|
| 1 | Earth work in foundation |
| 2 | sand filling in foundation |
| 3 | laying of PCC in 1:4:8 cement c sand and stone ballast in foundation |
| 4 | R.C.C . Work in cement coarse sand and 20mm gauge stone gride in proportion 1:1.5:3 in columns foundation and grade beamexcluding supply of reinforcement and also including supply of all material labour T&P centeringand shuttering etc. |
| 5 | M-150 brick work in 1:6 cement and fine sand mortor in foundation to plinth |
| 6 | R.C.C . Work in cement coarse sand and 20mm gauge stone gride in proportion1:1.5:3 in plinth beam excluding supply of reinforcement and also including supply of all material labour T&P centeringand shuttering etc. |
| 7 | M.S. Work in R.C.C. Incluing supply of steel its wastage and hooks and authorised overlap |
| 8 | earth work in filling by cartage of earth from 1km by tractor trolly |
| 9 | earth work in excavation DSR 2.1 |
| 10 | Cartage 1.00 km.(217.55x0.739)= 139.01 |
| 11 | sand filling in foundation and floor |
| 12 | laying of PCC in 1:4:8 cement fine sand and 40mm stone ballast in base concrete in foundation |
| 13 | 12mm thick plaster work in 1:4 cement and fine sand mortor DSR 13.1.1 |
| 14 | 4cm thick CC flooor in 1:1.5:3 cement c sand and 20mm stone grit in appron |
| 15 | P/applyingwhite cement based putty of avg thickness 1mm complete |
| 16 | finishing wall with tex tured exterior paint of required shade ( two or more coad applied ) @3.28 lt /10sqm over and including priming coat at the @2.20kg per10sqm |
| 17 | M.S. steel work in built up tubular (round ,squire or ractangular hollow tupes etc. ) trusses etc. including cutting ,hoihting fixing in position and appling priming coat of appd. Steel primer, including welding and bolted with special shaped waser etc. comp. in all respect as per D.S.R. Code No. 10.16.1 for hot finished welded type tubes |
| 18 | Providing corrugated G.S. Sheet Roofing including vertical /curved surface with polymer coated J or L hooks bolt and nut 0.80 mm thick with zink coatingnot less than 275 gram/sqm.(coloured profile sheet make Zindal, Tata, Nippon) As per S.I.No.12.1.2 D.S.R. page 201 |
| 19 | Supply of self threading screws with G.I. and bitumen washer (as per minium local market rate) |
| 20 | painting charge of M.S pipe and all structure(as per minium local market rate) |
| 21 | P/Erecting and place identification retro reflectorised sign.as per IRC 67 made of high intesity grade shetting , the Retro reflective shetting shall be tested for a certificated of having the shetting tested for coefficient of retro reflection day time coller and luminanc etc as per P.W.D. Lucknow S.O.R. Item No 19 MoRTH -801(8.5) page No 57 ( Including photo) |
