|
| 1 | Carriage offollowing Materialfrom store center or from any other place to the respective site of work Distence up to 75 km through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, T & P and carrier etc. required for proper completion of work. |
| 2 | ST Pole SP55 11M Long |
| 3 | P.C.C. Pole 8.5 Mtrs. |
| 4 | ABC Cable (3x95+1x70+1x16sq.mm) |
| 5 | ABC Cable (3x120+1x95+1x16sq.mm) |
| 6 | 25/63/100 KVA D.T, (New) |
| 7 | 250 KVA D.T. (New) |
| 8 | A.C.S.R. Weasel conductor |
| 9 | A.C.S.R. Dog conductor |
| 10 | 11 kv Outgoing VCB |
| 11 | Different Line Material ( Conductor, X-Arm,Channel, Insulator , G.I. Wire , Stay wire & Rod, Earth Rod , DB BOX etc.) |
| 12 | Supply and Errectionof Following Electric Material(As Per Norms of UPPCL/DVVNL):- |
| 13 | VªkalQkeZj VªkWyh 4 Oghyj %&Qzse & ,e0,l0 pSuy& 100x50x6 ,e0,e0 o 75x40x4.8 ,e0,e0] ,afxy& 50x50x6 ,e0,e0] VªkWyh lkbZt& 3658x1829x2300 ,e0,e0] csl “khV& 6 ,e0,e0] lkbZM esa ,DlisaMsM esVy tkyh] Vk;j lkbZt& 7.50x16 ¼Vk;j esd& ts0ds0@,e0vkj0,Q0@fcjyk@lh;sV½ 14 IykbZ] yhQ fLizax&13 yhQ] ,Dly lkbZt& 65@63 ,e0,e0 LDok;j Mcy IysVsM fje isaV lfgrA ¼otu& 1760 ds0th0 ±10 ds0th0½ |
| 14 | Meggar 5 kva Digital |
| 15 | Multi Meter Digital |
| 16 | Tong Tester Digital |
| 17 | Wire Cutter |
| 18 | Crimping Tool |
| 19 | Stone Pad (300*300*75sqm) |
| 20 | X-arm Holding Clamp for P.C.C./S.T. Pole |
| 21 | Stay Insulator |
| 22 | T-off Channel clamp with N & B |
| 23 | Earth wire Clamp with N & B |
| 24 | D.P. Clamp with N & B |
| 25 | Stay Clamp with N & B |
| 26 | PG Clamp with N & B |
| 27 | LT Clamp with N & B |
| 28 | Danger Board with Clamp and N&B |
| 29 | 11 kv. F-Clamp with N & B |
| 30 | 33 kv. F-Clamp with N & B |
| 31 | Grouting of Pole |
| 32 | Grouting of Stay |
| 33 | All. Lug 630/400/240/120/70 Sqmm. |
| 34 | Chemical Earthing |
| 35 | Number Plate with Clamp and N&B |
| 36 | L-Type Copper Clamp with N&B |
| 37 | Eye Hook Clamp with N&B |
| 38 | Suspension Clamp with N&B |
| 39 | Dead End Clamp with N&B |
| 40 | PRC. Connector |
| 41 | Guarding Angle Clamp with N&B |
| 42 | Erection of Following Materialincluding the work of complete H.T. fittings as per RESPO manual and as per direction of engineer Incharge including the cost of labour, T & P and carrier etc. required for proper completion of work. (With proper Earthing.) |
| 43 | Single Pole Structure of 11 Mtr ST Pole |
| 44 | Double Pole Structure of 11 Mtr ST Pole |
| 45 | Single Pole Structure of 8.5 Mtr PCC |
| 46 | Double Pole Structure of 8.5 Mtr PCC |
| 47 | Stay Set |
| 48 | Stringing of LT ABC ( Different size) as per RESPO Norms. |
| 49 | Laying, Sagging, Stringing, Binding and Jumpering etc. of Weasal/Racoon /DOG conductor on the newly erected pole/ old poleas per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carries etc. required for proper completion of work. |
| 50 | Muffing of S.T.P. as per RESPO Norms ( Require Material will be provided by Contractor ) |
| 51 | Painting of S.T..P. ( Red Oxide and All. Paint will be provided by contractor ) |
| 52 | Guarding between two poles like single / double / Tri / Four Poles etc. to guard LT / 11 Kv / 33 KVLine, Road / River crossing ect. With G.I. wire 6 SWG and G.I. wire 8 SWGincluding fixing of guarding channel with clamp and Nut & Bolts etc. As per relevent drawing . |
| 53 | Dismantling of existing 33KV/11 KV / L.T. line and removal of all accessories & fittings from poles, re-rolling of conductor and proper stacking and Cartage of dismantled conductor & accessories from site of work to DVVNL, Store. |
| 54 | Back Cartage of DT from work site to store as per direction of JE Incharge. |
