|
| 1 | Name of the Work : Construction of New Anganwadi Building at Kovilpatty H/OPannapatty Panchayat |
| 2 | Earth work excavation for foundation in all clauses of soils and sub soils to 1 full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc., complete |
| 3 | Supplying and Sand Filling from Approved Sources including cost and Conveyance of all materials etc., complete. |
| 4 | Cement concrete 1:4:8 mix (one cement four sand and eight aggregate)using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted.etc, |
| 5 | Brick work in cm 1:5 mix(one cement and five sand)using country bricks ground maded of size 23 x 11 x 7 cm including curing finishing and cost & Conveyance of all materials etc., complete. |
| 6 | Supplying and filling of excavated earth for basement filling including all materials to site and all labour charges etc |
| 7 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm For Column upto grade beam |
| 8 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm Lintel Beam Main wall Alround |
| 9 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete |
| 10 | RCC 1:1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering shuttering, and cost of reinforcement grill out including curing etc complete and also including fixing fan clamps and ixtures in rcc works |
| 11 | Plastering with cm 1:5 mix( one cement and five sand) to 12 mm thick 9 including cost and conveyance of all materials in all floors ete as directed by departmental officers etc, complete complying with standard specifications |
| 12 | Plastering surfaces of RCC items such as slabs, beams sunshades with cement mortar 1:3-10mm thick including packing, providing cement mortar beading for sunshades staircase,steps, lands slabs etc., as directed by departmental officers etc, complete |
| 13 | Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends, & clamps etc |
| 14 | Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab, the proportion of brick jelly to lime being 32 to 12.5 well beated with wooden beaters for giving required slope and thickness |
| 15 | Finishing top roof mix one course machine pressed tiles of size 20 cm x 20 13 cm x 2 cm approved qty with, CM.1:3 12 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc |
| 16 | Supplying and fixing of cudappah slab 50mm inciding cost and conveyance and all labour charges etc complete.. |
| 17 | Supplying and fixing in position Baby pan, white glazed earthen ware of Approved quality with \"P\" trap or \"S\" trap confirming to IS:2556-Part XII with sand cushion and forming the closet using 40mm broken brick jelly in lim |
| 18 | Supplying and fixing in position ordinary colour glazed Eropean water closet of best quality and approved make with 100mm\" P\" or \"S\" trap with double flapped rigit P.V.C seat level flushing tank with 10 liters PVC low level Flushing tank with all internal fittings etc., complete complying with standared specification |
| 19 | Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete., |
| 20 | Supplying and Paving the floor with Vetrified tiles 0.60mx0.60mx0.08m for approved quality cost and conveyance of all materials to site and all labour charges etc |
| 21 | Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick Including cost and conveyance of all materials to site and all labour charges etc |
| 22 | Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc |
| 23 | Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete. |
| 24 | Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping, clean removel of dirt etc complete. |
| 25 | Painting two coats of new iron work with best quality synthetic enamel paint approved quality and colour with priming coat including the cost all aterials etc.complete, in all floors. |
| 26 | Fabricating Supply and fixing and position of MS Door with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered |
| 27 | Door 1.00mX2.10m |
| 28 | D1 1.10mx2.10m |
| 29 | D1 0.75mx2.10m |
| 30 | Fabricating Supply and fixing and position of MS Windows with two leave. The window outer frame will be 35x35x6mm MS angle, the shutter frame will be 25x25x6 mm, MS angle intermediate stiffner will be 25x25x6 mm with cross stiffner 25x 25x5 mm flats covered |
| 31 | Window size 1.20mx1.30m |
| 32 | Ventilator 0.90m x 0.45m |
| 33 | Supplying and fixing following electrical arrangement |
| 34 | Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu. Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm |
| 35 | Light and Fan point |
| 36 | Supply and fixing tube light fittng and all labor charges to complete SD 87 |
| 37 | Supply and fixing CFL bulb and all labour charges to complete SD 83 |
| 38 | Supply and fixing PVC PLUG POINT and all labour charges to complete SD39 |
| 39 | Supply and fixing of single Type street light Flu. fitting complete with copper ice and condensor with TW round blocks on wall or coiling with flu tube with Cunsheathed copper leads from terminals to the fittings for Street light 50 94 |
| 40 | Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia Gf pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains |
| 41 | Supply and runoff 2 of 6 mm2 (84/0.3) pvc Insulated SC unsheathed Cu.conductor of 1100 v on 7/20 Gi bearer wire for service connection main SD 64 |
| 42 | Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral (side handle) on suitable TW/PWD Earthing SD135 Service main |
| 43 | Supplying and fixing of 1200mm (40\")AC Ceiling fan with stepped electronic 300W regulator with im down rod on the existing clamp SD 106 |
| 44 | Supplying and fixing of Excauste fan with stepped electronic 300W regulator with 1m down rod on the existing clamp |
| 45 | Provision for Bala Painting |
| 46 | Labour Charges for fixing jolly, doors & Windows |
| 47 | GST Amount for providing Service to Government Contract Works for the above ConstructionWorks.GST Amount is the Total GST Amount for overall quoted amount above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
