3Phaseand100% fully rated Neutral electrolyticgrade 99.95%Purity tinned Copperwith colour coded heat sink sleeves supported onSMC type grip supports. The Horizontal / Vertical sections of the busbars should all be uniformly rated for specified current rating.
308	All panelsshallbeCubicle type with front operated and cable end boxes at the rear complete factory wired and tested in Cubicle type design withpowdercoated and paint process as per technical specifications and the pnale board fabricated as per technical specificationsall completeand as per finaldirectionand final approval of theConsultant/ Owners.
309	LT Panel-1 Incomer
310	Providing & erecting 4 Pole MCCB upto 400A, 415V,with short circuitrating 50 kA (Ics=100% of Icu ),adjustablethermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frameas per specification no.SW-SWR/MCCB
311	Supplying&erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on providedbox / panel with necessary material, wiring & connections etc.
312	Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB
313	Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB
314	Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB
315	Supplying&erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on providedbox / panel with necessary material, wiring & connections etc.
316	Supplying and erecting 5 kVAr, 440 V 3 phase, 50 Hz., thyrister switched micro APFC passive filter panel, consisting of suitable steps of APP type capacitor units with harmonic filter reactors, as per specification no CP-ED/APFC
317	Supplying and erectingGI sheet 1.25 mm (18 SWG)tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.
318	Supplying and erecting GI sheet 1.6 mm (16 SWG)tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red lead paint and 2 coats of enamel paint.
319	Supplying and erecting bus bar chamber triple pole with neutral with four copper bars, 500V, 400A complete as per specification no. CPBB
320	UPS O/P PANEL FOR 2 NOS 08 KVA UPS
321	Incomer: - 1Nos 125Amps 4 Pole MCCB.
322	Outgoing:
323	4 Nos 63Amps 4 Pole MCB with interconection, Digital parameter etc.
324	3 Nos - 150/5, Class-1, 15 VA CTs
325	1 No. Load Manager for various parameteres
326	3 Nos ndicating Lamps - LED type
327	6 Nos - Control Fuses
328	1 No. 150/5, Class - 1, 15 VA
329	SLD with GA drawings shall be submitted by the contractor for prior approval by
330	the consultant before fabrication.
331	LT Panel-2
332	Incomer
333	Providing & erecting 4 Pole MCCB upto 400A, 415V,with short circuitrating 50 kA (Ics=100% of Icu ),adjustablethermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frameas per specification no.SW-SWR/MCCB
334	Supplying&erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on providedbox / panel with necessary material, wiring & connections etc.
335	Outgoing
336	Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB
337	Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB
338	Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB
339	Supplying&erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on providedbox / panel with necessary material, wiring & connections etc.
340	Supplying and erecting 5 kVAr, 440 V 3 phase, 50 Hz., thyrister switched micro APFC passive filter panel, consisting of suitable steps of APP type capacitor units with harmonic filter reactors, as per specification no CP-ED/APFC
341	Supplying and erectingGI sheet 1.25 mm (18 SWG)tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.
342	Supplying and erecting GI sheet 1.6 mm (16 SWG)tobe used for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red lead paint and 2 coats of enamel paint.
343	Supplying and erecting bus bar chamber triple pole with neutral with four copper bars, 500V, 100A complete as per specification no. CPBB
344	Uninterrupted Power Supply
345	Supplying & erecting on line UPS pure sine wave of 8 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS
346	INTELLIGENTADDRESSABLE FIRE ALARM SYSTEM
347	Supply, fixing, testing, commissioning of Addressable Four zone Fire Alarm Panel, for below refered devices , LCD Display, Voice evacuation facility,Battery Charger & Battery Backup for 8 Hrs as per spec`s. with battery charger complete, asspecified in
348	Supplying, installing, testingand commissioning heat detector complete on box asper specification no. FF-FAS/HD
349	Supplying, installing, testingand commissioningoptical type smoke detector complete on box asper specification no. FFFAS/SD
350	Supplying, installing, testing and commissioning manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP
351	Supplying, installing, testing and commissioning hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR
352	Supplying,installing,testing and commissioning remote response indicators complete asper specification no. FF-FAAS/RRI
353	Supplying, installing, testingand commissioning FR, XLPE armouredcable 2 core1.5 sq.mm. copper conductorcomplete erected on wall/ ceiling complete asper specification no. CBLT/CU
354	Demolishing, resifting, installing, testing and commissioning the existing firefighting system with all necessary required material and accessories to complete the work as per the drawing and direction of Architect / PMC / Client for 5th & 6th Floor.
