|
| 1 | DISMANTLING WORKS |
| 2 | Demolishing existing masonry work including toilet tails with backing stacking of serviceable materials as directed and carting away all materials outside Owner\"s premises including all labor, tools etc complete for all locations and levels as directed and instructed by Architect. Note:- No extra payment to be made for removing demolished debris from site. |
| 3 | Removing of existing door for rectification. Removing the existing doors of double palls and stack it well for reuseing in footer. |
| 4 | Removal/dismantling of Plumbing / Drainage Pipes & Fittings and existing Electrical work |
| 5 | BRICK WORKS ,Water Proofing & PEST CONTROL |
| 6 | Providing and constructing 6\" thk Burnt Brick wall , with 1:4 CM of ISI 53 grade Portland cement with necessary scaffolding, lead lifts etc. to close the door opening of toilet entrance and proposed lab area entrance from back side stair landing area of the building. work at all levels in cement mortar 1:4 using standard size of 300x100 (ht), including staging, curing, raking of joints for all lifts etc. complete and as directed. Rate shall include providing R.C. Binder in mix proportion 1:2:4, 75mm thick reinforced with 2 nos. of 8 mm dia Fe 415 bars with 8 mm dia TOR steel tie bars at 300 mm c/c, RCC binders to be at every 1 meter interval from floor level, including cost of reinforcement and formwork, plaster, scaffolding, all labor, etc., all complete and as directed. |
| 7 | Providing pest control and anti termite treatment by appointing a specializedtreatment Providing pest control and anti termite treatments by appointing a specialized agency as per the specifications mentioned by the Breuer of Indian Standards |
| 8 | Providing and laying water proofing treatment for toilet and pantry wall complete as per manufacturer\"s specifications and as directed by architect. |
| 9 | FLOORING AND CLADDING WORKS |
| 10 | TOILET FLOOR:-providing and fixing anti skit vitrified tiles of approved make 1st quality of manufacturer like Kajaria, Johnson ,Bell as specified by Architect with necessary bedding materials 1:3 cement ,sand mortar, filing of joints, with grouting ,curing etc all complete.Basic rate of tile rs 60/- Size : 600 x600 mm |
| 11 | TOILETWALL:providing and fixing vitrified tiles of approved make 1st quality of manufacturer like Kajaria, Johnson ,Bell as specified by Architect with necessary bedding materials 1:3 cement ,sand mortar, filing of joints, with grouting ,curing etc all complete.Basic rate of tile rs 75/- Size : 600 x300 mm |
| 12 | Provisind and appling hand polishing on existing Mosaic/concrete floors. Polishing by grinding machin with necessery stone and chemical and polishing the surface to remove all stain and dust & achieve a glossy finish. |
| 13 | Providing protection to existing tile on flooring with POP/Plastic sheet/or fome protection from damage during site execution work, |
| 14 | Providing and placing doormat of approved code and make as per the requirement at site. |
| 15 | PLUMBING WORKS |
| 16 | Providing entire plumbing and Sanitary supply and drainage piping including all necessary fittings as directed by the architect - Plumbing in PVC ISI grade pipes and sanitary works in PVC ISI grade pipes with floor traps, chilly traps etc for Toilet. |
| 17 | Providing and fixing European Water Closetwall mountedincluding Slim Flush Tank (Make : Parryware or Hindware), Angle cock, connector, heavy seat cover,2-in -1 Bib Cock -cum - Jet Spray , etc complete. Make : ESS ESS or Jaguar |
| 18 | Providing and fixing Wash basin - medium size ( Make: Parryware or Hindware) , including basin mixer, angle cock, bottle trap as per the space availability at site. Make :ESS ESS or Jaguar |
| 19 | Supplying, fitting and fixing Half stall urinal in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. Size: 470 mm X 280 mm X 340 mm |
