|
| 1 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 2 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 3 | 300x16 mm |
| 4 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 5 | 300x10 mm |
| 6 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 7 | Twin rubber stopper |
| 8 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main ’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x 28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making |
| 9 | Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. |
| 10 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 11 | Water thinnable cement primer |
| 12 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: |
| 13 | Two or more coats on new work. |
| 14 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 15 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. |
| 16 | Pre-laminated particle board with decorative lamination on both sides. |
| 17 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 18 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 19 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 20 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 21 | With stainless steel cover plate minimum 1.25 mm thickness. |
| 22 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 23 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. |
| 24 | Anodized (AC 15) aluminium |
| 25 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge |
| 26 | Anodized (AC 15 ) aluminium |
| 27 | Fixing of aluminum partitions and doors after making to required sizes and sections as per the drawingfrom the available material of aluminum sections , particle board, glass panes, neoprene gasket and snap on beading including fixing with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/Neoprene felt etc, aluminum sections shall be smooth, rust free, straight , mitred and jointed mechanically wherever required all complete as per the architectural drawings and the directions of the Engineer-in-charge. (The material for the required quantityis availableon as is where is basis in stacked condition wiil be supplied by the departement free of cost. Finished area of partition is measured for payment) |
| 28 | Providing and fixing 8mm thick cement based bison particle board for panelling in partitions, doors, etc., with necessary screws etc complete as per the directions of the Engineer in charge,(frame work to be paid seperately): |
| 29 | Removing/dismantling of MS Grill/Window shutters/MS angle frame work for AC\"s in windows of size 1.00mx1.20mincluding stacking of material etc., all complete as directed by the Engineer-in-charge. |
| 30 | Removal of black stains, marks on burnt walls/ceilings by scrapping including cleaning of walls. The cost includes provision of sheets for covering of equipment, scrappers, sand papers, rent for ladders etc., all complete as directed by the Engineer-in-charge. |
| 31 | Removal of black stains,burnt marks from the top face of the existing false flooring tiles by scrapping, scrubbing including dusting off and cleaning of frames and partition sections. The rate includes the cost of liquids,detergents,sand papers, brushes etc., required for cleaning of tiles, floors,equipment, etc., all complete as directed by the Engineer-in-charge. |
