|
| 1 | EARTHWORK EXCAVATION for foundation in hard soil and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc.,including levelling the sites complete complying with standard specifications and as directed. (Hard Soil) |
| 2 | Filling in foundation and basement with M sand in layer of not more than 15cm thick including all charges etc.complete |
| 3 | Refilling in foundation and basement with excavated eartth in layer of not more than 15cm thick including all charges etc.complete |
| 4 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete |
| 5 | Basement |
| 6 | Above basement |
| 7 | Below Ground Level |
| 8 | Above Ground Level |
| 9 | Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works |
| 10 | Basement |
| 11 | Above basement |
| 12 | supply and applying of two caoat of putty of 3mm thick overthe exposed Rcc srface of ceiling including fininshing the joint smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing . |
| 13 | Plastering with cement mortar 1:5 mixto12mmthick including cost and conveyance of all materials to site and all labour charges etc completefor10 Sqm. |
| 14 | weathering course with Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc. |
| 15 | Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three Sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight. |
| 16 | Paving the floor with best quality Vetrified (Such as Morbonite) Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. |
| 17 | Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick |
| 18 | Dadooing of walls with colour glazed tiles of size150x150x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete. |
| 19 | Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete |
| 20 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). |
| 21 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and approved colour over a priming coat including through scrapping, clean removal of dirt and including necessary plaster of pairs putty, wherever required etc complete complying with standard specification |
| 22 | Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete |
| 23 | Door D (1.10x2.10m) |
| 24 | Door D1 (0.75x2.10m) |
| 25 | ROLLING SHUTTER |
| 26 | Window W (1.20x1.30m) |
| 27 | Window W1 (1.50x1.30m) |
| 28 | Labour charges for fixing dooralong with frames in position etc., complete |
| 29 | Labour charges for fixing steel windowsalong with frames in position etc., complete |
| 30 | Supplying & fixingwith cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 |
| 31 | Supplying and Fixing in position of best quality make White glazed wash basin of size 550x 400mm |
| 32 | Supplying and fixing in position of Indian Type water closet 580x440mm of approved qualtiy |
| 33 | European water closet with all fittings and 10 lit capacity flushing tank |
| 34 | Supplying and fixing of RCC jolly of size 0.45x 0.45m including all charges etc complete |
| 35 | Supplying and fixingP.V.C rainwater down fall pipe of 110mm dia |
| 36 | Supplying and fixing of Bevelled Edge Mirror of size 600x450mm with ply wood back and aluminum beading complete complying with standard specification |
| 37 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith3 mm thick Hylum sheet cover withTW boxAnd 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 18 |
| 38 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith150 mm X 100 mm X 113 mm TW switch boxwith3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plugwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour forconcealed PVCplugpointSD 36 |
| 39 | Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade on 7/20GI bearer wire for service connection mains SD 64 |
| 40 | Supply and run of 2 X 1.5 sq.mm(22 / 0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade in 25 mm dia GI pipe( Class \" B \" ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69 |
| 41 | Supply and fixing of CFL bulb SD 80 |
| 42 | Supply and fixing of single box type 4\"40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube SD88 |
| 43 | Supply and fixing of 1200 mm ( 48\") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mmdown rod on the existing clamp. SD 110 |
| 44 | Supply and fixing of 1200 mm ( 48\") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mmdown rod on the existing clamp. SD 110 |
| 45 | Supply and fixing of TNEB Meter boardSD 125 |
| 46 | GeoligicalInvestigation Charges |
| 47 | Drilling of 180 mm dia deep bore well in hard rock area(Outer Pipe Length) including labour charges and transportation charges |
| 48 | Drilling of 150 mm dia deep bore well in hard rock area including labour charges and transportation charges |
| 49 | Supply and Delivery of 150mmdia 6KSC Casing Pipe |
| 50 | Supply and delivery ofSinglephaseSubmersible pump set of duty condition 20 Lpmx80m headMotor |
| 51 | Supply and delivery ofSinglephase1HP Pannel Board |
| 52 | Supply and delivery of 32mm UPVC Pipe |
| 53 | Supply and delivery of 2.5 sqmm 3 core copper cable |
| 54 | Supply and delivery of 1000lit. Capacity HDPE tank As per IS 12701/1996 |
| 55 | Labour charges for erection of new submersible pump set in the bore well and commissioning |
| 56 | Supply and delivery of 32mm PVC pipe etc. complete. |