| 20 | Providing and fixing hand held ablution fitting (health faucet) with one metre long flexible tube and wall hook, all complete of following make.(or equal approved) |
| 21 | Providing and fixing PVC finish Paper Towel Dispenser including cutting and making good the walls complete of following make and type: (or equal approved) |
| 22 | Providing and fixing wall mounted liquid soap dispenser of with spout, shank, including cutting and making good the walls complete of following make and type: (or equal approved) |
| 23 | \"Providing and fixing wall mounted anti slip grab bar for ealderly patients or anyone who may need mobility support when maneuvering on or off of the toilet. |
| 24 | Providing and fixing stainless steel coat hooks including cutting and making good the walls complete of following make and type: (or equal approved) |
| 25 | EXTERNAL METAL WORKS/SHUTTER |
| 26 | Providing and erecting in position including assembling, fitting and fixing Gear type hand operated rolling shutter of approved make MS powder coated of approved colour with minimum 20 microns rolling shutter made out of rolling grill of 150 mm x 75 mm (20 gauge) MS links and link openings of 115 x 45 mm together with 16 gauge and small links with 10 mm dia. hard drawn seamless tubes and the end sealed with mild steel clips etc.conforming to IS specification.The side MS guide channel shall be 75 x 25 mm (10 gauge) welded lugs fixed to wall / Column, 10 gauge reinforced lock plate reverted to 40 x 40 x 6 mm angle with 40 x 40 x 6 mm stiffener welded on rear side with necessary locking arrangements for both sides including pipe roller conforming to IS 4454, gear box, hood all complete including top cover / hood for rolling shutter as per specification for various structural openings, etc. complete,as directed. Note : Clear structural opening will be measured and paid for.The hood/ hoodcoverarea will notbemeasured separately. Note the rate to be inclusive of necessary ply boxing to hold the rolling shutter. |
| 27 | ELECTRICAL WORK |
| 28 | Providing and fixing 1.0 ,2.0,2.5 and 4.0 sq.mm FRLS | FR grade cables of ISI grade standard make ofFinolex,Havels,Kalinga make with 12mm dia GI conduit as per drawings including junction boxes and other accessories .The Cost to include Circuit Wiring, Point Wiring,Voice and Data Cat5 cables as per standard specification, etc. for light fixtures and power receptacles as indicated in the Electrical / Lighting layout. The item also includes Handling, Assembling, fitting, testing, fixing all fixtures with approved connectors and accessories.All MCB,MCCB,RCB,ELCB,bus bar ,Circuit breaker in the Distribution box to be of ISI grade Standard make of Legrand,Havels,bentec . Complete DBs shall be flush mounted with walls.DBs shall be suitable for single/Three phase operation.The Cost to include DB board . The Cost for GI Conduits to be seperate all light fixtures will be provided by the Client . |
| 29 | LIGHTING FIXTURE AND FANS - Supply installation, connection & testing following lighting fixture as per specification complete with lamp,holders,electronic ballast /driver, supports,hanging&fixing materials,etc.including all mounting accessories complete in all respect.havells,philips, wipro or equivalent make. |
| 30 | Fixture Type (Recessed) LED Downlight fixture15 watt (4000k) |
| 31 | Fixture Type (Recessed) LED COV Light fixture12 watt (3000/4000k) |
| 32 | Fixture Type (Recessed) LED COV Light fixture 6 watt (3000/4000k) |
| 33 | Fixture Type (PENDENT) LED Pendent Light fixture15 watt. |
| 34 | Fixture Type (Surface) LED Picture wall Light fixture14 watt IP65. |
| 35 | Fixture Type (Examination lights) directly illuminate specific areas of a patient\"s body during diagnostic procedures and general examination. Single Dome.Reflector,single halogen bulb of 12V- |
