|
| 1 | Dismantling existing plaster including disposal of refuse as directed by the engineer incharge with in a distance of 60m (200feet) |
| 2 | Dismantlingcement concrete or brick or granolathic floor including base concrete and including stacking of dismantled material as directed by the engineer incharge with in a distance of 60 meter(200ft) |
| 3 | M-150 Class brick work in 1:4 cement and Coarse sandmortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (S.I. No.305A) |
| 4 | Concrete with 4 cm. Gauge Stone ballast fine sand nd cement in proportion of 12:6:1 in foundation and under floor and includingsupply of II material labour and T&P etc required for proper completion of the work. S.I. no 275 |
| 5 | Supply and fixing of Kota stone in flooring 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polishincluding supply of all materials, labour,Tools & plants etc. required for proper completion of the work as si no14.22 |
| 6 | Supply and fixing 20 mm thick Kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work.as si no 14.24 |
| 7 | 12 mm Cement plaster with cement mortar in proportion of 1:3 cement & coarse sand ofsingle coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (S.I. No. 582a) |
| 8 | Supply and fixing 32 mm thick commercial flush door shutter confirming is 2202part1including fixing and adjustment as si no 470a |
| 9 | cost of isi marked aluminium fitting with screw as si no474 |
| 10 | Supply & fixing glavinised mosquito proof heavy quality iron wire gauge or expanded metal heavy quality over window and including supply of cp teak wood batten 8x1cm /flat iron 25mmx4mmand including supply of necessary screw all material labour t & p etc required for proper comp of workas si no 455 |
| 11 | renewing panes of glass in door window&ventilatoror fixing in the new work with 3mm thick glass pans fixedwith brads &putty inculding supply 0f all material labour t&p as si no 806 |
| 12 | Supply and fixing 6 mm. (1/4\") China white glazed tiles in flooring of in skirting of dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and plants. |
| 13 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold water Supply, including all, CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge, 20 mm dia nominal outer dia pipe |
| 14 | 32 mm dia nominal outer dia pipe |
| 15 | Providing and fixing C.P. Brass long nose bib cock of approved quality confirming to ISI standards and weighing not less then 810 grm. 15 Nominal bore |
| 16 | Providing and fixing C.P. Brass bib cock of approved quality confirming to IS: 8931 15 mm Nominal bore |
| 17 | Providing and fixing C.P. Brass angle valve for basin mixer abd geysar points of approved quality confirming to IS:893115 mm. Nominal Bore |
| 18 | Providing and placing on terrace (at all floor levels) polythylene water storage tank ISI: 12701 marked (Sintex of equlvalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as perdirection of Engineer-in-Charge. |
| 19 | Providing and fixing water closet squatting pan (indian type W.C. Pan) with 100 mm. sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern, including flush pipe, manully controlled device (handle lever confirming t SI : 7231, with all fittings and fixures complete, including cutting and making good the walls and floors wherever equired. |
| 20 | Providing and fixing wash basin with C.I. krackets, 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever required.White vetreous china wash basin size 630×450 mm. with a pair of 15 mm. C.P. brass pillar taps. |
| 21 | Providing and fixing 600×450 mm. beveled edge mirror of superior glass (of approved quality) complete with 6 mm. thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 22 | providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming ti IS : 13592 Type A, Including jointing with seal ring thermal expansion, Single socketed pipes. 110 mm Diameter |
| 23 | Painting roof or other iron work in large areas with one coat priming and two coat of approved (above one Sq. Meter) Paint (British antesol of equavalent) including Supply of all materials, labour, tools & Plants etc. required for proper completion of the work. Paint to be used should confirm the ISI No 103-109. |
| 24 | Distempring (Two Coat) with oil bound distemper of approved beand and manufacture and of required shade on undecoratewall surface to give an even shade over and including a priming amnufacture such as Berger, J & N, Shalimar, Asian Paint after thorougly brushing the surface free from mortar drooping and other foreign matters and also sand prepared smooth including supply of all materials, labour, Tools & Plants etc, required for proprer completion of the work SI No 649, 650. |
| 25 | Finishing wall with weather coat by premium acrylic exterior paint applied @ 1.67 Ltr/10 Sqm (Asian of Berger Brand) of approved make and quality on wall with two of more coat to give an even shade including a priming coat with cement premer of approved brand and manufacturer exterior premer applied @ 2.20 kg/10 Sqm after throughly brushing the surface free from mortar dropping and other foreign matters and sand prepared smooth including supply of all materials, labour, Tools & Plants etc, required for proper completion of the work. Si No 15.23 New Item. |
| 26 | Providing wall putty on old surface with approved quality material of Berger/J.K./Birla og Similar make 2 Coats. |
| 27 | Providning and fixing rectro reflective sign board. |
