|
| 1 | Dismaltling of existing plaster/broken tiles including disposal of refuse as directed by engineer incharge as per si. No. 706 |
| 2 | Racking out joints of brick work in cement or lime mortar to a depth of 1CM I/C disposal of refuse as directed by engineer in charge with in a distance of 60meters. As per S.I. No. 707 |
| 3 | Dismantling of cement concrete or brick or granolithik floors & I/C staking dismanteled material as directed by engineer in charge.As per S.I. No.697 |
| 4 | Scraping old white or colour wash including disposal of refuse material as directed by Engineer-in charge with a distance of 60met.(200feet) S.I. No. 708 |
| 5 | Brick Work with common burnt clay F.P.S. (non modular) bricks of class-150in superstructure above plinth level up to floor V levelin all shapes and sizes Cement mortar 1:6 (1 cement :6 coarse sand) |
| 6 | Providing and fixing of Murga jalicomplete asPWDSOR |
| 7 | Providing and laying cement concrete in retaining walls, return walls, walls (anythickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm (nominal size). |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 9 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 10 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, ofapprovedbrandandmanufacturer,overtheplasteredwallsurfaceto prepare the surface even and smooth complete. |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 14 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 15 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, includinggrouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm |
| 16 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 17 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of appproved make, in all colours, shades, except burgundy, bottle green, black of any size as approved by Engg-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement mixed with pigment of matching shade complete |
| 18 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 19 | Brass Bib Cock (15mm dia) 200gm |
| 20 | Supply of CI round jali 100mm dia. |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes. 18.8.3 |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal outer dia Pipes. 18.8.4 |
| 23 | Mirror of Atul make with Indian polish of 600x450 mm dia sixe with bevelled edge |
| 24 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931, 15mm nominal bore. 18.53.1 |
| 25 | Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) with putty and nails including all |
| 26 | S/F of Inaguration Stone, Flex printing or Sign Board |
