Tender For Providing Plumbing, Elv, Fire Fighting System, Elevator, Civil Works, Furniture And Signages Works For Government Hospital Marwad In Daman District., Daman-Daman And Diu

TDR : 48565939

Tender Notice
BOQ

Expired

Daman , Daman And Diu

Tender Brief : Tender For Providing Plumbing, Elv, Fire Fighting System, Elevator, Civil Works, Furniture And Signages Works For Government Hospital Marwad In Daman District.

Document Fees
₹ 1500 /-

EMD
₹ 4745893.0 /-

Tender Value
₹ 37.45 Crore /-

Submission Date
30-04-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil work others
2	Sec 1.0 Hot Water Plant: Supplying, installing, testing and commissioning of Electrically Operated Air-to-Water Heat Pump Hot Water System capable of heat output of minimum 3.64Kw @ COP OF MIN 3.6 producing Hot water up to 55°C, at ambient temperature of 12°C to 55°C. Heat pump should have an IPX4 compatible control panel, designed and built in manufacturer\"s factory and compliant to norms for the same and compatible to support 8 units in parallel. Inbuilt 4 Ways valve for auto defrost function. The heat pump shall have an operational noise level of less than or equal to 65 dB(A). Model should be with tube in tube type heat exchanger Comprising of helical rotary twin compressors with direct drive motor (the compressor speed shall not exceed 3000 RPM) with shell and tube type plain tube chiller as well as shell & insulated tube type integrally finned condenser, at working efficiency of minimum 80%, having heating capacity up to 60 degree centigrade, capable to withstand up to 300 ppm water hardness. The heat pump package shall include vibration mountings, copper refrigerant piping as per the latest applicable B.I.S. codes and standards, full refrigerant charge using CFC free gas, system control wiring and accessories, installed on a fabricated mild steel base frame assembled to form a compact assembly,complete with micro-processor based control panel comprising of adaptive controls, indication lights, Star-Delta starters, over-load and under-loadprotection, TPN isolator for termination of incoming power cable, necessary control wiring, disconnect switch, grooved (Victaulic couplings at inlet and outlet of both heat exchangers, DP switches for both heat exchangers, vibration isolation arrangements electrical panel with starter for Heat Pumps, testing of all systems post installation at Minimum Wet Bulb Temperature of 17.7 degree Celsius in January to deliver hot water at 55 degree Celsius. The scope also includes commissioning of the entire system, commissioning certificate in the name of the Engineer-in-charge, etc. complete as per manufacturing standards and to the complete satisfaction of the Engineer-in-charge. The scope includes pre-insulated S.S. storage tanksor M.S. storage tanks with ceramic lining, of capacity as mentioned below, including making inlet, outlet heavy gauge C.P. connection, temperature guages (at inlet and outlet of storage tank). The Storage Tanks duly painted with two coats of Red-Oxide and having PUF / Rockwool insulation, outer cladding of 22 guage Aluminum Sheet, control valves at inlet and outlet of Water tank, M.S. supports for the tanks with M.S. base plate, bolts and nuts for fastening the stands and support to Cement concrete blocks, testing the tanks and the entire hot water system at a constant water pressure of 5.0 Bar (50 Mtrs) each, testing of the entire system for a constant flow of hot water at 55 degree Celcius during peak winter when the Wet Bulb Temperature is 17.7 degree Celcius. Make: A O Smith. FOR BLOCKC: Total System Capacity: 200 LPH; Heat Pump HWS: 200 LPH (peak load) with 300 Ltr capacity storage tank. Heat pumps of 1.1 kW (output capacity - 3.64 KW), electrical starter panels, level sensors, temperature sensors, thermostat, temperature gauges, pressure gauge, interconnecting G.I. \"C\" class pipes with nitrile rubber cladding and aluminium cladding, complete.
3	WATER COOLERS:Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.
4	WATER COOLERS:Conveyance charges including loading / unloading for Water Cooler from store to site (I) Local up to 10 Km
5	WATER COOLERS:Supplying and erecting approved make water filter having outerbody of tough polycarbonate with fitter cartridge having filter to trap micro elementswith coupling suitable for erection on pipe line.
6	WATER COOLERS:Supplying and erecting water filter cum purifier with ultra violate technology. (Aquaguard / waterdoc model or equivalent symphony/ crystal/videocon model)
7	LEVEL SENSORS:Supplying & erecting approved make Automatic liquid level controller 6A.as per instruction of Engineer in charge on site complete with wiring connection with existing wires , with copper conductor from pump to upper and lower tank.
8	4.00 ELV SYSTEMSSec.1.0 Telephone and Data NetworkingProviding and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceilingerected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed.25 mm
9	Tag Blocks - Multipair Telephone Cable TerminationSupply & fixing of 100 pair MDF unit with required modules in a fabricated CRCA powder coated junction box of size 450x250x100 with two no. of pad-lock, provision for earthing.
10	Cabling - Multipair CablesSupplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs & wrapped with FR PVC tape & sheathed with FR PVC or HFFR outer jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos. of pairs. With necessary connections.AConductor Size 0.5 mm.(b)Armoured. (Jelly Filled)(3)Fifty Pairs.
11	Telephone / Data Networking CablingSupplying & erecting approved make LAN cable of following size in existing pipe as per direction.[C] CAT - 6
12	Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge.(8) Modem Jack for Computer Open RJ-45.Cat. III.
13	Supplying, installation, testing and commissioning of UTP CAT6 24 ports capacity gigaspeed patch panel, all ports loaded with individual RJ-45 IOs. as per technical specification etc. as required.
14	Supplying, installation, testing and commissioning of UTP CAT6 RJ45 ethernet patch cord - 7 feet as per technical specification etc. as required.
15	Supplying, installation, testing and commissioning of UTP CAT6 RJ45 ethernet patch cord - 3 feet as per technical specification etc. as required.
16	Data Networking - Fiber Optic Cable and ComponentsSupplying, installation, testing and commissioning of outdoor 12 core armoured single mode fiber optic cable for outdoor connectivity where ever required in prelaid conduits / RCC hume pipes/HDPE/DWC, whichever maybe available etc. as per technical specification etc. as required.
17	Supplying, installation, testing and commissioning of 19\" rack mounting type fiber shelf for assembly/termination of minimum 24 cores of singlemode ofc cable for LC style components, for optical splicing and provision for storage of pigtails and splices, equipped with adaptors, adaptor plates and any other such all necessary hardware for proper dressing and management of fiber optic cable etc. as required. Any blank adaptor positions must be suitably masked for restricting dust entry etc. as per technical specification etc. as required.
18	Supplying, installation, testing and commissioning of 19\" rack mounting type fiber shelf for assembly/termination of minimum 12 cores of singlemode ofc cable for LC style components, for optical splicing and provision for storage of pigtails and splices, equipped with adaptors, adaptor plates and any other such all necessary hardware for proper dressing and management of fiber optic cable etc. as required. Any blank adaptor positions must be suitably masked for restricting dust entry etc. as per technical specification etc. as required.
19	Supplying, Splicing , testing and commissioning of LC type single mode pre-terminated pigtail 1mtr as per tender specification etc. as per technical specification etc. as required.
20	Supplying, Installation, testing and commissioning of LC-LC single mode duplex fiber optic patch cord 1mtr. as per technical specification etc. as required.
21	Supplying, installation, testing and commissioning of Networking enclosure - Floor mounted, 19\" mounting frame, usable height 24U, 600mmW x 600mmD etc. as per technical specification etc. as required.
22	Supplying, installation, testing and commissioning of 42U Floor standing 19\" networking enclosure as per specification and complete with all accessories. (upto size - 800mmW x 1000mmD)as required. (along with horizontal cable manager & vertical cable manager, PDU with minimum 12 Nos. 16 Amp socket, as per technical specification etc. as required.
23	Active Components- Data & Voice NetworkingTYPE-1Supplying, installtion, testing and commissioning of Layer 3 features switch: 16 # port 10G SFP+ With redudant power supply & standard mouting hardware & accessories. Core Switch for Server room, as per technical specification etc. as required.
24	TYPE-2Supplying, installation, testing and commissioning of Layer 2 Fully manageable networking switch, 24 # 10/100/1000Tx ports, all 24 ports shall be capable of providing PoE+ as per 802.3at, minimum 2 SFP+ ports. as per technical specification etc. as required.
25	TYPE-3Supplying, installation, testing and commissioning of Layer 2 Fully manageable networking switch, 24 # 10/100/1000Tx ports, minimum 2 SFP+ ports as per technical specification etc. as required.
26	TYPE-4Supplying, installation, testing and commissioning of Layer 2 Fully manageable networking switch, 48 # 10/100/1000Tx ports, all 48 ports shall be capable of providing PoE+ as per 802.3at, minimum 2 SFP+ ports. as per technical specification etc. as required.
27	TYPE-5Supplying, installation, testing and commissioning of Layer 2 Fully manageable networking switch, 48 # 10/100/1000Tx ports, minimum 2 SFP+ ports as per technical specification etc. as required.
28	Supplying, installation, testing and commissioning of10G SFP+Single mode transceiver, 1310nm, 2Km, LC connector, inclusive of any hardware such as modules for populating SM-LC transceivers as per technical specification etc. as required.
29	Supply, Installation, Testing and Commissioning of Wireless indoor Access Point supporting Dual band with 802.11a/n/ac (5 GHz) and 802.11g/n (2.4GHz) concurrent operation with MIMO support 3x3, 3 spatial streams, One 10/100/1000 BASE-TX auto-sensing (RJ45) PoE port, as per technical specification etc. as required.
30	Supply, Installation, Testing and Commissioning of Hardware based Wireless Access Controller, License with Minimum 50 Access point and support up to 128 access point, as per tender specification etc. as required.