355	Dry Chemical Power (ABC) Type fix Extenguisher of 6Kg capacity having B.I.S. certificate mark
356	compressed CO2 gas Type fix Extenguisher of 4.5Kg capacity having B.I.S. certificate mark
357	CCTVSYSTEM-Supply & Installation CCTV system comprising of following:
358	Supply, Installation, Testing and Commissioning of Network Video Recorder having Minimum 16 Channel Input and 1 SATA support up 8 TB by each SATA slot.Resolution : Minimum 1920*1080, Audio Output : Yes with latest Ports
359	supply,installation , testing& commissioning of cctv cameras 2.0 MP IR dome camera with required accessories , 1/2.7 \" 2MP CMOS sensor , H. 264/H.265HP /MP/BP/M-JPEG Encoding , triple stream , upto 1920 x 1080 HIGH Resolution , IR LEDs : 20M -40M.
360	Supply , Installation, Testing and Commissioning of 6U rack for wall mounting cctv.
361	Supply , Installation, Testing and Commissioning of Switch MAKE : D-LINK 24-Port Gigabit Switch
362	Supply , Installation, Testing and Commissioning of HDMI CABLES - 25 MTRS LENGTH
363	Supply & laying of cat -6 wire in 25mm PVC conduit.
364	43\" Colour LED android smart TV for above workstations
365	RG-6 coxial cable for Video conferencing
366	RG-6 coxial adoptor with splitter
367	RODENT REPELLANT SYSTEM
368	Main Rodent Controller with (QR) LED Display, suitable to connect maximum 12 Satelites @ 300 sq.ft each,networkable on RS 485 with facility to integrate with GUI Software for entire reporting capabilities or BMS Coonectivity for Server room.Safety Compliance as per IRPA (International Radiation Protection Association)
369	SITC of Transducer Satellite Stations capable of Emitting Ultrasonic sound of frequencies 20 Khz and higher, with blinking LED Indication & shall capable to covering area of minimum 300 Sq ft in all voids.
370	FRPVC - 20 mm Medium Grade Conduits with following Cables,fittings ISI Marked:
371	2C x 14/40 SWG Copper Cable in above conduit
372	Public Address System
373	Supply & commissioning of 6 Watts Ceiling/ Wall Mounted Voice Evacuation Speaker having power taps upto 2W and frequency response of 400 to 4000Hz for Voice Evacuation and as per attached specifications complete etc. as required
374	Supply & installation of Main control panel Bosch (Plena Amplifier) with 6 zone & 240 W inbuilt amplifier with BGM Provision.
375	Providing, fixing, testing & commissioning Microphone & zone selection Keypad for 6 zones, connection from Main controller to Announcement consol maximum 100 metre Cat-6 Cable Bosch (in Administration Area)
376	Providing, fixing, testing & commissioning Call Station Key Pad with connections & all accessories.
377	Providing & laying of armoured 2C x 0.75 sqmm Cu. Cable with required fixing arrangements etc.
378	ACCESS CONTROL
379	Supply , Installation, Testing and Commissioning of eSSL multi - Biometric time Attendence & Access control system with facial recongnition , RFID , fingerprint , ip65 dust & waterproof rating .
380	ACCESS CONTROL - ELECTROMAGNETIC LOCK Supply, Installation, Testing and Commissioning of EM LOCK with all required accessories on define Door, 12V capacity, Electromagnetic mechanism for interlocking with all required Components.
381	Sub Estimate No. 11 - HVAC Works
382	Supply of Variable Refrigerant Flow system Airconditioners - R-410 (Mitsubshi / Ogeneral/ daikin)
383	Supply of Outdoor Units- Supplying, erecting, testing and commissioning VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.
