Tender For Repair And Maintenance And Colour Wash Farmer Rest House At N M Y Meerut - Scraping Old White Or Colour Wash Including Disposal Of Refuse As Directed By The Enginner In Charge With In A 60Mt Si No 708 2 Dismentling Of Existing Plaster Includi, meerut-Uttar Pradesh

Tender For Repair And Maintenance And Colour Wash Farmer Rest House At N M Y Meerut - Scraping old white or colour wash including disposal of refuse as directed by the Enginner in charge with in a 60mt SI NO 708 2 Dismentling of existing plaster including disposal of refuse as directed by E / I .(S.I.No-706) 3 12 mm thick plaster with cement and appro- -ved coarse sand mortar in 1:4 over brick 1 cm including supply of all materials, labour T & P etc. required for proper completion of the work.SI NO 584A 4 Providing wall puttywith approved quality material of beager/ J.K. birla or similar make 2 coatSI NO 662 New item 5 Providing wall puttyon old surface with approved quality material of beager/ J.K. birla or similar make 2 coatSI NO 662 New Item 6 Finishing wall with two coat of weather coat of approved quality on superviouslysurface with this paint give an even shade including supply of all materials labour T&P etc si.New Item page no 23 SI No 662 New Item 7 Distempering ( Two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even cement primer of approved brand and manufacture such as berger, J&N shalimar,asian paint after thoroughtly brushing the surface free from mortar dropping and other foreign matter and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all mateirals lobour tools & plants etc. required for proper completion of the work. si no 649+650 8 Supply and fixing Galvanized Mosquitos proof heavy quality S.S Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm x 1cm. (3x3/8) flat iron 25 mm x 4mm and including supply of necessary screws all materials, labour, Tools & Plants etc. required for proper completion of the work. SI No 455 9 Supply and fixing 32 mm. thick Commercial flush door shutters conforming of I.S. 2202 Part-1(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles and springs (excluding cost of fitting) SI No. 470A 10 Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) SI No 473 11 Paintingor varnishing work in small areas or new wood work withone coat (upto one square metre) ready mixed priming paint and 2 coat of superior quality ready mixed paint or varnish including supply of all materials. Labour tools & plants etc required for propercompletion of the work paint to be used should confirm the ISI no 103-1950 S.I.No. 641+642 12 Paintingor varnishing Two Coat on PreviouslyPainted old wooden or iron workincluding supply of all materials. Labour tools & plants etc required for propercompletion of the work paint to be used should confirm the S.I.No. 642+643 13 M-150brick work in 1:4 cement and c. sand mortar for one brick thick wall in superstructure including supply of all materials labour T&P etc. required for proper completion of the work si no 305A + 310 +310a 14 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, manually controlleddevice (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredWhite glazed earthen ware (Indian type)/Neycer W.C Pn 580 mm Dia.SI No 21.12 15 Providing and fixing White vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required S.I No 21.13 16 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked (Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge. SI No 21.11 17 Providing and fixing wash basin with C.I brackets] 15 mm CP brass pillar taps, 32 mm C.P brass waste of standard pattern, Including painting of fitting and brackets, cutting and making good the walls wherever require. White Viterous China was basin size 630x450 mm with a pair of 15 mm C.P brass pillar taps Si No 21.16 18 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. SI No 21.25 19 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stablity for hot & cold water supply, Including all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed Work, including cutting chases and making good the wall etc.SI No 21.02Si No 21.02 A 15 mm dia nominal outer dia pipes 20 Si No 21.02 B 20 mm dia Nominal outer dia pipes 21 Si No 21.02 D 32 mm dia Nominal outer dia pipes 22 Providing and fixing C.P. Brass bib cock of approved quality confirming to Is 8931 SI No 21.07 23 Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. SI 21.04 B 20 mm nominal bore SI No 21.05SI No 21.05 A 15 mm nominal bore 24 SI No 21.05 B 20 mm nominal bore 25 Providing and fixing on wall face unplasticisedRigid PVC rain water pipes conforming to IS: 13592 Type A, Including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. SI 19.02 Si No 730a 100 mm diameter 26 Renewing panes of glass in door, window & ventilators or fixing in the new work with 3 mm, thick glasspanes fixed with brads & putty including supply of all materials, labour, tools & Plants, required for proper completion of work. SI No 806

INR 944 /-

INR 40000.0 /-

INR 3.90 Lakhs /-