31	Supply, Installation, Testing and Commissioning of industry-standard intel based server, The minimum specifications required are as follows : - Processor : Quad Core Intel Xeon, Dual Core, i7 or above- Memory : Minimum 16 GB- Hard Disk : SATA SSD with 4 TB- Oerating System : Linux SUSE- Vendors to provide Duplicate Servers in HOT STANDBY MODEas per tender specification.
32	Supply, Installation, Testing and Commissioning of User Call Control Application for all users/extensions, Voice Messaging Application inclusive of voice mail licences for users and inclusive of computer application and operating system, Emergency response services with voice messaging, inclusive of licences as per technical Specification.
33	Supply, Installation, Testing and Commissioning of IP Phone with display as per tender specification etc. as required.
34	“Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands free dialing system“(a) Single line BPL/SONY/BEETEL or equivalent make”
35	Sec.2.0 Video Survelance/CCTV SystemSupply, Installation, Testing & Commissioning of Vandal reistant True Day Night Veri-Focal Dome Camera 2MP,Full HD, 1/2.8 type CMOS image sensor, 2.8 -12mm motorized focus lens, Aperture Ratio F1.8, Wide Dynamic Range - 120dB, H.265 / H.264 & MJPEG dual-stream encoding,25/30fps@1080P (1920 ×1080),IR LEDs length minimum 20 m, Motion Detection , Tampering ,Defocus detection ,Hallway view ,Micro SD Card - 128GB capacity, IP66 rated, IK 10 and as per technical Specification ,The Camera must be UL Listed. as per technical specification etc. as required.
36	Supply, Installation, Testing & Commissioning of True Day Night BulletCamera 2MP,Full HD, 1/2.8 type CMOS image sensor, Autoiris Varifocal lens 2.8 - 12mm motorized focus lens , Aperture Ratio F1.4, Wide Dynamic Range - 120dB, H.265 / H.264 & MJPEG dual-stream encoding,25/30fps@1080P (1920 ×1080),IR LEDs length minimum 30 m, Motion Detection , Tampering ,Defocus detection ,Hallway View, Micro SD Card - 128GB capacity, IP66 rated, IK 10 as per technical specification The Camera must be UL Listed, as per technical specification etc. as required.
37	Supply, Installation, Testing & Commissioning ofVandal Resistant PTZ Network Cameras,IR with 350 Mtrs Viewing Distance 30 X Optical Zoom,camera with 1/1.9\" sensor, 2MP, Full HD(1080p) @60fps WDR off or @15fps WDR on, H.265/H.264/MJPEG, 120dB WDR, Auto Tracking, true D/N,,Edge Analytics - Auto Tracking, Virtual Perimeter, Entry/Exit Detection, Tampering,SD/SDHC/SDXC memory slot, 24VAC, IP66, IK10 .including all mounting accessories.The Camera must be UL Listed, as per technical specification etc. as required.
38	Supplying, installtion, testing and commissioning of Server(s) required for NSM & NVMMS - Industry standard Intel based platform, rack mounted, redundancy architecture for critical hardware components, licensed Microsoft Server operating system and requisite user licenses, licensed application suites, 2 x Quad Core Intel® Xeon latest processors or better, 8 GB of RAM, 2 x 1.2 TB of SAS HDDs, minimum 2 additional hard disk drive bays for expansion, 1,280 x 1,024Display/ video resolution, 2 X 10/100/1000 ethernet network interface card, Video memory 2GB above, RAID support built-in, DirectX 8.1 above and pre-installed DVD-R/W Drive and Appropriate Licensed Operating Systems as per NSM & NVMMS Requirement. as per technical specification etc. as required.
39	Supplying, installation, testing and commissioning ofNetwork storage required with a capacity to store the content for 165 cameras for 24Hrs x 30 days at 25fps and 1080p (Minimum 110TB from day 1). It should be scalable (should have sufficient expansion bays for HDDs) for at least additional 50 cameras. Vendor shall submit bandwidth and storage calculator for the proposed camera models as per technical specification etc. as required.
40	Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.
41	Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. as per technical specification etc. as required.
42	Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. as per technical specification etc. as required.
43	Supplying, installation, testing & commissioning of fault isolator complete with base as required. as per technical specification etc. as required.
44	Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. as per technical specification etc. as required.
45	Supplying, installation, testing & commissioning of addressable fire control / Monitor module complete as required. as per technical specification etc. as required.
46	Supplying, installation, testing & commissioning of addressable phone control module complete as required. as per technical specification etc. as required.
47	Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required. as per technical specification etc. as required.
48	Supplying, installation, testing & commissioning of addressable manual call point complete as required. as per technical specification etc. as required.
49	Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. as per technical specification etc. as required.
50	Supplying, installation, testing & commissioning of intelligent interface unit BACnet/ Modbus protocol i.e. supplying communication links between building management system and fire alarm control panel complete as required. as per technical specification etc. as required.
51	Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
52	Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
53	Supply, Installation, Testing and Commissioning of 1X500W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection as per technical specification etc. as required.
54	Supply, Installation, Testing and Commissioning of 6W Ceiling Speaker with max SPL1M/1W 96dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tappings at 6W/3W/1.5Was per technical specification etc. as required.
55	Supply, Installation, Testing and Commissioning of Volume Controller, Built-in 24V DC forced relay, Selectable power : 120W,Frequency response of 100Hz- 20 KHz, 100V input voltage with required back box, as per technical specification etc. as required.
56	Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Single pair, 2-core, 1.5 sqmm, For PA System
57	Sec.4.0 Access Control System“Providing & erecting approved make Fingerprint and card based premium Door controller with LCD and Keypad having following features.”(A) Optical Fingerprint and card based Reader (Card personality Modulenot included) “(B) Dot – Matrix LCD and Touch sense Keypad “(C) Built-in interfaces like door lock, door sense exit Reader, Exit switch, Ethernet RS485, Aux Input & aux output port “(D) 5000 Events, access Control, Time Attendance, Tamper Detection “(E) 4 LEDS and Buzzer”
58	“Providing & erecting approved make Card Reader having following features. “[A] Wiegand/ RS232 Interface “(B) Power supply from COSEC Door controller or through Separate Adaptor “(C) Compatible with any COSEC Door controllers “(D) 4 LEDs (Status, Alarm, Allowed and Denied) and Buzzer “(E) Tamper Detection”
59	“Providing & erecting approved make Card Personality Module (CPM) having following features “(A) EM proximity Card Reader Module [Low Frequency] “(B) Compatible with any COSEC Door Controllers and COSEC Reader CA “(C) Supports EM Proximity Card”
60	“Providing & erecting approved make Panel Controller for Multiple Door Controller having following feature “(A) Controls up to 16 Door Contioiiers “(B) Ethernet RS485, USB, Aux Input and Aux output port “(C) 10000 Users Capacity and 100000 Events Storage “(D) 32-bit processor, 32 MB RAM and 32 MB Flash “(E) Compact and Elegant Design”
61	Sec.5.0 Cable TV Distribution SystemProviding following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge.(4)TV Co-axial Socket outlet.Cat. III.
62	Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly – Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. (b) RG – 6.
63	Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly – Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. (e) RG – 11.
64	Sec.6.0IT EquipmentsSITC of Desktop Computer Systems having Core i5 10th Gen Processor with 3.3 GHz Processor or Higher, 8 GB RAM /500GB SSD and 1 TB HDD storage, Factory Loaded Windows 11 Proffessional OS, 1 x HDMI, 1 x RJ45, Bluetooth, Wifi, 19.5’ LED Monitor as per the detailed tender specification.
65	SITC of Laser Jet Printers having A4 Supported paper size, Mono Type printingas per the detailed tender specification.
66	SITC of Duplex Printer having Composite cartrige Inkjet, A4 Printer size, supported, Network connectivity, Wireless connectivity,as per the detailed tender specification.
67	SITC of Direct Thermal Printer havingas per the detailed tender specification.
68	SITC of Barcode Printer as per the detailed tender specification.
69	SITC of USB Based Barcode Scanner Table Top Plug & Play Automatic scanner, as per the detailed tender specification.
70	SITC of Laptop having 12th Generation Intel® Core™ i5-1215U Processor, Windows 11 OS, Integrated Intel® UHD Graphics for 12th Gen Intel® Processors, 16 GB DDR4, 512 GB SSD , 39.62cms (15.6) FHD (1920 x 1080), Anti-Glare, Non-Touch,720P HD, Wi-Fi 6 & Bluetooth® 5.1 or above as per the detailed tender specification.
71	SITC of Projector having DLP Technology, 3200 ANSI lumensor higher brightness, 1920x1200 (WUXGA) or better Resolution,RJ45x1 interface support, as per the detailed tender specification.
72	SITC of 24” Touch Information Kiosk with Inbuilt Windows (inbuilt core i3 2.2Ghz, 6 Mb intel smart cache memory 2.2Ghz clock speed, 8GB LPDDR4 Main memory Interface, 256 SSD Storage, Graphics resolution 1920x1080), Resolution 1,920 x 1,080, Brightness (Typical) 250cd(Typ, w/o glass) cd/㎡, built-in thermal printer with support including credit card, barcode, QR code and NFC Payment Options, Built in speaker (3Wx1).
73	SITC of Video Conferencing Solution with compact bar type having inbuilt camera, codec, microphones, speaker as per detailed tender specifications.
74	SITC LAN Cable CAT6 as per the detail tender specification.
75	SITC of Network Switch having 08 Port PoE+ Network Switch with Fixed 4 x 1G/10G SFP+ Uplink as per detailed tender specification.
76	SITC of Network Switch having 24 Port PoE+ Network Switch with 4 x 10G SFP+ Uplink as per detailed tender specification.
77	Supplying, installation, testing and commissioning of 55 inch anroid professional display with on premisesSignage system 4K (3840 x 2160) UHD Resolution, 440 cd/m2 Brightness ,Contrast Ratio 1200:1, 2 x 10W Watt inbuilt speaker, IP control & RS-232C , Minimum Interface: USB In x 2, HDMI IN x 2, RJ45 x 1, In-built Wi Fi & Bluetooth, supported Landscape, portrait, Support HDMI auto wake-up Features, Support HTML5 platform, Support Multicast/IPTV, On- board Storage 16GB Storage, Support HDCP2.3(for HDMI1/2/3/4), Support USB playback codecs, tilt Mountwith required mounting Bracket as per site requirement, Built in CromeCast / Screen Mirror or wireless Presentation and digital media signage system licesne by same OEM as per tender specification. Complete in all respect including all required for the same. Make :- Samsung, LG, Lloyd or \"Equivalent\"
