|
| 1 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender documents & all corrigendum/amendments and general condition of contracts before entry/quoting the rates.Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading ofincorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. |
| 2 | Dismantling Asbestos cement (corrugated, semi corrugated, etc ) sheets in roof coverings including ridge complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated or semi corrugated steel sheet 0.50 mm thick (BMT) of any colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (BMT) of any colour having tensile strengthof 550 Mps as in roof ridge, covering/cladding to wall fixed with self tapping screws or \"J\" hookcomplete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description and any places complete all as specified and directed. |
| 6 | M&Lroof trusses (framed/ un framed) for purline, rafter, crane gantries, door frame, rails and fastening and heavy bracket etc ( Beam, tee,angle iron or flat sections) including distance pieces, cleats etc complete all as specified and directed confirming to Fe-290(Gde-E-165) complete all as specified and directed. |
| 7 | S&F band straps, supports, clamps hold fast or plain angle cleats for securing purlins to wood truss rafters and similar small articles conforming to FE-290 Gde E 165 complete all as specified and directed. |
| 8 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of sythetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 9 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 10 | M&L for second class hard wood framed and fixed in scantlings clean swan complete all as specified and directed. |
| 11 | M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of creosote oil complete all as specified and directed. |
| 12 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 13 | S&F for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner \"T\" section of size 38mm x 24mm x 0.40mm thickness, Cross \"T\" of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer AC ceiling boards complete all as specified and directed. |
| 14 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 15 | M&L for Granite (of any type) tiles15-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:6, including grinding and polishing completeall as specified and directed. |
| 16 | M&L for 15-18 mm thick Granite tiles machine cut, in skirting/dado laid over cement mortar and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specified and directed. |
| 17 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 18 | M&L for 75mm thick PCC, (1:4:8) type D2 (using 40mm graded aggregate) as in floors complete all as specifed and as directed |
| 19 | M&L for sand cushioning to receive interlocking tiles incl spreading, levelling in layerscomplete all as specified and directed. |
| 20 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade With GreyCement andpigment complete all as specifeid and directed. |
| 21 | Demolition of (Un reinforced) Cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 22 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection, laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed. |
| 23 | M&L chequered cement concrete tiles 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 24 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 25 | M&L for Vitrified tiles light shade 8-10 mm thick area of each tiles not exc 0.36 Sqm, in floors laid over and including 15mm thick screed bed in CM (1:6) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 26 | M&L for Vitrified tiles light shade 8-10 mm thickarea of each tiles not exc 0.36 Sqm, in skriting/vertical surface laid over and including 10mm thick rendering in CM (1:4) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 27 | M&L for Vitrified tiles light shade 8-10 mm thick area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors laid over and including 15mm thick screed bed in CM (1:6) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 28 | M&L for Vitrified tiles light shade 8-10 mm thickarea of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in skriting/vertical surface laid over and including 10mm thick rendering in CM (1:4) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 29 | M&L for non skid coloured ceramic floor tiles of size of tile exc. 0.11 but n.exc.0.18 sqm each 7 mm thick as in floor laid over and including 15mm thick screed bed in CM (1:6),set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 30 | M&L for colour glazed ceramic wall tiles of size 450x300x6-7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall.cement screed bet set and jointed in neat cement slurry and pointedin white or coloured cement to match complete all as specified and directed. |
| 31 | Taking down chowkhats or frame withshutters without taking of shutters from frames not exc 1.5 Sqm each incl making good disturbed portion complete all as specified and directed. |
| 32 | Taking down chowkhats or frame withshutters without taking of shutters from frames exc 1.5 Sqm but not exc 4.00 sqmeach incl making good disturbed portion including removing to store complete all as specified and directed. |
| 33 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 34 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium fittings such as handles - 02 Nos, 100mm long hinges - 03 Nos, sliding bolt - 01 Nos, tower bolt - 02 Nos in each door, powder coated aluminium snap beading and rubber gasket, screws etc complete all as specified and directed. Note:-Glass shall be measured seprately. |