| 36 | Fixture Type (Surface) LED Strip Light fixture10 watt/meter (3000/4000k) |
| 37 | Supply installation, connection & testing of ceiling /cabin fan with all accessores.56\" sweep ceiling fan. |
| 38 | Supply installation, connection & testing of wall /glass mounted exhaust fan, with louvers and all fixing accessories. |
| 39 | DOORS AND WINDOWS |
| 40 | Providing & fixing 12mm NonToughened glass panels (for main Entranceand fix glazing) fixed with 3\" High Fish Section in Bright Silver Anodized Aluminum section in Matt finish. The junction between glass and glass, channel and glass shall be sealed with proper all weather silicon sealants. Glass edges to be machine polished. Suitable supports to be taken from top using 2\" x 2\" (50mm x 50mm) Salwood sections @ 2\"0\" c/c vertically & horizontally. With all necessery hardwer. |
| 41 | Remodeling and fixing in position existing wooden panel doors using necessary wood section jointer of appropriate sizes as per the requirement to fix the palls. The door shall be finished on both sides with wooden polish or paint as approve inclusive of locks, door closer of godrej make code no.1939, with SS Dorset make lock code ETTO.SS as per the spec sheet. |
| 42 | Remodeling and fixing in position existing wooden panel Windows using necessary wood section jointer of appropriate sizes as per the requirement to fix the shutter. The windows shall be finished on both sides with wooden polish or paint as approve inclusive of all necessery hardwar. |
| 43 | Providing and fixing in position flush door for Toilet using 35mm thk ISI grade flush doorsof sizes as per the drawing. The door shall be finished on both sides with 1mm thick laminate inclusive of locks, door closer of godrej make code no.1939, with SS cylindrical lock andEngaged/Vacant Privacy Latch as per the spec sheet. Door frame to be made of 19 mm thk jet black granite and edges to be made half round as per drawing. All inclusive of finishing etc. |
| 44 | FALSE CEILING |
| 45 | Providing and fixing 12mm thk. Regular gypsum board false ceiling with G.I section frame work with main runners at 600mm c/c. Board and section frame work to be of India gypsum make. Cost to include cut outs made for light and ac fixtures. |
| 46 | PAINTING WORK. |
| 47 | Providing and painting enamel paint for Rolling Shutter as per approved shade and make. Both sides of the shutter is considered |
| 48 | POP PUNNINING Providing and applying 1st quality P.O.P punning on walls and columns (avg 12mm thick). The rate shall include scrapping, levelling and all complite. |
| 49 | Providing and applying three coats of luster paint of desired shade, of Asian / Berger / ICI paints or equivalent on internal wall surfaces wherever required at all heights to give an even and uniform shade, applied over a coat of primer or as per manufacturer specification fully to give a smooth and even surfaceincluding thoroughly brushingthe surface free from water / mortar dropping and other foreign matter and sand papered smooth, complete as per manufacturers specifications and as directed.(Note The quantity might change depending up on the Detail Drawing) For celling. |
| 50 | BASE COAT;Providing and applying base coat behind the Wallpaper for pasting. |
| 51 | Providing & applying 3 coats of Lustre paint of approved quality & shade by sand papering the surface, applying one coat of primer, prepare the surface with two coats of full putty, sand papering again, repeating a coat of primer, applying one coat of lustre paint, touching up with putty & applying two final roller coats of lustre paint, to external surface by cleaning scrapping, smooth filling crevices, scaffolding etc.(For wall ). |
| 52 | providing and installing wall paper |
| 53 | SITE CARPENTRY WORKS |