78	Supply, Installation, Testing & Commissioning of Token Display having 18\" Diagonal display, 3840*2160 Resolution, 230cd/m²Panel brigntness, 1.000.000:1 Contrast Ratio, 178 Degree Viewing Angle, 2x8W inbuilt speaker as per the detailed tender specification.
79	SITC of Laser Jet Printers having A4 Supported paper size, Colour Type printing, Composite cartrige technology,as per the detailed tender specification.
80	SITC of Laserjet Printersupports Scan, FAX, 75,000 pages (per month), upto 1200 dpi, supports wireless, duplex printing.
81	Sec.7.0Audio Visual SolutionSupply, Installation, Testing & Commissioning of Full HD 20X NDI PTZ Camera with HDMI/IP/3G-SDI/USB3.0 & AI Auto Tracking,LAN interface- 10M/100M/1000M adaptive Ethernet port, support POE power supply, support audio and video output with required mouting bracket as per site requirement, as per technical specification etc. Complete In all respect including all required for the same.
82	Supply, Installation, Testing and Commissioning of Presenter Lavalier microphone with belt pack transmitter and single receiver withrechargeable Batteryand rack mount receiver kit, Type: Omni-directional microphone with smallest lavalier / Handheld microphone Tx-Rx set optimized for speeches and lectures. Frequency: The digital wireless system shall operate in the license free frequency. The system shall include the option of changing the operating frequency to avoid RF interference, as per technical specification etc.Complete In all respect including all required for the same.
83	Supply, Installation, Testing and Commissioning of 2-ch Charging Statation forrechargeable Battery supply by same OEM only, as per technical specification etc.Complete In all respect including all required for the same.
84	Supply, Installation, Testing and Commissioning of 1ModulePremium High Speed Gold-plated HDMI 2.0b (18Gbps) flexy (Male to Male) cable, Support Up to 4096x2160@60Hz at RGB 4:4:4 Video Format,HDCP 2.3/ EDID/ CEC/ DDC/ HEC/ ARC/ DisplayID Supported, RoHS compliant as per technical specification etc.Complete In all respect including all required for the same.
85	Supply, Laying of 4 Pair 23 AWG Solid Bare Copper Conductors, FEP Insulation, F/UTP, Helical TC Drain, Ripcord, Flamarrest® Jacket, Plenum CMP-LP (0.6A) as per technical specification etc.Complete In all respect including all required for the same.
86	Supply, Laying of Dual 20 AWG shielded twisted pairs Mic / Control cable as per technical specification etc.Complete In all respect including all required for the same.
87	Supply, Installation, Testing and Commissioning of Network 4K HDMI to NDI Encoder/Decoder Convertable, Should have minimum 1x HDMI IN or SDI IN or DVI IN as per site requirements / 1x HDMI Output or SDI Out or DVI Out as per site requirements, 1x Embedded HDMI Audio Input, 1x Embedded HDMI Audio Output, and 1x 3.5mm Analog Stereo Line Level Output, Should have 1 x Gigabit Ethernet PoE port, as per technical specification etc.Complete In all respect including all required for the same.
88	Supply, Installation, Testing and Commissioning of 24x1G PoE+ 480W 2x1G and 4xSFP+ Managed Switch, as per technical specification etc.Complete In all respect including all required for the same.
89	Supplying, installation, testing and commissioning ofAudio Viusal System for Modular OT Room,, 32 x simultaneous external 4k video inputs supprted, 8 x 3G/HD/SD-SDI connections supporting input in any combination, 48 x IP outputs via Network supported, Support RTMP streaming, Should have 4TB Media Storage (4 x 1 TB SSD in RAID 0) with also support Export video and image files to social media, FTP, local or external volumes, and network servers, with optional transcodingAVi, H.264, MxF, MPEG2, MOV file format. Recodering shuold support the slow-motion playback facility, Software Control support IP video workflow that makes it easier for more people to have control of the live Operation. Providing the ability to configure a custom user interface that delivers exactly the tools and functions you need, easily accessible through any Web browser or operating system. software-driven control system Compatible with modern web browsers to include Google Chrome, Microsoft Edge and Internet Explorer, Mozilla Firefox, and Apple Safari. Its Compatible with workstations, laptops, tablets, and mobile devices running any current OS, to include Windows, Mac, Linux, Android, and iOS. Video system support the network audio input and output via Audio-Over-Ip getway, support the Two way communication & Microsoft Skype TX, Microsoft Teams™, Zoom Meetings™, Slack, Discord™, andintegration using the Live Call Connect feature supportedas per technical specification etc.Complete In all respect including all required for the same.
90	Supplying, installation, testing and commissioning of Network Storage Server with 8-bay supporting capacities ranging from 24TB to multiple petabytes, Rackmount and desktop form factors, with optional storage and networking expansion, Recording of NDI® sources directly to secure shared storage, Support for simultaneous multi-channel capture, ingest, editing, and playback, Instant availability of recorded media for post-production turn around, High bandwidth multi-user media and project sharing, Accelerated link between editorial/graphics and production, Enhanced features like secure project file locking, cloud backup, sync and replication, proxy previews, file automation, and asset tagging, as per technical specification etc. Complete In all respect including all required for the same.
91	Supplying, installation, testing and commissioning of browser-based, software-driven control system with IOS based touch pad, Compatible with modern web browsers to include Google Chrome, Microsoft Edge and Internet Explorer, Mozilla Firefox, and Apple Safari, Compatible with workstations, laptops, tablets, and mobile devices running any current OS, to include Windows, Mac, Linux, Android, and iOS, Includes LivePanel Builder, a customizable control panel creation tool allowing the user to define grid squares as buttons or video windows, as per technical specification etc.Complete In all respect including all required for the same.
92	Supplying, installing, testing and commissioning of The OT Room Audio bundle shall include all the necessary equipment and cabling to provision a large meeting room with conferencing audio capabilities in concert with a UC room system. This equipment shall be one audio digital signal processor, having simultaneous operation of AVB, Dante, and AES67 digital audio networking protocols, 2 mic/line level inputs, 2 mic/line level outputs, Five 1 Gigabit Ethernet port,4 AEC channels assignable to any input. Up to 2x2 channels of configurable USB audio, RS-232 serial port , 4-pin GPIO. Two ceiling mounted loudspeakers which Supports both standard category cables and traditional speaker wiring for audio connections, Speaker Continuous Power Handling @ Nominal Impedance 60W @ 8Ω (240W peak), Two Beamtracking® Ceilling microphone/Tile, Beamtracking technology with four 90-degree zones, providing full 360-degree coverage of the meeting space Using only one channel of AEC per mic. Single cable connection via CAT cable. one room expansion device that shall connect all other devices to an Ethernet network via RJ-45 connectors, Five 1 Gbps RJ-45 ports , Four ports support PoE+ power (IEEE 802.3at Class 4, 30W)and one loudspeaker-mounted PoE+ powered amplifier , Four channels; 3 watts of continuous power per channel, Burst mode to handle peak signals in accordance with ANSI/CTA-2006-B; supports up to 50 watts (4Ω load) or 30 watts (8Ω load) per channel , Includes internal limiter function , Software-selectable power versus channel count Powered by PoE+ (IEEE 802.3at Class 4, 30W),The system shall connect to a UC Codec via a USB interface, as per technical specification etc.Complete In all respect including all required for the same.
93	Supply, Installation, Testing and Commissioning of 1 units of LED Videowall Screen Size 3.6m x 2.m (2% plus minus) (w x h), Pixel Pitch P1.5 mm, Display Technology MicroLED, White Balance Brightness (Nit) ≥800cd, Brightness uniformity should be >95%, Contrast ratio – 3,00,000:1, View Angle H140 and V140 degree, Refresh rate should be ≥3840 Hz, Life of the screen should be more then 100000 hours.Video processer and Controller should have input resolution upto 1920 x 1200 @60 Hz, Maximum Width : 4096 Pixels and Maximum Height : 4096 Pixels. Dual USB2.0 for high speed configuration, 1xHDMI, 1xSDI, 1xDVI, 1xVGA, 1xCVBS, Gray-scale control at low brightness, Need HDCP 1.4 support.MS Structure frame designed fabrication and intsallation along with required brackets, Power Cables, Junction Boxes,Rackfor LED Display and other electrical components as per approval of Structure Engineer Incharge / Consultant with certification
94	Smart Interactive 4K display \| Size : 98\"\"\|EDLA Certified, Google Playstore I Anti Glare + Anti-Fingerprint + Antimicrobial Tempered Glass \| In built Android 13.0 with Android Safe Mode, RAM 8GB, ROM 64GB, Upgradable to 320GB \|CPU (4 Core + 4 Core) \|500 nits Brightness \|40 points Touch \| Embedded Blue Eye Filter \| Anti-Microbial Surface \| Smart Object recognition and responsive multi-touch \|4ms Touch Response time \| Multiple Inputs/Outputs for connectivity\| 40W Speakers \| Slimmer Frame \| Type C Connectivity - 65W \|Customize GUI with Secure User Profiles \| Inbuilt Software for Casting /Broadcasting /Display Remote Management \| 6 User Profile with Password Protection \|Advance whiteboarding Features with Onscreen Annotation \| 3 years warranty \|
95	Supplying, installation, testing and commissioning of Compatible OPS Module for interactive display, 4K Resolution \| Intel I7 - 12th Gen with Intel® Iris® Xe Graphics for 11th Gen Intel® Processors \| 8GB RAM x 1 - DDR4 \| 512 GB SSD Memory\| Pre-install Win 10 Pro English (Trial) as per technical specification attach.
96	Supply, installation, testing and commissioning of 4 HDMI in, 3 HDMI out matrix switcher with inbuilt or extrenal automation platform, Audio line out (de-embedded) -1, GPIO (5V io, buttons)-1, RS-232, ethernet port-3 ( Secure control Ethernet, Utility Ethernet, Configurable Ethernet)
