Tender For Underground Electrification Work In Sector-1, 2, 3 And 4 Of Greater Bareilly Housing Scheme - Supply, Delivery, Erection, Testing And Commissioning Of Cubic Type Otdoor Weather Proof Main Feeder Pillar Made Of 2 Mm Ms Sheet Of Size 1500 ×1000×, bareilly-Uttar Pradesh

Tender For Underground Electrification Work In Sector-1, 2, 3 And 4 Of Greater Bareilly Housing Scheme - supply, delivery, erection, testing and commissioning of cubic type otdoor weather proof main feeder pillar made of 2 mm MS sheet of size 1500 ×1000×600 mm into water tight, dust and vermin proof with hinged door and lockinch arrangement of front and rear side, 2 nos locks incoming and outgoing fuse carriers, cable entry earthing strip, incorporating the following technical spefications with complete power coating single line diagram of main feeder pillar is to be painted showing feeding arrangement(a) incoming nos 400 Amp SFU with HRC fuse links (EE/GE/C&S/Simens/L&T make)(b) Busbar 500 v, 400 Amp TPN Aluminium with insulation paint size 50×8 mm(c) Outgoing 10 Nos. 63 Amp TPN, 415 V HRC fuse link (EE/GE/C&S/Simens/L&T make)as per drawing of feeder piller enclosedand feeder pillar will be mounted on cement complete foundation 1:2:4 ( 1 cement 2 course sand graded stone aggreegate 20 mm nominal size) of suitable size. the feeder piller will be manufacture by CPRI Approved company analysis of rate (approx weight 196 KG) without accessories. 2 S/L of L.T. armoured cable at depth of 75 cm below ground level a cautionof 75 mm thick sand around and protected with bricks on sides and top and crossing of the road cable shall be run through 150 mm dia hume pipecomplete in all respectof following size from transformerto distribution pillarand distribution pillar to O.H. line (a) 400 Sqm mm 3½core (S.I. 501 t ) (2048-170=1878) 3 S/L of L.T. armoured cable at depth of 75 cm below ground level a cautionof 75 mm thick sand around and protected with bricks on sides and top and crossing of the road cable shall be run through 150 mm dia hume pipecomplete in all respectof following size from transformerto distribution pillarand distribution pillar to O.H. line (b)185 Sq mm 3½core (S.I. 501 q) (1140-170=970) 4 supplyand erection of plain /pin type cable socket (lugs)of the cable leads insulating with tape and connection etc. 400 Sq mm (504 o) cpwd/2018 5 supplyand erection of plain /pin type cable socket (lugs)of the cable leads insulating with tape and connection etc. 185 Sq mm (504 L)cpwd/2018 6 Supply and burring of safe earthing electrode T-19, (Hot Dip Galvanised), length up to 3000 mm,outer dia 50mm, inner dia 25 mm, terminal dia 12 mm, outer G.I. pipe of 16 swgand inner G.I. pipe of 12 swg with hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kg activated soil (BFC) capable of reducing the soil resistivity with good mixtureof retating capacity and one earthing lead of 25×3 G.I. strip, up to switch board aloang with 30 cm. square C.I. frame with hinged cover and manosary housing. make: As approved in U.P.P.W.D. & C.P.R.I. Certified (S.I. 725 B) /2018 7 Supply and erection of 11 meterloang tubular pole SP 55, 1/6 over all length polegroutedin cement concrete with 1:3:6 (cement concrete) of pole 30 cm above the ground levels including excavation, back filling etc. rates includes all materials, labour, T&P etc. required for proper completionof the workas per E/I. AR/2018 8 S/F 11 KV pin insulator with on steel pole or any where specified including bolts to fastenthe pole cap/cross arm with the pole. AR SI.NO. 13.10 CPWD 2018 9 S/F of straight M.S. channal 100×50×6 mm 9.56Kg/Mt. long 1.15 mtr as per design for cross arm with clamp, nuts, bolts, red enamel painting etc. u.p.w.d. / 2018 10 Supply and fixing