| 54 | Providing and fixing PLY partition frame work made of 50MM X50MM aluminiumspaced at 2\"0\" c/c vertically & horizontally. Additional member shall be provided at skirting, top band, grooves & at places where two different materials are combined. Necessary supportsshould be taken in to account for stability. |
| 55 | Providing and fixing PLY paneling on partition with 12mm ply finished with 1mm laminate. All vertical and horizontal joints in ply to be filled with metal paste complete and as directed. |
| 56 | Louver paneling on thewaiting area back area made with25/25 louver bar of wood/ aluminum as per design and direction to achieve desire look. |
| 57 | RECEPTION TABLE WITHSIDE UNIT.Overall Size : 1650mm x750x 750/1050mm(H). |
| 58 | Reception table at size as per location, Table to be made of 19 mm thick ply with necessary framing , Table to have two levels, writing level at 750 mm height and transaction level at 1050mm height. Table top to be made of 40 mm thk. commercial plywood finished with 1mm thk. laminate as approved by Architects. All internal exposed edges to be applied with wooden edge banding. |
| 59 | Providing and fixing waiting bench at reception area fabricated with 19mm plywood finishedwith 1 mm laminetto all surfaces 18 inch hight as detailed out in the drawing and pu fome coushion on top surface for comfort, including all hardware fittings and fixtures complete and as directed. |
| 60 | 3 seter waiting area chair in chrome finish with /without coushion . |
| 61 | Doctor\"s consultation table size 4ft/2ft made with 19 mm ply wood as per design for dureabality with cassette unit inrtigation to provide additional storage or utility specific to medical requirment finished with approved laminet all side. |
| 62 | Radiology investigation table made of 19 mm ply wood,finish as per design. |
| 63 | patient eximination/investigation bed made of alloy steel with mattress and manual handel recliner for support. |
| 64 | LAB COUNTER with Low Height storages: Providing & constructing laminate finished storage of depth500 mm , withgranite top bottom in 19 mm thick commercial ply, back in 6 mm thick commercial ply, intermediates in 19 mm thick commercial ply shutters with framework as per drawings. All external surfaces to be finished in approved 1 mm thick laminate, with0.8 mm thick laminate on the interior surface. All exposed edges to be finished in edgbend . Rate shall be inclusive of hardwaresuch as locks, auto closing hinges for shutters, handles, door stopper, Tower bolt, SS key holes of approved make etc all complete. ( Ht 740mm) (Lab & pantry area) |
| 65 | Overhead unit:Providing & constructing laminate finished storage of depth450 mm , with top, sides & bottom in 18 mm thick commercial ply, back in 6 mm thick commercial ply, intermediates in 18 mm thick commercial ply @ 375 m c/c, shutters with framework as per drawings in 18 mm thick commercial ply. All external surfaces to be finished in approved 1 mm thick laminate, with balancing 0.8 mm thick laminate on the interior surface. All exposed edges to be finished in laminate . Rate shall be inclusive of hardwaresuch as locks, auto closing hinges for shutters, handles, door stopper, Tower bolt, SS key holes of approved make etc all complete. ( Ht 740mm).(Lab & pantry area) |
| 66 | Full Height Storage: Fabricating and fixing storages made of 19mm PLYas above |
| 67 | Electrical DB\ UPS \DVR\ panel box. made of 19mm PLYas above |
| 68 | Phlebotomy working Station.made of 19mm PLYas per design. |
| 69 | CHAIRS. |
| 70 | Receptation chair |
| 71 | Doctor\"s consultation chair. |
| 72 | Patient\"s / visitor\"s chair. |
| 73 | Lab stool |
| 74 | Phlebotomy Chair |
| 75 | MISCELLANEOUS WORKS |
| 76 | Main Cable;-25sqmm main cable along with 8G copper earthing strips. |
| 77 | UPS - 3KVA:-Single Phase 3kva externel 12 volt battary UPS, Input Voltage: 160- 300 V. of approved make with atleast 30min power back up. |