97	Supply, Installation, Testing and Commissioning of video matrix bundle Single CAT 6 connectivity between TX and RX devices, up to 100m, with Power delivery from TX to RX, Video, USB2.0, Ethernet, OCS and Serial USB-C input connectivity on the TX device for 4K Video, Audio, Data, and Power (Video, Audio, Data and Power over a single USB-C connection) USB-C charging up to 100W (120W total) on the TX Multiple USB 2.0 connectivity for any type of USB device (Camera, speakerphone, touch monitor, USB-HID devices etc.) Both on the TX and the RX Independent USB Host switching layer for multiple USB hosts, up to 8 devices (4x at the TX side, 4x at the RX side) Room device control via Ethernet (TCP/IP) or Serial (2x at TX device, 1x at RX device) , as per technical specification etc. as required.
98	Supplying, installation, testing and commissioning of twisted pair HDBaseT™ extenders provide full HDCP and EDID compliance, transmit universal 4K video, audio and Bi-directional RS-232 and IR up to a range of 170 m over a single CATx cable.Extends DVI or HDMI 1.4 + Audio + Ethernet + RS-232 + IR over one CAT5/6/7 cable
99	Supplying, installation, testing and commissioning of HDbaseT Receiver with HDBaseT IN and HDMI OUT, as per technical specification attach.
100	Supplying, installation, testing and commissioning of2x1 switcher with USB-C, HDMI 2.0 and USB 3.1 ports supporting 4K signal formats (4K UHD @ 60Hz RGB 4:4:4, up to 18 Gbps), secure control Ethernet interface. USB-C connectivity for 4K video, audio, control signals and charging up to 100W. Advanced room automation and control features.
101	Supply, installation, testing and commissioning of Wireless Presenter module. Module Should allow simultaneous present upto 4 or more screens at the same time. Module should support both wired and wireless connectivity. Module should have Built-in tools allow users to annotate shared content and the virtual whiteboard, Shared content is rebroadcasted to the participants’ devices, letting them select, view, and annotate content on their own devices. Module should allow a user to manage on-screen presenters as well as queued presenters.Module should allow Wireless screen casting through native AirPlay, 49.Google Cast, or Miracast protocols. Built-in tools allow users to annotate shared content and the virtual whiteboard. Module should support UC functionality. AV ports: 1 x HDMI in 2.0 1 x HDMI out 2.0 2xUSB 3.0 Type-A. Network port: 1 x Gigabit ethernet with PoE 30W. The wireless presentation Module should be CE marked, UL listed, and compliant with the RoHS directive as per tender specification.
102	Supply, Laying of USB cable - 2 Mtr any type of interface (A/B/C) as per site requirements as per technical specification etc. Complete In all respect including all required for the same.
103	Supply, Laying of USB cable - 5 Mtr any type of interface (A/B/C) as per site requirements as per technical specification etc.Complete In all respect including all required for the same.
104	Supply, Installation, Testing and Commissioning of 5 Module Premium High Speed Gold-plated HDMI 2.0b (18Gbps) flexy (Male to Male) cable, Support Up to 4096x2160@60Hz at RGB 4:4:4 Video Format,HDCP 2.3/ EDID/ CEC/ DDC/ HEC/ ARC/ DisplayID Supported, RoHS compliant as per technical specification etc.Complete In all respect including all required for the same.
105	Supply, Installation, Testing and Commissioning of 10M Premium High Speed Gold-plated HDMI 2.0b (18Gbps)cable, Support Up to 4096x2160@60Hz at RGB 4:4:4 Video Format,HDCP 2.2/ EDID/ CEC/ DDC/ HEC/ ARC/ DisplayID Supported, RoHS compliant as per technical specification etc.Complete In all respect including all required for the same.
106	Supply, Installation, Testing and Commissioning of Tabletop 10.9\" in. or higer diagonal, with required tabletop bracket kit, with automation control app and required lic..as per technical specification etc. as required.
107	Supply, Installation, Testing and Commissioning of 25mm PVC Counduit with require all types of require Laying Accessories as per OT site requiremenst technical specification etc. as required.
108	Supply, Installation, Testing and Commissioning of1m Passive SFP+ Direct Attach Cable for AV Network Switch
109	Supply, Installation, Testing and Commissioning of 10G SFP+ Transceiver, 10GBase-LR Lite for single mode 9/125µm fiber for Av Network Switch
110	Supply, Installation, Testing and Commissioning of Av Managemant Client Server platform,Intel Cpu i7-14700K, Gigabyte Motherboard Z790 Aorus Master X, CORSAIR RAM 64GB ( 32GB *2 ) DDR5 VENGENCE 5200 MHZ , SK HYNIX 1 TBnvme m.2 P41 Platinium SSD NVME 7000 SPEED, Gigabyte Smps P750GM 80 Plus Gold,Gigabyte Graphics Card GV-N4060 Eagle OC-8GD, Gigabyte Cabinet Aorus GB-C301G-BLACK W/O SMPS, Cooler Master Liquid Cooling Fan ML240L Core ARGB, KB+MOUSE LOGITECH USB COMBO, LAPN PORT (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps)
111	Sec.6.0 iBMS SystemSupplying, installation, testing and commissioning of Intel Core i7 Processor and with 3GHz minimumclock speed, minimum of 16 GB RAM , 512 KB cache, Minimum of 500 GB SSD and 1TB HDD storage, optical Mouse, 104 keys key board, with 10/100 Mbps Ethernet card (Min. of 2 slots) . The system shall be provided with 32\" TFT monitor for viewing GUI application.as per technical specification etc. as required.
112	Supplying, installation, testing and commissioning of Laser Jet B/W Printer - A4 Size. as per technical specification etc. as required.
113	SITC of the following window based graphical software for IBMS system with 2 Nos Client for Operator workstation. hard/soft I/Os to be considered with reference to IO Summary and shall have provision of future expansion. The following software packages shall have below minimum features and compliances. a) 3D & HD vector dynamic graphics with Autocad import of plan with Zoom In & Zoom Out facilityb)Native 64 Bit System , BTL,UL,EN Certified System, BACnet Profile B-AWS (Advanced workstation) as per the BTL Listingc) Multi-Monitor Support-( Min 4 Nos), Multi-language support,Object tracking on multiple camerasd) Support Certified OPC DA Server by OPC Foundatione) HTML5 based Web-Server software shall permit use of Standard Web-Browsers such as Microsoft Edge, Google Chrome, Mozilla Firefox, etcf) The Software shall comply to international standards and strive to deliver products that meet security standards such as ISA/IEC 62443, UL2900, ISO/IEC 27001, ISO/IEC62443 and OWASPg) Cybersecurity SL2, Seamless integration of Security certificates within customer IT infrastructure, Microsoft’s active directory-based authentication, LDAP integration, Use of network infrastructure that supports physicalnetwork or VLAN segmentation, End-to-end encryption from client to server,End-to-end encryption between servers, Certificate-based data exchange, Encrypted backupsh) Audit Trail , 4-Eye Principle, Data Point Validation, Verified tempering evidence for report transmissionI) Reports - Customized reports for Trends and alarm with Graphic screen shots. J) Seamless integration of Fire alarm system should be there.K) Alarm Escalation: Assisted treatment of alarms which helps in Predefined & fast intervention steps for faster response
114	Supply, Installation, Configuration, Programming of Web Based Energy Management & Reporting Tool software for Monitoring Building efficiency & Customization of Energy Management.Energy dashboards having cockpit view of total energy utilized. Energy and Power reports.as per Functional Specifications of the Bid for 100 Meters. Bidders Must Consider all Application Modules and Licenses to be Part of the Bid. as required.
115	Supply, Installation, testing, commissioningof True IP Based BTL & UL Listed for third party integration. The controller shall have 2-port Ethernet switch and WLAN interface.It should have BTL label (BACnet communications passed the BTL test) and consisting of Dual microprocessor with Storage capacity of 1 GByte RAM. It should support Real Time clock with backup of upto 7 Days using super capacitor and also should have option for external battery if required. It should Support of the major communication protocols: BACnet,/IP, BACnet MS/TP, Modbus IP and Modbus RTU. for Chiller Units Soft Data Integration on Modbus Rs-485 / Bacnet Over IP.
116	for Secondry Pump Soft Data Integration on Modbus Rs-485/ Bacnet Over IP.
117	For AHU VFDs Soft Data Integrationon Modbus Rs-485/ Bacnet Over IP.
118	For VRV INTEGRATION(ODU & IDU with Cassette Unite Soft Data Integration on Modbus Rs-485/ Bacnet Over IP.
119	for Energy Meter\"s Soft Data Integration on Modbus Rs-485/ Bacnet Over IP.
120	for UPS\"sSoft Data Integration on Modbus Rs-485/ Bacnet Over IP.
121	for Breaker\"sSoft Data Integration on Modbus Rs-485/ Bacnet Over IP.
122	for Fire Alarm System Soft Data Integration on Modbus Rs-485/ Bacnet Over IP.
123	for DGsSoft Data Integration on Modbus Rs-485/ Bacnet Over IP.
124	for ETPs orSTPSSoft Data Integration on Modbus Rs-485/ Bacnet Over IP.
125	Supply, Developing,Testing,Commissioningof True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch.The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-time clock with backup for min 7 days using super capacitor. All DDC controllers shall accept 24 AC/DC Power supply But All DDC Control panels shall accept 230V, 50Hz Uninterrupted UPS power supply, provided by end user directly. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Cloud connectivity for remote access and inbuilt port for POT for local interface. Note: Comissioning tool should not be dependent on any license / dongle and no extra cost should be charged. The above shall be housed in vandal proof, lockable & secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Each DDC panel have spare capacity of 10% for future expansion.DDC Panel for Chiller Plant Room - Point Should be considered as per IO Summary as required.
126	Supply, Developing,Testing,Commissioningof True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch.The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-time clock with backup for min 7 days using super capacitor. All DDC controllers shall accept 24 AC/DC Power supply But All DDC Control panels shall accept 230V, 50Hz Uninterrupted UPS power supply, provided by end user directly. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Cloud connectivity for remote access and inbuilt port for POT for local interface. Note: Comissioning tool should not be dependent on any license / dongle and no extra cost should be charged. The above shall be housed in vandal proof, lockable & secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Each DDC panel have spare capacity of 10% for future expansion.DDC Panel for Air Handling Unit - Point Should be considered as per IO Summary as required.(Min 2 Nos AHU Consider in SingleDDC)
