|
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 2 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer\"s specification [Cement to be supplied by the Department]. |
| 3 | Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. b) 25 mm thick |
| 4 | Welding in M.S. structural work with gas or electric:(b) Continuous weld. |
| 5 | (a) Tack weld |
| 6 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(d) Sal : Local. |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar(b) 20 mm thick plaster First Floor |
| 8 | Second Floor |
| 9 | (ii) With 1:4 cement mortar(c) 10 mm thick plaster First Floor |
| 10 | Second Floor |
| 11 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) |
| 12 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two CoatsFirst Floor |
| 13 | Second Floor |
| 14 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.ii) 25mm Thick |
| 15 | (Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.(iv) Two point nose steel handle including fitting and fixing. |
| 16 | (viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.First FloorSecond Floor |
| 17 | Renewing steel plated or oxidised casement stay or peg stay of steel window frames including painting two coats with approved paint complete. |
| 18 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 19 | b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 20 | A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :(iv) Two coats (with any shade except white) |
| 21 | a) On timber or plastered surface :(iv) Two coats (with any shade except white) |
| 22 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall).(i) 3 mm thick (weighing 7.4 kg/Sq.m) |
| 23 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 24 | Labour for dismantling G.I. pipe with fittings.(i) 15 mm dia. |
| 25 | (ii)20mm dia |
| 26 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately).(a) For Exposed Work :PVC Pipes15mm dia. |
| 27 | 20 mm dia. |
| 28 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 20.(Q) Ball Valve20 mm |
| 29 | (V) Female threaded adopterBrass Threaded)15mm |
| 30 | (U) Male threaded adopter(Brass threaded)20mm |
| 31 | (W) Female Elbow(Brass threaded)15mm |
| 32 | Supplying,fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts,nuts etc.(a) With \"P\" trap |
| 33 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.P.W.C. (ii)Plastic (hallow type) white |
| 34 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 35 | Supplying,fitting and fixing approved brand P.V.C.CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii)600 mm long |
| 36 | Supplying,fitting and fixing approved brand 32 mm. dia. P.V.C.waste pipe, with coupling at one end fitted with necessary clamps.(iii) 900 mm long |
| 37 | Supplying, fitting and fixingbib cock or stop cock.(e)PTMT ( Polytetra Bib Cock / Stop Cock (Prayag or equivalent )15mm |
| 38 | Supplying, fitting and fixing shower of approved brand and make.(g) PTMT overhead shower (Prayag or equivalent).(i)75 mm. round. |
| 39 | Dismantling E.P. or Anglo-Indian W.C. |
| 40 | Wash basin white vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(ii)550 mm X 400 mm size |
| 41 | Supplying,fitting and fixing PTMTSmart Shelf of approved make of size 300 mm. |
| 42 | Supplying, fitting & fixing Aluminium domical grating.(ii)125 mm |
| 43 | Suppling, fitting & fixing Hand Shower (Health Faucet) with PVC flexible pipe (1m) long with wall hook.PTMT Hand Shower (Prayag or equivalent) . |
| 44 | Sub Total |
| 45 | GST 18% |
| 46 | CESS 1% |
