|
| 1 | Earth work in excavation by mechanicalmeans (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done b |
| 2 | Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of thislayer shall be 20 cm. |
| 3 | Treatment of soil under existing floors using chemical emulsion @ one litre perhole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : M-25 – Grade concrete |
| 5 | M-20 – Grade concrete |
| 6 | With 20mm nominal size graded stone aggregate.M-15 – Grade concrete |
| 7 | With 40mm nominal size graded stone aggregate.M-15 - Grade concrete |
| 8 | M-10 Nominal (Mix -1 Cement : 3 sand : 6graded stone aggregate) |
| 9 | Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. |
| 10 | above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. |
| 11 | Providing and laying in position specified grade of einforced cement concrete (with 20mm nominal size graded stone aggregate)excluding the cost of centering,shuttering, finishing and reinforcement - All work up to plinth level :M-20 Grade Concrete |
| 12 | M-15 Grade Concrete |
| 13 | Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete |
| 14 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in Cement mortar 1:4 (1 cement : 4sand) |
| 15 | Cement mortar 1:6 (1 cement : 6 sand) |
| 16 | Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : |
| 17 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge.30 mm thick |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion insidegrooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Kiln seasoned and chemically treated Haldu, Kail, Bija wood |
| 19 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces ofshutter.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 20 | Providing and fixing ISI marked flush doorshutters conforming to IS: 2202 (Part I)nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces ofshutters. 30 mm thick including ISI markedStainless Steel butt hinges with necessary screws. |
| 21 | Providing and fixing in wall lining flatpressed three layer (medium density) particle board or graded wood Prelaminated one side decorative lamination on other side balancing lamination Grade I,Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete :12 mm thick |
| 22 | Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:25 mm dia. |
| 23 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.including priming coat with approved steel primer all complete.Fixed to steel windows by welding. |
| 24 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 25 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19mm. |
| 26 | With 12 mm mild steel U beading. |
| 27 | Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete:300x16 mm |
| 28 | 250x16 mm |
| 29 | 250x10 mm |
| 30 | 200x10 mm |
| 31 | 150x10 mm |
| 32 | Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :125 mm |
| 33 | 100 mm |
| 34 | Providing and fixing fly proofstainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete.With 2nd class teak wood beading 62x19 mm. |
| 35 | With 12 mm mild steel U beading |
| 36 | Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineerin-Charge. |
| 37 | Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hingescomplete as per direction of Engineer-in- Charge.With decorative veneering on one side and commercial veneering on other side. |
| 38 | Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded woodparticle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Gradel Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium \"U\" type edge beading allround the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of \"U\" beadingand hinges will be paid for separately). |
| 39 | Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0 mm (± 0.2mm), corners ofthedoor frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wallthickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and directionof Engineer-in-charge:Extruded section Profile size 48x40 mm. |
| 40 | Extruded section Profile size 42x50 mm. |
| 41 | Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thickfactory made UPVC door shutters made ofstyles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by means ofM.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of theshutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of a UPVC hollow \"H\" section, section of size 100x24 mm and 2 mm (± 0.2 mm)wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. \"U\" cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled verticallyand tie bar at two places by insertinghorizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer\"s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 42 | Providing and fixing factory made single extruded WPC(Wood PolymerComposite) solid door/window/ceosetory windows and otherames/chowkhat comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibersoodpowder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity indexof 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed S.S. screws having minimumdensity of 750 kg/m3 and screw withdrawal strength of 2200 N (Face) & 900 N (Edge), minimum compressivestrength 58 N/mm2 , modulus of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of beingermite/borer proof, water/moisture proof and fire retardant andfixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) |
| 43 | Single rebate (100 mm X50 mm) |
| 44 | Single or double rebate (125 mm X 65 mm) |
| 45 | Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 46 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. |
| 47 | Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying apriming coat of approved steel primer. |
| 48 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessaryfittings complete, including applying Using M.S. angels 40x40x6mm for diagonal braces |
| 49 | Using flats 30x6mm for diagonal bracesand central cross piece. |
| 50 | Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and othertubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). |
| 51 | Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). |
| 52 | Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet includinghinges, jamb, lock jamb, bead and if required angle threshold of mildsteel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel weldedor rigidly fixed together byechanical means, including 2.5mm thick M.S. pressed butt hinges, with mortar guards, lock strikeplate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (costof concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- chargeFixing with adjustable lugs with split end tail to each jamb. |
| 53 | Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washersetc. complete Hot finished seamless type tubes |
| 54 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. Ingratings, frames, guard bar, lader, railings, brackets, gates and similar works |
| 55 | Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineerin-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 56 | Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.With 5.50 mm thick glass panes |
| 57 | With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. |
| 58 | With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm boxbeading. |
| 59 | Supplying at site: Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paidSeparately) |