127	Supply, Developing,Testing,Commissioningof True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch.The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-time clock with backup for min 7 days using super capacitor. All DDC controllers shall accept 24 AC/DC Power supply But All DDC Control panels shall accept 230V, 50Hz Uninterrupted UPS power supply, provided by end user directly. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Cloud connectivity for remote access and inbuilt port for POT for local interface. Note: Comissioning tool should not be dependent on any license / dongle and no extra cost should be charged. The above shall be housed in vandal proof, lockable & secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Each DDC panel have spare capacity of 10% for future expansion. DDC Panel for CSU - Point Should be considered as per IO Summary as required.(Min 2 NosCSU Consider in SingleDDC)
128	DDC Panel for Ventillation(Fresh Air) Fans - Smoke Exhuast Fan, - Point Should be considered as per IO Summary as required.(Max 20 Nos Fans Consider in SingleDDC)
129	DDC Panel for Electrical System -Point Should be considered as per IO Summary as required.
130	DDC Panel for Plumbing System - Point Should be considered as per IO Summary as required.
131	DDC Panel for Water Tanks - Point Should be considered as per IO Summary as required.
132	DDC Panel for Fire Fighting Ststem - Point Should be considered as per IO Summary as required.
133	FIre Fighting M.S. Above Ground PipeSupply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required:150 mm dia.
134	M.S. Above Ground PipeSupply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required:100 mm dia.
135	M.S. Above Ground PipeSupply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required:80 mm dia
136	M.S. Above Ground PipeSupply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required:65mm dia
137	M.S. Above Ground PipeSupply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required:50 mm dia
138	M.S. Above Ground PipeSupply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required:40mm dia
139	M.S. Above Ground PipeSupply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / gaskets / Nut bolts etc., and laying on the surface including painting with one coat of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required:25 mm dia
140	Supply, installation, testing and commissioning of Y Strainer of CI Body flanged ends with stainless steel strainer 304 having 1.2mm perforation complete with necessary accessories: 150 mm dia.
141	Supply, installation, testing and commissioning of Butterfly valve (manual) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified: 150 mm dia.
142	Supply, installation, testing and commissioning of Butterfly valve (manual) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified: 100 mm dia.
143	Supply, installation, testing and commissioning of Butterfly valve (manual) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified: 80 mm dia.
144	Supply, installation, testing and commissioning of C.I.Gate valve (PN 1.6) as per IS:14846 complete as required: 150 mm dia.
145	Supply, installation, testing and commissioning of Non Return Valvewith dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified: 150 mm dia.
146	Supply, installation, testing and commissioning of Non Return Valve with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified 100 mm dia.
147	Supply, Installation, Testing and Commissioningof 150mm dia Pressure Gauge of range 0 - 15 Kg / cm² conforming to IS- 3624 having bourdon tube of stainless steel 316 in cast aluminium, stove enameled, black, weather proof case with outer,screwed aluminium bezel and complete with necessary U-type stainless steel siphon tube and cock including providing suitably painted angle iron support to the tube etc.as per specification complete as required.
148	Supply, installation, testing and commissioning of GM Single headed oblique type Hydrant valve (Internal & External) with instantaneous gun metal cuplings of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank pvc cap and chain as required.
149	Supply, Installation, Testing and Commissioning of Fire Hose Cabinet of size 750mmx600mx250mm fabricated from 18 swg thick MS sheet with 6mm thick glazed hinged type centre opening doors having locking arrangement suitable for accommodating 2 nos RRL hose pipes, 1 no. nozzle, branch pipe & painting with two coats of anti-corrosive primer and two coats of approved red enamel paint etc. complete as required.
150	Supply, installation, testing and commissioning 63 mm dia, 2x15 Mtrs. long RRL Hose Pipe with 63 mm dia male & female gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A - RRL) as required.
151	Supply, Installation, Testing and commissioning of63 mm GM Branch Pipe with 20mm GM nozzle conforming to IS:903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
152	Supply, installation, testing and commissioning of First- Aid Hose Reel equipment with M.S. construction spray painted in post office red, conforming to IS:884 with up to date amendments, complete with the following as required. (a) 36 m. long, 25 mm dia. water hose thermoplastic (Textile reinforced) Type-2 as per IS:12585.(b) 25 mm dia gun metal globe valve & nozzle(c) Drum and swinging type fixing brackets on the wall.(d) Connections from riser with 25 mm dia. Gun metal ball valve.
153	Providing and fixing standard fireman Axe with heavy dutyinsulated rubber handle as per IS: 926 with clamps.
154	Supply, installation, testing and commissioning UL listed Quartzoid Bulb type Sprinkler Heads. (Standard Response): Pendent sprinkler with rosette plate 68°C
155	Supply, installation, testing and commissioning UL listed Quartzoid Bulb type Sprinkler Heads. (Standard Response): Upright Sprinkler 68°C standard response
156	Providing, fixing, testing & commissioning UL listed SS corrugated braided Flexible pipe, nominal Inlet by outlet 1\"x ½\"with required accessories to complete the installation:Size: 1200mm
157	Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. For 4.5 Kg Capacity
158	Supply, installation, testing and commissioning of ABC type 6 kg Fire Extinguisher confirm to IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets.
159	Providing,fixingincludingtestingandcommissioningof Drain valve & assembly with 2 nos. of 1\" ball valve, sight glass, internal 1\" pipe & required fittings. 25mm dia
160	Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size: 25 mm (For Riser)
161	Supply, installation, testing and commissioning UL listed Quartzoid Bulb type Sprinkler Heads. (Standard Response): Pendent sprinkler with rosette plate 68°C
162	Supply, installation, testing and commissioning UL listed Quartzoid Bulb type Sprinkler Heads. (Standard Response): Upright Sprinkler 68°C standard response
163	Side Wall Sprinkler
164	Providing, fixing, testing & commissioning UL listed SS corrugatedbraided Flexible pipe, nominal Inlet by outlet 1\"x ½\"with required accessories to complete the installation: Size: 1000mm
165	Supply,Installation,Testing andcommissioning of Flow Switch with fittings, Flanges, nut-bolts, washers etc. as per requirement.
166	Providing, fixing AUTO GLOW photo luminescent Signage\"s as per IS standard in Block / Small Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes: Fire Equipment: 4\" x 12\"
167	Providing, fixing AUTO GLOW photo luminescent Signage\"s as per IS standard in Block / Small Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes: In case of Fire, do not use lift, use staircase: 8\" x 8\"
168	Providing, fixing AUTO GLOW photo luminescent Signage\"s as per IS standard in Block / Small Letters on rigid sheet with necessarywall or Ceiling fittings as Specified Sizes: Fire Lift: 4\" x 12\"
169	Operation of ELV Solution consists of Passive Networking, Active Networking, Fire Alarm, Public Address, Video Surveillance, Building Management System, Audio Visual, Nurse Call, IT Peripherals, etc installed at 300 Bed Marwad Hospital, Daman. Operation will be 24x7.- During DLP Period (1st Year)
170	Operation and Comprehensive Maintenance of ELV Solution consists of Passive Networking, Active Networking, Fire Alarm, Public Address, Video Surveillance, Building Management System, Audio Visual, Nurse Call, IT Peripherals, etc installed at 300 Bed Marwad Hospital, Daman. Operation will be 24x7.- After DLP Period (2nd Year)
171	Operation and Comprehensive Maintenance of ELV Solution consists of Passive Networking, Active Networking, Fire Alarm, Public Address, Video Surveillance, Building Management System, Audio Visual, Nurse Call, IT Peripherals, etc installed at 300 Bed Marwad Hospital, Daman. Operation will be 24x7.- After DLP Period (3rd Year)
172	Operation and Comprehensive Maintenance of ELV Solution consists of Passive Networking, Active Networking, Fire Alarm, Public Address, Video Surveillance, Building Management System, Audio Visual, Nurse Call, IT Peripherals, etc installed at 300 Bed Marwad Hospital, Daman. Operation will be 24x7.- After DLP Period (4th Year)
173	Operation and Comprehensive Maintenance of ELV Solution consists of Passive Networking, Active Networking, Fire Alarm, Public Address, Video Surveillance, Building Management System, Audio Visual, Nurse Call, IT Peripherals, etc installed at 300 Bed Marwad Hospital, Daman. Operation will be 24x7.- After DLP Period (5th Year)
174	Operation and Comprehensive Maintenance of ELV Solution consists of Passive Networking, Active Networking, Fire Alarm, Public Address, Video Surveillance, Building Management System, Audio Visual, Nurse Call, IT Peripherals, etc installed at 300 Bed Marwad Hospital, Daman. Operation will be 24x7.- After DLP Period (6th Year)