| 35 | S&F powder coated Anodised aluminium window&ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No complete all as specified and directed. |
| 36 | M&L for 4 mm thick sheet glass ordinary quality and glazingeach pane fixed with neopunerubber gasket in aluminium frame work complete all as specified and directed. |
| 37 | S&F powder coated aluminium sliding window shutters 25 mm thick with frames( consisting of 02 Nos glazed shutters and 01 No gauge shutter) , 3 track sliding shutters, duly fitted with neoprenebeading, glazing clips, locking device, heat absorbing glass 5.0 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95 mm average width of aperture in gauged shutter andpowder coated aluminum grill 4mm dia, 75 x 75mm aperture fixed with standard aluminum beading fixed in outer portion of the chowkat complete all as specified and as directed.. |
| 38 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete size of frame 105mm X 60mm complete all as specifed and as directed. |
| 39 | S&F 35mm thick factory made flush shutters, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkats complete all as specified and as directed. |
| 40 | M&L for preparation of newly painted wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed. |
| 41 | S&F Solid PVCdoor frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawings complete all as specified. |
| 42 | S&F Factory made Solid PVC Moulded Door Shutters with particle board core 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face ,supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 43 | S&F 100 mm Butt hinges, medium weightcold rolled, mild steel and fixed complete all as specified and directed. |
| 44 | S&F150mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed. |
| 45 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed. |
| 46 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 47 | S&F in repairs,25mm dia, fancy type stainless steel drapery rod (curtain rod) complete all as specified and directed. |
| 48 | S&F in repairs, 25mm dia stainless steel, 304 grade decorative type bracket and side cups for curtain rodsfixed with screws complete all as specified and directed. |
| 49 | Taking down wall panelling of any size andany description includingfillets etc and other similar work complete all as specified and directed. |
| 50 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position complete all as specified and directed. |
| 51 | M&L for Plain fillets exc 13 and n exc 25 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed. |
| 52 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufactureres specifications and drawing etc complete all as specified and directed. |
| 53 | Dismantling boarding, any description, fixed in any position not otherwise specifically provided for complete all as specified and directed. |
| 54 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom andsideswithrequired EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 55 | M&L for 4 mm thick aluminium composite panel board of minium tensile strength 4.5 Kg/SqMM fixed in aluminium frame work complete all as specified and directed. |
| 56 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified anddirected. |
| 57 | Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 58 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as per specified and directed. |
| 59 | M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specifed and directed. |
| 60 | M&L 15 mm thick rendering in CM (1:6) onfair faces of brick work or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified and directed. |
| 61 | M&L 15 mm thick rendering in CM (1:4) in two layers (10mm+5mm) onfair faces of brick work or concrete surfaces finished even and smooth without using extra cement with using WPC 3% by weight (for 5mm thickness) of cement on wall complete all as specified and directed.Note:- WPC shall be measured and paid seperately. |
| 62 | Supply only water proofing compound complete all as specified and directed. |
| 63 | M&L forpreparation of new plasteredsurfaces of wall and applying1.5mm thick Birla or equivalent wall putty and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed. |
| 64 | M&L preparation of newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 65 | M&L preparation of newly plastered surfaces of wall and applying two coats of Weather proof Exterior Emulsion paint for camouflage design over a coat of suitable primer on walls complete all as specified and directed. |
| 66 | M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 67 | M&L preparation of old surfaces of wall and applying two coats of exterior weather coat for camouflage design incl necessary scaffolding complete all as specified and directed. |
| 68 | M&L forcomplete removal of existing treatment of internal wall surfaces and applying 1.5mm thick Birla or equivalent wall puttyto oldplastered surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 69 | Dismantling water tanks exc 250 and not exc 500 ltrs capacity and removing to store complete all as specified and directed. |
| 70 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed. |
