|
| 1 | Cast Steel Coupling for Mill size 33x66 New Material IS1030 |
| 2 | Cast Steel Coupling for Mill size 33x66 New Material IS2708 |
| 3 | Cast Steel Coupling for Mill size33x66 Conversion Material IS1030 |
| 4 | Cast Steel Coupling for Mill size 33x66 Conversion Material IS2708 |
| 5 | Cast Steel Coupling for Mill size33x66 Machining Charges |
| 6 | Cast Steel Crown Pinion for Mill size 33x66 New Material IS1030 |
| 7 | Cast Steel Crown Pinion for Mill size 33x66 New Material IS2708 |
| 8 | Cast Steel Crown Pinion for Mill size33x66 Conversion Material IS1030 |
| 9 | Cast Steel Crown Pinion for Mill size 33x66 Conversion Material IS2708 |
| 10 | Cast Steel Crown Pinion for Mill size33x66 ProfileTeeth Cuttingand Machining Charges |
| 11 | Cast Steel Trash Plate for Mill size 33x66 New Material IS1030 |
| 12 | Cast Steel Trash Plate for Mill size 33x66 New Material IS2708 |
| 13 | Cast Steel Trash Plate for Mill size 33x66 Conversion Material IS1030 |
| 14 | Cast Steel Trash Plate for Mill size33x66 Conversion Material IS2708 |
| 15 | Cast Steel Trash Plate for Mill size33x66 with Rough Machining Charges |
| 16 | Forged Steel Trash Plate New Material IS 1030 |
| 17 | Forged Steel Trash Plate New Material IS 2708 |
| 18 | Forged Steel Trash Plate Conversion Material IS 1030 |
| 19 | Forged Steel Trash Plate Conversion Material IS 2708 |
| 20 | Forged Steel Trash Plate Rough Machining Charges |
| 21 | Other Casting i.e. Trash BeamBearing Housing and Tail Bar etc New Material IS 1030 |
| 22 | Other Casting i.e. Trash BeamBearing Housing and Tail Bar etc New Material IS 2708 |
| 23 | Other Casting i.e. Trash BeamBearing Housing and Tail Bar etc Conversion Material IS 1030 |
| 24 | Other Casting i.e. Trash BeamBearing Housing and Tail Bar etc Conversion Material IS 2708 |
| 25 | Other Casting i.e. Trash BeamBearing Housing and Tail Bar etc with Final Machining Charges |
| 26 | Other Casting i.e. Trash BeamBearing Housing and Tail Bar etc with Final Machining Charges with drilling and taping |
| 27 | Cast Steel Pinion 33 Teeth Module 30 Face Width 500 Pressure Angle 20°No of teethtospanned 4SPAN MOTRTL 32384Material Cast Steel IS2644 Grade CS 85 Material hardness 220 BHN Min As per Free Hand Sketchwith Material and Ultrasonic Test Report (ON CONVERSION BASIS) With Final Teeth cutting, Final Machining, Final Bore With Key-Way Approx. Weight 2500 to 3000 Kg) |
| 28 | Cast Steel Crown Pinion 22 Teeth, Outer Diameter-290mm, Pitch-41 mm (Appprox) Length of Teeth-170 mm (Approx Wt-58 Kg Each) 01 Nos. Mat-IS2708 (ON CONVERSION BASIS) With Profile Teeth cutting, Machining Charges. |
| 29 | Cast Steel Scrapper for Mill No. 04 (Discharge Roller)as per Drawing No. SNEH20060506 Material IS1030 Grade II(Approx Wt-400 Kg Each)(ON CONVERSION BASIS) WithMachining Charges |
| 30 | Cast Steel Square Bracket Size 230 mm X 230 mm X 25 mm, Bosh Size OD-160 mm, ID-85 mm, Length-75 mm, Hole Size-27 mm (Approx Wt 14 Kg Each) (ON CONVERSION BASIS) |
| 31 | CS SPROCKET FOR BAGASSE CARRIER CHAIN Having Pitch 150mm As per Following Specification- Outer Dia of Sprocket-750mm, Pitch-150mm, Sprocket Thickness-63mm, Teeth Thickness-35mm, Bosh Thickness-135mm, Bosh OD-236mm, Bush ID as per Shaft Size |