175	08.00 ELEVATORELEVATORFOR BUILDING - G + 2 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:15/16 passengers . G + 2floor withRated Speedof 1.5 m/sec-1.75 m/sec withmicro proce/PLC control and ACVVVF. drive, Duplex Control, Machine Room Less (MRL) - PREMIUM CATEGEROY Make : OTIS, Mitshubishi, Schindler, Johnson & KONE [1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift duty 3 phase 440 V A. C. Permanent magnetic synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVF, vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/Down Contactor with overload and phase reversal relay and safety controls.[3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC/Granite with choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. S.S. Hand rail at 900 mm height for all three side. Door must be clear 900 mm centre openable. [4] All landing doors shall be fully automatic centre opening/ telescopic opening made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside.[5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided.[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside the car and at all floors.[7] Full height infra red curtain with multiple criss / crossing light beams shall be provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity.[9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till excess load is removed.[10] Spring buffers/PU Buffers shall be provided.[11] Car fan with automatic sleep timer shall be provided.[12] Voice annunciater with suitable music shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control panel.[14] Mechanical over speed governor, door key holes in the floor doors, fireman switch shall be provided.[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the Contractor, along with the other steel structure works, foundations for the machine etc…[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring in lift machine room and lift well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Power supply of 3 phase 440 V shall be made available by department in lift machine room.[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of lift shall be made by contractor with extra cost. [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission from lift inspector and other authorities.[20] As per statutory requirement of Got. Of Gujarat lift & escalator act 2000, contractor has to provide 1. Car top safety barricade2. Push & talk communication system.3. Fireman\"s switch operation at Ground Floor
176	08.00 ELEVATOR ELEVATORFOR BUILDING - G + 2 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:27 passengers . G + 2floor withRated Speedof 1.5 m/sec-1.75 m/sec withmicro proce/PLC control and ACVVVF. drive, Duplex Control, Machine Room Less (MRL) - PREMIUM CATEGEROY Make : OTIS, Mitshubishi, Johnson, KONE & Schindler Only (Joint Venture will not be allowed) [1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift duty 3 phase 440 V A. C. Permanent magnetic synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVF, vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/Down Contactor with overload and phase reversal relay and safety controls.[3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC/Granite with choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. S.S. Hand rail at 900 mm height for all three side. Door must be clear 1200 mm centre openable. [4] All landing doors shall be fully automatic centre opening/ telescopic opening made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside.[5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided.[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside the car and at all floors.[7] Full height infra red curtain with multiple criss / crossing light beams shall be provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity.[9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till excess load is removed.[10] Spring buffers/PU Buffers shall be provided.[11] Car fan with automatic sleep timer shall be provided.[12] Voice annunciater with suitable music shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control panel.[14] Mechanical over speed governor, door key holes in the floor doors, fireman switch shall be provided.[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the Contractor, along with the other steel structure works, foundations for the machine etc…[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring in lift machine room and lift well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Power supply of 3 phase 440 V shall be made available by department in lift machine room.[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of lift shall be made by contractor with extra cost. [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission from lift inspector and other authorities.[20] As per statutory requirement of Got. Of Gujarat lift & escalator act 2000, contractor has to provide 1. Car top safety barricade2. Push & talk communication system.3. Fireman\"s switch operation at Ground Floor
177	Providing and applying water repellant paint two coat coating on external texture plaster walls for any height with necessary scaffolding finishing surface etc. Including cleaning the surface, removing loose material etc. Complete as directed by Engineer In-charge. Complete in all respect including all required for the same. Complete in all respect including all required for the same.
178	Fully Glazed Aluminum Section\"s partition : 101.6 x 44.45 x 3.18 single -Double partition, Glazing, 12mm plain Tough Glass with Powder coating with protective Film with Dorma auto sensor door system E S Pro Systems.( A ) ES 250 PRO EASY 6.150m-2L, Without Lock wall mounting backplate and Endplate-Silver Anodised Finish ( FL ) 1N, Glass clamping Rail-1550 mm, Nemo Motion+ Nemo Dual ( Safety & Motion ) Combo Pack five position programe switch with Knob cable for Program switch.
179	Sliding Folding Type Lovers door in Frame : 47.62 x 44.45 door top ( 19503 ), Glazing plet, Outer Frame45 x 50mm ( 21292 ), Glazing clip(19390), 75mm x 12mm plain pipe ( 14153 ), 75 x 12mm Aluminum bar ( 10084 )
180	Louver partition with door for passage area : 47.62 x 44.45 mm door top ( 19503 ), Glazing plet, Glazing clip ( 19390 ), 75mm x 12mm Plain pipe ( 14153 ), 75mm x 12mm aluminum bar (10084 ).
181	Providing material and labour for fixing sun screen partition( Sun screen Guard ) for passage area as per issued drawing by architect and also sample to be approved by engineer in charge before mass execution.
182	Providing material and labour for laying approved quality average 18mm thick mirror polished kota + Marble stone flooring of approved shade in floor in any pattern etc sizes upto 600mm including average 20 mm thick cement mortar bedding in 1:6 laid and jointed with white cement and matching pigment including rubbing, re-polishing after fixing to remove any undulation between the joints (if required) with different grades of Emery, refilling of open joints, curing, daily cleaning and mopping, as per satisfaction of Architect and as directed by Engineer in charge at all floors/ all levels/ all heights and all shapes. Sample and mockup shall be approvd procurement of material.
183	Furniture SITC OF Below Mention Items.CABIN TABLES SIZE:1800 X 750 X 750 Composit storage:1200 x 450 x 750SpecificationsTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edgesSupport: End Legs: MS powder coated PERFORM legs.Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm HtWire Management: Flip up with cable dumpSpecifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
184	CABIN TABLESSIZE:1800 X 900 X 750 Composit storage:1200 x 450 x 750SpecificationsTable Top: 25mm thick Pre laminate particle board with2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legs.Modesty Panel: 18mm thk pre lam board with 2mm PVCedge lipping of 450mm HtWire Management: Flip up with cable dumpSpecifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
185	INTEGRATE CABIN TABLESIZE:2100 X 900 X 750 Composit storage:900 x 450 x 750SpecificationsTable Top: 25mm thick Pre laminate particle boardwith 2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated integrate legsModesty Panel: 18mm thk pre lam board with 2mmPVC edge lipping of 450mm Ht.Wire Management: 450mm Aluminium Flip Up andprovision to mount swicthes and sockets on PVC cabledump and Vertical wire entry cover or vertebra for wireuptake from floor to cable dump dumpSpecifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
186	CABIN TABLESSIZE:2100 X 750 X 750 Composit storage:1200 x 450 x 750SpecificationsTable Top: 25mm thick Pre laminate particle board with2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legs.Modesty Panel: 18mm thk pre lam board with 2mm PVCedge lipping of 450mm HtWire Management: Flip up with cable dumpSpecifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
187	CABIN TABLESSIZE:1350 X 750 X 750 Composit storage:900 x 450 x 750SpecificationsTable Top: 25mm thick Pre laminate particle board with2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legs.Modesty Panel: 18mm thk pre lam board with 2mm PVCedge lipping of 450mm HtWire Management: Flip up with cable dumpSpecifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
188	CABIN TABLESSIZE:1500 X 750 X 750 Composit storage:900 x 450 x 750SpecificationsTable Top: 25mm thick Pre laminate particle board with2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legs.Modesty Panel: 18mm thk pre lam board with 2mm PVCedge lipping of 450mm HtWire Management: Flip up with cable dumpSpecifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
189	CABIN TABLESSIZE:1500 X 600 X 750 Composit storage:1200 x 450 x 750SpecificationsTable Top: 25mm thick Pre laminate particle board with2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legs.Modesty Panel: 18mm thk pre lam board with 2mm PVCedge lipping of 450mm HtWire Management: Flip up with cable dumpSpecifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
190	CIRCULAR CENTERE TABLESIZE:600D x 450Hpowder coated legs
191	SIZE:1800 X 900 X 750SpecificationsTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legsIntermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm)Wire Management:450mm Aluminium flipup with soft closure and provision to mount switches and sockets on Cable tray & Intermediate leg with wire entry /vertical wire entry cover considered.
192	SIZE:2100 X 1050 X 750SpecificationsTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legsIntermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm)Wire Management:450mm Aluminium flipup with soft closure and provision to mount switches and sockets on Cable tray & Intermediate leg with wire entry /vertical wire entry cover considered.
193	STORAGESIZE:1050 X 450 X 1800Specifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
194	STORAGESIZE:900 X 450 X 1800Specifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
195	CABIN TABLESSIZE: 1500 X 600 X 750PEDESTAL SIZE:400 X 450 X 6002 Drawer + 1 FillingSpecificationsTable Top: 25mm thick Pre laminate particle boardwith 2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated legsModesty Panel: 18mm thk pre lam board with2mm PVC edge lipping of 450mm HtWire Management: Flip up with cable dump
196	STORAGESIZE:1500(750*2) X 450 X 1200Specifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