of straight M.S. channel 75×40×6 mm 5.7Kg/Mt 2.24 Mt loang for guarding with two nos of eye bolts, clamp red enamel painting etc.AR SI No 13.16 CPWD 2018 11 S/F of 11 KV T.P.M.O. of with D.O. fuse set complete in all respect. AR ( As per UPPCL cost shedule 2018-19 P.S. ) 12 S/F of 11 Kv lighterning arrestor (comprising of 3 units) complete with base short with G.S. strip. AR (S.I. No.13.13 CPWD 2018 ) 13 Construction of transformer plinthof size ( 2×1.5×1 mt) with all materials required for proper completion of the work. AR as per UPPWD sheduled 2018 14 Supply and making suitable earthingof neutral/bodyof T/F/D.P./ACB/Lighting arrestor with 900×900×6 mm G.I. plate burried vertically bellow6 meter G.L. 8 upto water level 7/10 SWG G.I. stay wire complete with all material, labour T&P etc. (S.I. 702) 2018 15 Supply and fixing of 2 metres high cage fabricated with 3 mm thick expanded metal fixed n 50 mm x 50 mm x 6 mm angleiron frame having vertical members spaced at 1 to 1.25 mts and horizonatal members spaced 1 mt The vertical members shall be grouted in floor and horizontal members in the walll to a depth of 300 mm with ends forked.The cage shall have 2000 mm x 1000 mm size one leaf door with locking device having door frame fabricated with 35 mm x 35mm x 6 mm angle iron and 3 mm expanded metal duty fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes alll materials, labour, T&P etc for proper completionof work. SI. No. 1142/2018 16 S/F of cubical box dust and vermin proof 2/3/4 way distribution box of 16 SWG M.S. sheet of 15 mt weight with suitable size of copper 3 Nos tailness unit 500 Amp.Cut out inside looking arrangement hubdle danger plate etc including two coat of approved quailty paint and earthingby two nos 7/10 SWG wire which will be taken as loop from existing sub station earthing the job including all material labour T&P suitable foundation for mounting the bars etc complete.(ps) 17 S/F of B class of 150 mm dia G.I. pipe with M.S clamp nuts & bolt complete in all respect as per direction of E/I.SI No. 14.13.4cpwd/2018 18 S/Lof 120 sq mm 3 core stranded aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel srip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and proected with well burnt bicks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. (S.I. 506 f)/2018 19 S/M of out door push on type cable jointing kit suitable for 240/300/400 sq. mm XLPE cable make M seal/cab seal etc complete SI No. 10.5.2cpwd/2018 15001 x100/113=13275 20 S/F of transformer 11/.44 KV copper wound level 1 rating 400 KVA transformer. Complete in all respect . (as UPPCL cast sheduled 2018-19 21 S/F of B class of 100 mm dia G.I. pipe with M.S clamp nuts & bolt complete in all respect as per direction of E/I.SI No. 14.13.4cpwd/2018 22 Painting of electric pole with 2 coats of aluminium paint over red oxide primer complelete in all respect. Approved by E/I, Sl. No. 634/2018 23 S/F of danger board fabricated from 10 gauge M.S. sheet. Approved by E/I, Sl. No. 1109/2018 24 Supply sagging, tensioning jumpering binding of suitable size A.C.S.R. Conductor including proper completion of work. Rabbit/DOG/weasel/RECON (S.N. 627)/2018 25 Making suitable earthing of electric pole atleast 2.5 m long 20 mm dia M.S. rod 7/16 of SWG GI including the cast of all material labour T&P etc. required for proper completion of work AR (As per UPPCL cost schedule 2018-19) 26 s/f OF ANTI CLAMPING device of barwed of device wire of 3t standard for each pole 3.0 kg. appx. With clamping complete in all respect as per direction of E./I SI No. 635/2019

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	24-04-2025	Corrigendum For Date	Date	01-05-2025

INR 25000 /-

INR 2560000.0 /-

INR 12.79 Crore /-