384	a) 10 HP Side Discharge
385	b) 12 HP Side Discharge
386	c) 14 HP Side Discharge
387	d) 18 HP Side Discharge
388	Supply of Indoor Units - Supply,installation,testingand commissioning of VRF/VRV based ceiling suspended 1Way / 4 Way cassette indor unit (IDU) compact / standard size, having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.
389	a) 1.0 TR One Way Cassette Unit
390	b) 1.3 TR One Way Cassette Unit
391	c) 1.3 TR Four Way Cassette Unit
392	d) 2.0 TR Four Way Cassette Unit
393	e) 2.5 TR Four Way Cassette Unit
394	f) 3.0 TR Four Way Cassette Unit
395	SUPPLY OF EXHAUST UNITS
396	500CFM
397	700CFM
398	2000CFM
399	2600CFM
400	Decorative Panel For Ceiling Cassettes with receiver Kit
401	Miscellaneous Item
402	Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
403	Drain U-PVC Pipe Fully Insulated with 9 mm rubber nitrile insulation (Include core cutting, tray and any item to complete the work)
404	25mm
405	32mm
406	40mm
407	Control Cabling Supply and installation of control cabling with UPVC conduit from indoor units to outdoor units etc complete with the direction of EIC
408	4c x 16 sqmm (Supply, Installation & Testing of Power Cabling from Local isolator to OD Unit)
409	3c x 1.5 sqmm(Supply, Installation & Testing of Power Cabling from Local isolator/ switch socket to indoor unit including supply & fixing of plug top if required to match the receptacleprovided)
410	3c x 1.0 sqmm shielded cable. (Supply, Installation & Testing of Communication cable Between Indoor and Outdoor Unit.)
411	Exhaust Fan Installation
412	Supplying and installation of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system. (For IDU & ODU)
413	Supplying and erecting circular flexible / rigid PVC pipe duct of size 150 mm dia, 4 mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc with sealing complete with provided control/ air flow regulating valves / dampers, filters at position.
414	Supply, fabrication, installation an testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete.
415	Supplying, erecting, testing and commissioning centralised programmable remote contol panel (HMI) touch manager controls minimum 16 system of minimum 64 ODU\"s can be controlled and up to 992 IDU\"s can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangement to integrate with provided fire alarm system.
416	SUPPLY OF CORDLESS REMOTE CONTROL
417	MS STANDSupply & Installation of MS Structure for installing VRF/ VRV outdoor units with 2 coats of red oxide paint andblack paint.
418	Supply & Gas R 410 A charging of Refrigerant Gas
419	COLD ROOM WORKS HIGH SIDE Refrigeration Unit With Temp. Controller IDUIDU unit 2Nos BM44 WTIH HICOOL ODU unit2Nos KHR530PQE Single Phase unit
420	COLD ROOM WORKS LOW SIDE10108=60 MM THICK PUF PANEL 60 mm Thick PUF Panel with Cam Lock
421	0.4 mm Thick PPGI Sheet Inclusive FlashingSilicon Sealant Rivets and Cam Lock Plug60 mm Thick Hinge Type Flush Door Size - W 860mm X H 1980 mm 3 Side Frame Bottom WithSweeper Gasket 2 Nos Hinges Door CloserHandle with Lock Emergency exit from i