197	LINEAR WORKSTATION 1 seater - NSSIZE:3000 (1500*2) X 600 X 750PEDESTALSIZE:400 X 450 X 6002 Drawer + 1 FillingSpecificationsTable Top: 25mm thick Pre laminate particle board with 2mmPVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legsIntermediate Legs: MS podwer coated 60X40mm legs andsupporting MS cross beams (40X20mm)Wire Management250mm Ht Racway with 65mm Dia Wire Manager GrommetSpecificationsVertical Raceway with built in separator for power and data of size 250H X 70mm thick with provision to mountswicthes and sockets on laminate facia with Vertical Wire Entry cover for wire uptake from floor to raceway with 65mmDia Wire Manager Grommet.Specifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
198	LINEAR WORKSTATION 4 seater - SharingSIZE:1200 X 600 X 750PEDESTALSIZE:400 X 450 X 6002 Drawer + 1 FillingPRIVACY SCREENSSize:1050l x 300h8MM COLORED GLASS SCREENSpecificationsTable Top: 25mm thick Pre laminate particle board with 2mmPVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legsIntermediate Legs: MS podwer coated 60X40mm legs andsupporting MS cross beams (40X20mm)Wire Management250mm Ht Racway with 65mm Dia Wire Manager GrommetSpecificationsVertical Raceway with built in separator for power and data of size 250H X 70mm thick with provision to mountswicthes and sockets on laminate facia with Vertical Wire Entry cover for wire uptake from floor to raceway with 65mmDia Wire Manager Grommet.HANGING MODESTY PANEL MAIN 12mm prelamSpecifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
199	PERFORM TABLESIZE:1200L X 1200D X 750HSpecificationsTable Top: 25mm thick Pre laminate particle board with 2mmPVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated PERFORM legsIntermediate Legs: MS podwer coated 60X40mm legs andsupporting MS cross beams (40X20mm)
200	STORAGESIZE:4650 (12003-10501) X 450 X 750Specifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
201	OPD CABIN SIZE: 1800 x W 750 x H 750 LHS & RHSTYPE1 with 900mm width prelam composite storage with cam lock: 25mm thickness PLB pennisular top with 2mm PVC edge binding: Storage 2D+1F and storage: Flip up 360L with vertebrae: 18mm thickness PLT modesty panel: Perform metal leg: Powder coating finish: Round leg 75mm diameter 1.6 mm thicknesswith base 500mm diameter powder coating finish
202	COLLABORATE TABLE WITH SIDE HT ADJ EXTENSIONMAIN TABLE Size:W 1800 x D 900 x H 750mmSide table: W 1050 x D 450 x H 750mmSpecificationsTable Top: 25mm thick Pre laminate particle board with2mm PVC edge lipping on all exposed edgesSupport:End Legs: MS powder coated collaborate loop legs.Modesty Panel: Main & side :1.2 mm thk CRCA metal modestyWire Management: Flip up with cable dumpSide Storage withpneumatic heiightadjustable table
203	STORAGESIZE:1200L X 450 X 750Specifications:Top & Sides : 18mm Thk pre laminated particle boardBack : 9mm Thk pre laminated particle boardShutters : 18mm Thk pre laminated particle boardEdge : All exposed area with 2mm thick PVC edge lippingHandle : Finger groove handleLock : Regular lock
204	SIDE STORAGESIZE:450L X 450D X510HBED SIDE STORAGE Configuration - 1 Draweron Top + Open shelf belowBody - made up of 18MM Thk Prelaminated Particle Board with 2 MM PVC Edge banding Drawer - With full panel drawer slides and Finger groove handle with cam Lock Finish - As per Approved Shade
205	Sofa Cum Bed (with extension on side) - SIZE:1200L/1940L x 815D x 810HT
206	4 DOOR LOCKERS - W 380 x D 450 x H 1850
207	BETQA DUOSIZE:2060L X 900D X2015HBunk Bed WITH STORAGE Overall size of the Cot – 2060L x 900D x 2015mm H The design is a modular & minimalist design, quick & easy to assemble, weldless technology, stable & sturdy.Vertical Tubes are from Sq.40x40mm thk tubes and horizontal beams are Rectangular tubular profiles of 60x40confirming to IS 4923:2017. All 04 vertical sections/legs are connected to to form the under-structure, confirming to IS 4923:2017 grade.Beam to beam are connected by cross beams of Sq.20mm ERW tube confirming to IS 4923:2017, which supports the mattress platform. Mattress platform is of 12mm thk plywood sheet. Product comes with bed side support for safety at second level. The ladder is providedon one of the sides of the bunk bed. The bed side support & ladder are from MS ERW tubes. Enough space is given between the two levels of beds that enables the to sit & work or study comfortabely. The metal storages are offered below the bed, which is connected to the cross beams. Size ofeach storage unit is 750L x 450D.All metal parts comes with powder coating finish 60-80 microns thk.The legs are fitted with PPGF moulded leg bushes & levellers to adjust heights upto 20mm based on ground undulations.
208	BETASIZE:2060L X 900D X400- 750HCot with Metal Storage.Overall size of the Cot – 2060L x 900D x 750mm H (Bed height w/o mattress comes to about400mm)The cot design is simple, modular & minimalist design, quick & easy to assemble, weldless technology, stable & sturdy to take adequate weight.Verticals are from Sq.40x40x1.60mm thk (16g)and horizontal beams are Rectangular tubular profiles of 60x40confirming to IS 4923:2017. All 04 vertical sections/legs are connected to to form the under-structure, confirming to IS 4923:2017 grade.Beam to beam are connected by cross beams of Sq.20mm ERW tube confirming to IS 4923:2017, which supports the mattress platform. Mattress platform is of 12mm thk plywood sheet. The metal storage is offered below the bed, which is connected to the cross beams. Size of same is 750L x 450D.All metal parts comes with powder coating finish 60-80 microns thk.The legs are fitted with PPGF moulded leg bushes & levellers to adjust heights upto 20mm based on ground undulations.
209	238-MS-PEARL SOFA 3 seaterSize:1855 x 720 x 685Leatherette/ Fabric Seater with SS Legs & Frame
210	238-MS-PEARL SOFA 2 seaterSize:1320 x 720 x 685Leatherette/ Fabric Seater with SS Legs & Frame
211	238-MS-PEARL SOFA 1 seaterSize: 810 x 720 x 685Leatherette/ Fabric Seater with SS Legs & Frame
212	VERVA Glass Table610-FS-DM (SIDE TABLE)SIZE:600 X 600
213	VERVA Glass Table610-FL-DM (CENTER TABLE)SIZE:1200 X 600
214	AMAZE GreyMB ML ADJ ARMS* Amaze Grey Medium Back Chair * AN 75 Mesh* Self Calibrating Multilock Mechanism* Adjustable Lumbar Support in grey* Grey One Way Adjustable Arms (Height) and arms (pad)* MetalBase* Fabric Upholstered Cushion Seat
215	PU Tandem 3 Seater
216	PU Tandem 2 Seater
217	AMAZE GreyHB ML ADJ ARMS - WITH HEADREST* Amaze Grey High Back Chair * AN 75 Mesh* With Headrest* Self Calibrating Multilock Mechanism* Adjustable Lumbar Support ingrey* Grey One Way Adjustable Arms (Height)and arms (pad)* MetalBase* Fabric Upholstered Cushion Seat
218	OLIVIANEW CHAIRProduct code : SF-38-01FIXED BASE
219	FP OPTIMA HBSSN \"3D\" ADJ ARMSFP Optima High Back Mesh Chair Optima Mesh Standard (black)* With Headrest* Multilock With Seat Sliding Mechanism* Three Way – Height Adjustable Armrests (Height) with 2D pad (Left/Right & Front/Back)* Metal PC Base* Fabric Upholstered Cushion Seat
220	FP OPTIMA MBSSN \"3D\"ADJ ARMSFP Optima Medium Back Mesh Chair Optima Mesh Standard (black)* Multilock With Seat Sliding Mechanism* Three Way – Height Adjustable Armrests (Height) with 2D pad (Left/Right & Front/Back)* Metal PC Base* Fabric Upholstered Cushion Seat
221	PROVIDING AND FIXING OF 600 TO 750 MM DEPTH RECEPTION COUNTER/NURSHING COUNTER/PHARMACY COUNTER AND D WELCOME COUNTER: MADE IN 19/12/6 MM BWP PLY STRUCTURE WITH INNER SIDE 0.9mm LAMINATE FINISH + OUT SIDE VENEER/LAMINATED FINISH(INSIDE DRAWER AND LOCK SYSTEM AS PER REQUIRED (CORIAN AND GLASS CLADING EXTRA COST)
222	PROVIDING AND FIXING OF STORAGE 300 TO 650 MM DEPTH STORAGE MADE IN 19/12/6 MM BWP PLY STRUCTURE WITH INNER SIDE LAMINATE FINISH + VENEER/ LAMINATED FINISH (INSIDE DRAWER AND LOCK SYSTEM AS PER REQUIRED SHELF)
223	PROVIDING AND FIXING OF WALL PANELLING AND CLADDING WITH ALUMINIUM OR WOODEN FRAMING WITH AS PER REQUIRED SUPPORT WITH 12/19 MM PLY WITH PROPER LINE LEVEL WITH VENEEROR CNC DESIGN OR CUTTING (BACK PAINT GLASS OR GRAPHICS EXTRA)
224	PROVIDING AND FIXING OF TV LEDGE WITH 12/19 MM PLY AND LAMINATE FINISH.
225	PROVIDING AND FIXING OF 12MM TOUGHENED GLASS PARTITION WITH ALL HARDWARE AND FITTING AS PER THE SALETION WITH ONE NO. DOOR WITH HARDWARE WITH CUT OUT OF VISION PANEL AND CASH TRAY AND CUT OUT ALSO
226	PROVIDING AND INSTALLING 6MM CORIAN ON COUNTER AND WALL ON PLYWOOD EXISTING PANELLING, PLY SURFACEAND WALL PANELLING AND ON PARTITION AS PER DESIGN MOULDING AND CNC WORK AS PER INSTRUCTION AND DWG.
227	PROVIDING AND INSTALLING 4MM BPG GLASS ON EXISTING PARTITION OR COUNTER OR PLY SURFACE AND WALL PANELLING AND ON PARTITION SURFACE AS PER DESIGN MOULDING DIAMOND CNC POLISH AND CNC WORK AS PER INSTRUCTION AND DWG .
228	PROVIDING AND FIXING WALL ART IN MDF OR VENEER HAVINGCNC/LASER CUT AND PU POLISH AS PER DWG.
229	PROVIDING AND INSTALLING GRAFIC DESIGNERGRFIC GLASS4MM BPG GLASS ON EXISTING PARTITION OR ONPLYWOOD HEADBORD PANELING ALL COUNTER OR PLY SURFACE ANYLOCATIONAND WALL PANELLING AND ON PARTITION SURFACEAS PERDESIGN MOULDING DIAMOND CNC POLISH AND CNCWORK ASPER INSTRUCTION AND DWG . SINT GOBIN LEKECERBPG GLASS
230	PROVIDING AND FIXING LAMINATED RAFTER FOR DESIGN SIZE 3\"X2\" WITH PVC EDGEBAND AND ALLUMINIUM FRAME AS PERDWG.
231	CANTEEN TABLE WITH CHAIRS
232	PROVIDING & FIXING CHAIRS AND TABLES WITH SS LEGS AND 18MM STONE TOP (8 SEATER TABLE )Conference Table
233	Chair\"s
234	Supply & Installation of PVC White Roller Blinds with Heavy aluminium channel and required accessories. Complete 1 in all respect including all required for the same. ( Mock up will be approved by Engineer-Incharge First )
235	Signages :-Providing and fixing at location a signs M.S internal hollow tube structure using Cosign make (or equivalent or as instructed by Architect/EIC)- Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with 10 year warranty under normal working conditions. Sign is including all extruded aluminium profiles profiles including i) 4 base profiles mill finished glossy appearance or texture, base profile with slots to accomodate 50x 50 mm , 100x50 mm or 150x 50 mm,(to create max depth of 200 mm from either of the combination aftet mounting base & cover profiles, M.S structure & \"V\" notch groove to guide self tapering screws,directly to be screwed with ,Internal M.S structure with help of stainless steel high tensile strength zinc coated self tapering CSK screws (length as per requirement) ii) 4 cover profiles of eliiptical shape premium anodised with intel- locating faciltiy with base profile for posiotioning. to be screwed with base profile (screws not visible from outside) after cover profile is mounted to base iii) Top & bottom ACP egde profile premium grade anodised to cover edges of ACP free mounting without drilling or screwing. iv) ACP connect profile with minimum display free mounting without lockuing & drilling. etc ,Ultra violet print on ACP or ACRYLIC sheet can be done. Also, arrangement is done to (ACP or Acrylic 3 mm thick can be Inserted in Cosign totem profile slots). Top hat asper profile shape (aluminium 2-3 mm thick) is used to cover top part, 2mm thick opaque white acrylic(or clear)can be pasted on text panels as numbers with help of 3M make adhesive.also LED (Back lite) modules or edge lite modules. CosignTotem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Dipslay board Size 3300 MM H x 1200MM W x 150MM T. Complete in all respect including all required for the same.