| 78 | PERFUME DISPENSER |
| 79 | HOT & COLD Water Dispencer. Bluestar. |
| 80 | Refrigerator |
| 81 | Microwave |
| 82 | Induction |
| 83 | Tea Coffee Machine |
| 84 | House keeping & Deep Clening the entair site after complition of fit out work. |
| 85 | Waiting area TV.LG LQ643 80 cm (32) AI Smart HD TV | WebOS | HDR |
| 86 | HDcamera solution |
| 87 | 1.3 MP camera |
| 88 | 16 channel DVR |
| 89 | 4 TBsurvellance hard disk for cctv recording |
| 90 | 12 Port Poe Switch |
| 91 | RJ 45 Connector for cameras |
| 92 | Supply and laying 4 pair copper cat 6 cable with PVC Conduit |
| 93 | Fixing, Programming, Testing and Commissioning charges |
| 94 | Music system |
| 95 | Ahuja/JBL Speakers |
| 96 | 60 Watts Ahuja Make Amplifier |
| 97 | Cable connectors and Patch cords |
| 98 | Speaker cable 99.99% OFC full copper cable with PVC conduit |
| 99 | Fixing,installation,testing & commisioning charges |
| 100 | Fire Alarm System |
| 101 | Systemsensor- Optical Addressable Smoke detector below false ceiling |
| 102 | Systemsensor- Optical conventional Smoke detector Above false ceiling |
| 103 | Respone Indicater |
| 104 | Conventional manual call point |
| 105 | Conventional combined Hooter |
| 106 | single loop fire Panel (4 ZONE) |
| 107 | 12v Battery for fire alarm panel |
| 108 | Supply and laying of 1.5Sqmm*2 coreFRLS cable with PVC Conduit |
| 109 | Fixing, Programming, Testing and Commissioning charges and TA , transport charges |
| 110 | Fire extinguishers |
| 111 | 2 KG type DOE certified,Co2 type Fire Extinguisher,as per IS 15222 with controll discharge mechanism fitted with Hose & Horn,applicable on Class B fire rating bearing ISI mark. |
| 112 | 4KG type DOE certified,ABCtype Fire Extinguisher,as per IS 15222 with controll discharge mechanism fitted with Hose & Horn,applicable on Class B fire rating bearing ISI mark. |
| 113 | Providing and fixing for clean agent of 5kg |
| 114 | Floor Stand for Fire Extinguisher |
| 115 | HIGH SIDE / AC EQUIPMENT SIDE :Supply of Indoor & Out door AC units as per specifications |
| 116 | High wall Split Units - 1.0TR Capacity |
| 117 | High wall Split Units - 1.5TR Capacity |
| 118 | High wall Split Units - 2.0 TR Capacity |
| 119 | LOW SIDE SCOPE - Supply, installation, testing & commissioning refrigerant liquid line and insulated suction line piping with Rubber nitrile insulation as per specification |
| 120 | High wall Split Units - 1.0TR Capacity |
| 121 | High wall Split Units - 1.5/2/2.5TR Capacity |
| 122 | LOW SIDE SCOPE - Supply, installation, testing & commissioning of electrical power & controlcabling between condensing unit & evaporator unit |
| 123 | High wall Split Units - 1.0TR Capacity |
| 124 | High wall Split Units - 1.5TR Capacity |
| 125 | High wall Split Units - 2.0 TR Capacity |
| 126 | LOW SIDE SCOPE - Supply and fixing of condensate drain piping for Indoor units with pvc pipe &fittings with necessary clamps & supports shall be provided as per specification or requirement |
| 127 | High wall Split Units - 1.5/2/2.5TR Capacity |
| 128 | LOW SIDE SCOPE - CDS frame work - ODU stand - Supply, fabrication and installation of MS base frameduly painted/powder cotted for outdoor units. |
| 129 | High wall Split Units - 1.0TR Capacity |
| 130 | High wall Split Units - 1.5TR Capacity |
| 131 | High wall Split Units - 2.0 TR Capacity |
| 132 | LOW SIDE SCOPE - Earthing - Supply, Installation, testing & commissioning of electrical earthing to Indoor & Outdoor Units as per specifications. |
| 133 | Split Units - 1.5/2/2.5TR Capacity |
| 134 | LOW SIDE SCOPE - Installation , pressure testing , vaccumising, Gas charging ,testing & commissioning of AC unitsas per spec. |
| 135 | Split Units - 1.0TR Capacity |
| 136 | Split Units - 1.5TR Capacity |
| 137 | Split Units - 2.0 TR Capacity |