| 71 | S&F ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 72 | S&F in repair 20mm bore gate valves with iron wheels head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 73 | M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n. exc 10 cm girth in brick wall complete all as specified and directed. |
| 74 | Taking down 15mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 75 | Taking down 20mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 76 | S&F 15mm bore ofmedium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floorscomplete all as specified and directed. |
| 77 | S&F 20mm bore ofmedium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floorscomplete all as specified and directed. |
| 78 | S&F in repair, for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specifed and directed. |
| 79 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 80 | S&F in repair, for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specifed and directed. |
| 81 | S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 82 | S&F in repair PVC (SWR) vent cowl 110mm bore complete all as specifed and directed. |
| 83 | S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specifed and directed. |
| 84 | S&F in repair 75mm bore PVC (SWR) Bend radius any radius complete all as specifed and directed. |
| 85 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 86 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified and directed. |
| 87 | S&F in repair PVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 88 | S&F in repair PVC (SWR) multi floor trap with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 89 | S&F in repairs, sheet glass shelf glass assembly consisting of 5.0mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with chromium plated brass screws complete all as specified and directed. |
| 90 | S&F in repairs, CP toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 91 | S&F in repairs, CP soap dish fixed to wall with screw complete all as specified and directed. |
| 92 | S&F in repairs,18 to 20 mm dia Aluminium anodised tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed. |
| 93 | S&F in repairHealth faucet (ABS Body) mild steel chromiumlated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 94 | S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unionscomplete all as specified and directed. |
| 95 | S&F in repairs, 15 mm bore chromium plated fancy type long boby bib taps with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 96 | S&F in repairs, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed completeall as specified and directed. |
| 97 | S&F in repairs, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washerscomplete all as specified and directed. |
| 98 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm bore complete all as specified and directed. |
| 99 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap(excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and directed. |
| 100 | S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified. |
| 101 | S&F in repairs, Vitreous china, Sqatting pan, \"Orissa Pattern\", size 580 mm x 440 mm white, withintegral foot rests (excluding flushing cistern and flush pipe) and including 100mm bore ‘P’ or ‘S’ trapand provision of cement concrete bedding and connected to existing flush pipe complete all as specified and directed. |
| 102 | S&F in repair vitreous china wash hand basin (flat back) of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 103 | M&L Venetion blinds carpet type foldable complete all as specified and directed. |
| 104 | Name Board of CWE Office of size 10 Ft x 3 Ft complete all as specified and directed. |
| 105 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation .etc in soft/loose soil complete all as specified and directed. |
| 106 | M&L for Cement concrete, (1:4:8) type D2 (using40mm graded aggregate) as in foundations complete all as specified and as directed. |
| 107 | Returning, filling in including spreading ,leveling ,waterring and well ramming in layers not exc 25cm with excaveted soil as directed. |
| 108 | Removing excavation material/soil n .exc. 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed |
| 109 | M&L for RCC M-25(design mix) (using 20 mm graded aggregate) as in foundation, footing, foundation beam, plinth beam, base for columns, etc. complete all as specifiedand as directed Note:-Reinforcement shall bemeasured and paid separately. |
| 110 | M&L for RCC M-25(design mix) (using 20 mm graded aggregate) as in columns, etc. complete all as specifiedand as directed Note:-Reinforcement shall bemeasured and paid separately. |
| 111 | M&L forRCC M-25(design mix) (using 20 mm graded aggregate) as in roof beams, cantilevers, bressumm ers, lintels over 1.5m span complete all as specifiedand as directed. Note:-Reinforcement shall bemeasured and paid separately. |
| 112 | M&L forRCC M-25(design mix) (using 20 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified anddirected. |
| 113 | S&F TMT bar Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified anddirected. |
| 114 | S&F TMT bar Mild steel bars 6 to 8 mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified anddirected. |
| 115 | Ditto as Ser no 113.00 above, but 5mm dia and over upto and including10mm dia in stirrups, spacers and binders complete all as specified anddirected. |
| 116 | M&L form work to sides of concrete foundation, footings, bases of columns ,sides and sofit of foundation and plinth beam and similar works etc complete all as specified anddirected. |