236	Pylon signage - 2400 x 750MMProviding and fixing at location a signs made up of Cosign India Pvt Ltd make I sign -display signage with 50mm depth Aluminium extrusion Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15- 20 microns) Flatness & Twist of profile within 1.5 mm / meter length, with 10 years warranty under normal working conditions. Media accomodation depth of 8 mm avialble for pasting on dual lock or strong two way adhesive. M.S fabrication slot of 65 mm depth for internal M.S structure.Media upto 6 mm thickness can be pasted or mounted with help of dual lock tape .assembled totem can be edge lite with help of edge lite modules or back lite with help of back lite modules.CosignTotem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Addinig Two side Dipslay board Size 1500 MM x 750MM X 25MM both side display with ACP Sheet & Reflectfive sign. Complete in all respect including all required for the same.
237	Surface/ wall mounted signs - 457X150X18Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is single sided with1 aluminium profile and 2 plastic endcaps.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help of zinc coated self tapering screws (matching shade of plastic endcaps),media upto 0.5 or 1 mm thickness (paper,vinly) can be inserted in locking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection mediaof Cosign make (or equivalent or as instructed by Architect/EIC) Strato panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of theengineer-in-charge. Complete in all respect including all required for the same.
238	Wall projected - 350X150X30Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is doublele sidedwith 2 aluminium profile joined with strong foam based two way adhesive (3M recommended) and 2 plastic endcaps & 1 aluminium wall mounting bracket.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help ofzinc coated self tapering screws (matching shade of plastic endcaps)media upto 0.5 or 1 mm thickness (paper ,vinly) can be inserted inlocking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection media of Cosign make (or equivalent or as instructed by Architect/EIC) Stratopanels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
239	Surface/ wall mounted signs - 120X109X18Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is single sided with1 aluminium profile and 2 plastic endcaps.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help of zinc coated self tapering screws (matching shade of plastic endcaps),media upto 0.5 or 1 mm thickness (paper,vinly) can be inserted in locking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection mediaof Cosign make (or equivalent or as instructed by Architect/EIC) Strato panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of theengineer-in-charge.Addinig Two side Dipslay board Size 1650 MM x 600MM both side display with ACP Sheet & Reflectfin signages . Complete in all respect including all required for the same.
240	Floor Directory Signage - 1000X2000X15MMProviding a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make (or equivalent or as instructed by Architect/EIC) MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
241	Floor Directory Signage - 762X1500X15MMProviding a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make (or equivalent or as instructed by Architect/EIC) MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
242	Ceiling Hanging - 1200X250X24MMProviding a signs made as using Cosign India make (or equivalent or as instructed by Architect/EIC) Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is double sided 24mm depth profile with media accomodation depth of 5 mm media of ACP acrylic upto 3 mm thickness can be pasted directly on frames or attched on frame with help of dual lock tape.Sign to be fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
243	Surface/ wall mounted signs - 200X150X18MMProviding sign of Cosign make (or equivalent or as instructed by Architect/EIC) Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium grade anodizing (Thickness 15-20 microns) as peinternational standards, with lifetime warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make (or equivalent or as instructed by Architect/EIC) with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
244	Changable snap frames - 451X625X20MMProviding a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign flip profiles with 32 mm visible border.Sign has high quality plastic moulded base with slightly flexible in nature, with wall mountiing screw position hidden beneath the flip profiles. and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
245	Surface/ wall mounted signs - 150X200X18MMProviding a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is single sided with1 aluminium profile and 2 plastic endcaps.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help of zinc coated self tapering screws (matching shade of plastic endcaps),media upto 0.5 or 1 mm thickness (paper,vinly) can be inserted in locking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection mediaof Cosign make (or equivalent or as instructed by Architect/EIC) Strato panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of theengineer-in-charge. Complete in all respect including all required for the same.
246	Surface/ wall mounted signs - 200X150X18Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as perInternational standards, with 10 years warranty under normal working conditions.Sign has profile with curvature .Sign is single sided with1 aluminium profile and 2 plastic endcaps.Sign is including all plastic injection moulded end caps grey or black in shade which are directly screw fitted & help of zinc coated self tapering screws (matching shade of plastic endcaps),media upto 0.5 or 1 mm thickness (paper,vinly) can be inserted in locking slots provided by virtue of design of profiles,0.5 mm polycarbonate sheet for cover or pretection mediaof Cosign make (or equivalent or as instructed by Architect/EIC) Strato panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of theengineer-in-charge. Complete in all respect including all required for the same.
247	Surface/ wall mounted signs - 212X212X18Providing sign of Cosign make (or equivalent or as instructed by Architect/EIC) Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium grade anodizing (Thickness 15-20 microns) as peinternational standards, with lifetime warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make (or equivalent or as instructed by Architect/EIC) with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
248	Surface/ wall mounted signs - 200X150X18Providing sign of Cosign make (or equivalent or as instructed by Architect/EIC) (or equivalent or as instructed by Architect/EIC) Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium grade anodizing (Thickness 15-20 microns) as peinternational standards, with lifetime warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make (or equivalent or as instructed by Architect/EIC) with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
249	Hanging Emergency Exit Sign - 310X225X55MMProviding ready sign & fixing at location a Cosign make (or equivalent or as instructed by Architect/EIC) (or equivalent or as instructed by Architect/EIC) emergency exit sign- illuminated, surface mount (wall or ceiling) Dual sided made up of plastic material , battery backup of 3 hours (180 mins) .Battery life of 300 cycles of charge & discharge Li- ion battery 3.7 Volt, 100 mA, Charge time of 24 hours. Input voltage 220-240 Volt A.C, 50/60 Hz. Viewing distance 30 meter, degree of protection IP20 (rating for protection against solid object upto 12 mm) white light colour full back (white colour) LED illumination with green white coloured graphic inserted on both sides on 0.4 mm PC (sizes, texts, symbols or graphics as per standard safety norms & regulations) graphic options of -left ,right, up staircase down staircase. Test facilty button self test plus auto self test, opreration in maintained and non maintained mode (power saver mode).Sign with 12 months warranty for electric circuit & 6 months warranty for battery. Sign provided with dual mounting arrangement of mounting on wall & celing both ( with flat rigid support/base).Sign is including all connection wires (upto 1 mtr) & high tensile strength zinc coated self tapering screws (4 nos with screw wall plastic packing), installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
250	EXTERNAL SIGN BAORD & LOGOProviding & suppling MS Powder coated Letter with illuminated whtie light with insall on Building Per letter size in any size& 30 MM Emboss letter with back side lite, with powersupply& cablilng on site ,M.S Letter are installed at site ion wall and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
251	TAKTI - 1800X1200MMProviding & fixing in position SS name plateletter as per approved drwaing, SS304matt finish having thickness of 18 gauge / 12 mm thikness , complte job as requite and as per the directio of engineer( name plates are to be fixed over building wall up to floor ground lever hightspecified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.
252	Emergency evacuation plan signages Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make (or equivalent or as instructed by Architect/EIC) MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Complete in all respect including all required for the same.

Also Visit

Tenders

Daman And Diu Tenders

Safety and Security Equipment Tenders

Fire Fighting Equipments Tenders

Fire Fighting Consumable Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Providing Plumbing, Elv, Fire Fighting System, Elevator, Civil Works, Furniture And Signages Works For Government Hospital Marwad In Daman District., Daman-Daman And Diu

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Providing Plumbing, Elv, Fire Fighting System, Elevator, Civil Works, Furniture And Signages Works For Government Hospital Marwad In Daman District., Daman-Daman And Diu

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us