| 60 | 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not toexceed 2.0 sqm) |
| 61 | Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixedwith pigment to match the shade of slab. |
| 62 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to beover 0.25 sqm) Note: - Deduction shall be made for not mirror polishing according to item no 11.43 |
| 63 | Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 20 mm thick |
| 64 | Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 65 | Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed withgrey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 66 | Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 67 | Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st qualityconforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 68 | Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour andpattern over and including 50mm thick compacted bed of stone dust, filling the jointswith sand etc. all complete as per thedirection of Engineer-inCharge. |
| 69 | Providing and laying vitrified floor tilesMulti/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than0.05% and conforming to IS:15622 of approved Size 600X600 mm thickness 9-10 mm |
| 70 | (a) Size 600X600 mm thickness 9-10 mm |
| 71 | Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete (a) Size 600X600 mm thickness 9-10 mm |
| 72 | (a) Size 600X600 mm thickness 9-10 mm s |
| 73 | Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter |
| 74 | Course granite light Black/light Red/ off White with crystals of other colors and various patterns |
| 75 | Gray/Pink/Brown with various patterns |
| 76 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m² |
| 77 | 0.63 mm thick with zinc coating not less than 275gm/m² |
| 78 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 79 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size595x595 mm, made of Gypsum plasterboard, manufactured fromnatural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so asto make the tile a ompletely sealed unit. |
| 80 | 1:4 (1 cement : 4 sand) |
| 81 | 1:6 (1 cement : 6 sand) |
| 82 | 1:4 (1 cement : 4 sand) |
| 83 | 1:6 (1 cement : 6 sand) |
| 84 | 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat ofneatcement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. |
| 85 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. |
| 86 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. |
| 87 | Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organicompound) content less than 50 grams /litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. |
| 88 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 89 | Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work |
| 90 | Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. |
| 91 | Float glass panes of thickness 5.5mm |
| 92 | Removing dry or oil bound distemper, water proofing cementpaint and the like by scrapping, sand papering and preparing thesurface smooth including necessary repairs to scratches etc. complete. |
| 93 | Finishing walls with Acrylic Smooth exterior paint of requiredshade : |
| 94 | Demolishing lime concrete manually/by mechanical meansand disposal of material within 50 metres lead as per direction ofEngineer-in-Charge. |
| 95 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). |
| 96 | Demolishing R.C.C. work manually/ by mechanical meansincluding stacking of steel bars and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-inCharge. |
| 97 | In cement mortar. |
| 98 | White Vitreous china Orissa pattern W.C. pan of size 580x440mm withintegral type foot rests. |
| 99 | W.C. pan with ISI marked white solid plastic seat and lid |
| 100 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern. |
| 101 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 102 | White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. |
| 103 | 510x1040 mm bowl depth 225mm. |
| 104 | 610x510 mm bowl depth 200 mm. |
| 105 | Long pattern W.C. pan of size 580 mm |
| 106 | Orissa pattern W.C. pan of size 580x440 mm |
| 107 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS: 7231, with allfittings and fixtures complete. 10 litre capacity |
| 108 | coloured |
| 109 | Flat back wash basin of size 630x450mm. |
| 110 | Flat back wash basin of size 550x400mm. |
| 111 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plainand brass threaded fittings. This included jointing of pipes and fittings with onestep CPVC solvent cement, trenching, refilling andtesting of joints complete as per direction of Engineer-in- Charge. 15 mm nominal outer dia .Pipes. |
| 112 | 20 mm nominal outer dia .Pipes. |
| 113 | 25 mm nominal outer dia .Pipes. |
| 114 | 32 mm nominal outer dia .Pipes. |
| 115 | 40 mm nominal outer dia .Pipes. |
| 116 | Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore |
| 117 | 32 mm nominal bore. |
| 118 | Providing and placing on terrace (at all floor levels) polyethylene water storagetank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 119 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore. |
| 120 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mmnominal bore. |
| 121 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gm, 15 mmnominal bore |
| 122 | Providing and fixing C.P. brass stop cock (concealed) of standard design and ofapproved make conforming to IS: 8931. 15 mm nominal bore. |
| 123 | Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. 15 mm nominal bore 125 mm long foam flow. |
| 124 | Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. |
| 125 | Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. |
| 126 | Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. |
| 127 | Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification.15 mm nominal bore. |
| 128 | Providing and fixing C.P. brass shower rose with 15 or20 mm inlet : 100 mm diameter |
| 129 | Providing and laying below ground unplasticised PVC pipe to with stand workingpressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing withseal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD(min. wall thickness 3.2mm) |
| 130 | With well burnt bricks |
| 131 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) |
| 132 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 133 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) |
| 134 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 135 | Providing and fixing 12mm thick Pre-laminated particle board flatpressed three layer or graded wood particle board conformingto IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge. |
| 136 | With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) |
| 137 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in |
| 138 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course ofstone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface butexcluding grading, complete. (With five yearsservice gurantee). |
| 139 | Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) |
| 140 | Cement mortar 1:3 (1 cement : 3 sand) |
| 141 | Cement mortar 1:4 (1cement : 4 sand) |
| 142 | White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440X575X250mm With integral foot rests. (Premium Range) |
| 143 | White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410X515X255 mm with integral foot rests. (Premium Range) |