422	Installation and testing commissioning freezer 40 ft copper pipe
423	Lifting & Shifting Charges.
424	Estimate - 12 Laboratory Furniture - BACTERIOLOGY SECTION
425	R.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without Upright , 1540 Island Without Upright & 920 Wall Side With Upright
426	R.H. 900 Ht.C-Frame Assy. For Table Depth 1540 Island With Upright
427	L.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without Upright , 1540 Island Without Upright & 920 Wall Side With Upright
428	L.H. 900 Ht.C-Frame Assy. For Table Depth 1540 Island With Upright
429	Common 900 Ht.C-Frame Assy. For Table Depth 1540 Island With Upright
430	1500 Module Length Horizontal Members
431	1460End Sink Unit Module LengthHorizontal Members
432	Filler Panel For End Sink Unit Side
433	End Sink Unit Side Covr Panel
434	1540 Depth Island With Upright & Without Upright End Cover Panel
435	2100 Ht.Island Upright With Cutout & Plain Cover (Without Cutout)
436	2100 Ht.Island Upright With Cutout & Cover With Cutout
437	2100 Ht.Island Plain Upright & Cover With Cutout
438	1500 Module Length Island Electrical Boom - Cutout : 6 Module + 6 Module
439	1500 Module Length Glass Reagent Shelf For Island
440	WFU-SU-2S-600W-635H
441	WFU-2S-1D-750W-635H
442	WFU-1S-RH-445W-635H
443	WFU-1S-LH-445W-635H
444	Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D)
445	3 Way FaucetBench mounted 3 way water fittings with 8\" swing gooseneck
446	Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk
447	SiliconSealant - Black
448	Masking Tape
449	6 MM Self Adhesive Natural Rubber Strip
450	6/16A, 6 Pin Shutter Socket - Model No: M1332
451	6 Module Plate - Model No: Cs956M-S
452	16A, 1 Way Switch Model No: M0130
453	CHEMICAL STORE ROOM
454	resilience 1000 x 1500 x 486
455	MS Apparatus Storage Cabinet [with top cover plate] 900W X560D X 1800H
456	EYE SHOWER
457	Ss Emergency Safety Shower With Eye / Face Wash Complete Ss Construction
458	HAZARDOUS WASTE SECTION
459	R.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without Upright , 1540 Island Without Upright & 920 Wall Side With Upright
460	R.H. 900 Ht.C-Frame Assy. For Table Depth 1540 Island With Upright
461	L.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without Upright , 1540 Island Without Upright & 920 Wall Side With Upright
462	L.H. 900 Ht.C-Frame Assy. For Table Depth 1540 Island With Upright
463	Common 900 Ht.C-Frame Assy. For Table Depth 1540 Island With Upright
464	1500 Module Length Horizontal Members
465	1460End Sink Unit Module LengthHorizontal Members
466	Filler Panel For End Sink Unit Side
467	End Sink Unit Side Covr Panel
468	1540 Depth Island With Upright & Without Upright End Cover Panel
469	2100 Ht.Island Upright With Cutout & Plain Cover (Without Cutout)
470	2100 Ht.Island Upright With Cutout & Cover With Cutout
471	2100 Ht.Island Plain Upright & Cover With Cutout
472	1500 Module Length Island Electrical Boom - Cutout : 6 Module + 6 Module
473	1500 Module Length Glass Reagent Shelf For Island
474	WFU-SU-2S-600W-635H
475	WFU-2S-1D-750W-635H
476	WFU-1S-RH-445W-635H
477	WFU-1S-LH-445W-635H
478	Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D)
479	3 Way FaucetBench mounted 3 way water fittings with 8\" swing gooseneck
480	Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk
481	SiliconSealant - Black
482	Masking Tape
483	6 MM Self Adhesive Natural Rubber Strip
484	6/16A, 6 Pin Shutter Socket - Model No: M1332
485	6 Module Plate - Model No: Cs956M-S
486	16A, 1 Way Switch Model No: M0130
487	HOT ZONE
488	R.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without Upright , 1540 Island Without Upright & 920 Wall Side With Upright
489	L.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without Upright , 1540 Island Without Upright & 920 Wall Side With Upright
490	1500 Module Length Horizontal Members
491	770 Depth Wall Side Without Upright End Cover Panel
492	Outer Cover For Single-Sided Electrical Trunking
493	1500 Module Length Single Side Electrical Trunking - Cutouts: 6 Module + 6 Module + 6 Module
494	WFU-2S-1D-750W-635H
495	Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk
496	SiliconSealant - Black
497	Masking Tape
498	6 MM Self Adhesive Natural Rubber Strip
499	6/16A, 6 Pin Shutter Socket - Model No: M1332
500	6 Module Plate - Model No: Cs956M-S

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Repair And Renovation Of Mpc Boards Regional Office And Laboratory, Nagpur Located At 5Th And 6Th Floor, Udyog Bhavan, Nagpur, Mumbai-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Repair And Renovation Of Mpc Boards Regional Office And Laboratory, Nagpur Located At 5Th And 6Th Floor, Udyog Bhavan, Nagpur, Mumbai-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us