|
| 1 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.As Per PWD DSR-2022-23, item no 23.04 |
| 2 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5Kilogram/sq.m.)..As Per PWD DSR-2022-23, item no.38.04 |
| 3 | Providing and erecting single scaffolding for painting, water supply and sanitary pipe line repair works using bamboo male of 1\" to 1-1/2 \"dia. Vertical and Horizontal at 1.20 mtr.and necessary cross bamboos and short bamboos for supports from bldg. by taking necessary holes in wall and remaking good the damages after completion of work, including coir and all necessary material including conveying loading unloading including removing the same offer completion of work by taking necessary precautions and safety measures of labour etc. As Per P-78/I-15 from P.W.D. DSR (2015-16) |
| 4 | Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) As per PWD DSR 2022-23, Item No .24.06 |
| 5 | Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. Note : Following items to be executed after prior approval of Superintending Engineer. As per PWD DSR 2022-023,item no.32.33 |
| 6 | Removing loose rust from the reinforcement bars by wire brushing, light hammering etc.and applying sulphate and chloride free inorganic single component rust remover Rusticide as approved by Engineer incharge conforming to IS 9077.The rusted surface shall become black is hnon rusted colour.After24 hours of application of rust remover, loose particles shall be removed by brush.Apply one more coat of Rusticide.Apply bonding coat slurry of high performance acrylic polymer-Methyl 2-methylprospecial cements, aldehydebasedpolymerswith thixotropymodifyingagents as approvedbyEngineer incharge (ThePolymerModifiedMortar(PMM)shouldattainmin.comcanbetrowel appliedor sprayed.Whenapplyingbyhand,polymermodifiedmortarmust be forced tightly into the substrate toensurecomplete contact with the substrate. (If scaffolding is required, same shall be provided andwill be paid under relevantitem)(Upto 15 mm thickness at a time).. As per PWD DSR 2022-023,item no. 52.35 |
| 7 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1Kilo gram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to8mmthick incementmortar 1:4 finishing the surface by taking out grainsandcuringforfourteendays scaffolding etc.complete. As per PWD DSR 2022-023,item no. 32.11 |
| 8 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,wateringand scaffolding etc. Complete As per PWD DSR 2022-023,item no. 27.05 |
| 9 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat,scaffoldingif necessary , and watering the surface for two days etc complete.As per PWD DSR 2022-023,item no. 35.25 |
| 10 | Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint,removing loose particles of sand on the sn from Engineer in- charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamppaper of Rs. 500/- and necessary testing etc. complete.As per PWD DSR 2022-023,item no. 35.29 |
| 11 | Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete.As per PWD DSR 2022-023,item no. 46.59 |
| 12 | Removing any kind of debris including loading in truck and conveying day to day basis to approveddumping point etc complete with all lifts and lead of 52 Km (As directed by Engineer in Charge )As per PWD DSR 2015-2016,page no.195 |