| 117 | M&L form work to sides of pillars, posts, columns, etc complete all as specified anddirected. |
| 118 | M&L for formwork to sides and soffits of roof beams, lintel beam, gable beam complete all as specified and directed. |
| 119 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs,shleves landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 120 | M&L for use and waste form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs, sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but not exc. 20 cm wide for rough finished surfaces of concrete complete all as specified and directed. |
| 121 | S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitablefor door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 122 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping/kerb stone etc complete all as specified and as directed. |
| 123 | M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed. |
| 124 | S&F in repair angular two way angle cock with wall flange, 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 125 | S&F in repair counter type oval shaped vitreous china wash hand basin (flat back) of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 126 | M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed.Notes:- WPC shall be measured and paid seperately. |
| 127 | M&L for 3mm thick APP modified prefabricated membrane weight not less than 3.0 Kg/Sqm water proof membrane reinforced with non-wooven polyster (wt. not less than 150 gms/sqm) land on primed surface by forcedwater proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over a tack coat of industrial coat of primer as per manufacturer\"s instructions of APP modified membrane sheet complete all as specified and directed. |
| 128 | S&F 4 mm thick one side frosted sheet glass ordinary quality and glazing in square n.exc 0.5sqm in each pane fixed with neopune rubber gasket in aluminium frame complete all as specified and directed. |
| 129 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets, removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc complete all as specified and directed. |
| 130 | M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLHS type drawn through and including PVC Conduit(ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm (nominalarea) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other endas per site requirement and complete all as specified and directed for the following:- (a) One light point or one fan point controlled by one switch with cables 1.5 sq. mm size |
| 131 | All as per ser item No. 129.00 above here in before but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed. |
| 132 | All as per ser item No. 129.00 here in before but for One 5 Amp 5 pin socket outlet point on independent board complete all as specified and directed. |
| 133 | All as per ser item No. 129.00 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed. |
| 134 | All as per ser item No. 129.00 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes complete all as specified and directed. |
| 135 | S&F in replacement switch modular type 6 Amps one moduleAC 230 Volts white finish complete all as specified and directed. |
| 136 | S&F in replacement of Socket, 6A - 2/3 pin combined 2 module multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 137 | S&F in replacement call bell, AC 230 volts, single pole complete all as specified and directed. |
| 138 | S&F in replacement of modular socket 16A, 6 pin, 3 module 230V, AC white/ivory finish complete all as specified and directed. |
| 139 | S&F in replacement switch modular type 16 Amps one module AC, 230 volts complete all as specified and directed. |
| 140 | S&F modular bell push, flush type 01 module, 5 Amp single pole, 230 volts white finish complete all as specified and directed. |
| 141 | S&F in replacement ofmodular white cover plate with frame, 1 module with flush box complete all as specified and directed. |
| 142 | S&F in replacement ofmodular white cover plate with frame, 3 module with flush box complete all as specified and directed. |
| 143 | S&F in replacement of modular white cover plate with frame, 4 module with flush box complete all as specified and directed. |
| 144 | S&F in replacement ofmodular white cover plate with frame, 6 module with flush box complete all as specified and directed. |
| 145 | S&F in replacement ofmodular white cover plate with frame, 8 module with flush box complete all as specified and directed. |
| 146 | S&F in replacement energy efficient Street/ Roadway/Building Security Luminaire LED fitting upto 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement complete all as specified and directed. |
| 147 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 148 | S&F in replacement LED panel light 36 watt efficient LED recessed luminaire 2 ft x 2 ft (>100 Lumen/Watt) to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination for armstrong/ grid ceiling or similar ceiling mounting system with concealed complete prewied complete as per site requirement and complete all as specified and directed.Note:- Rate for removing of existing unservieable old luminaire is deem to be included in this item rates. |
| 149 | S&F in replacement surface and wall mounted LED batten 10 watt - 2Ft White with Aluminum housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt complete all as specified and directed. |
| 150 | S&F in replacement stepped type electronic fan regulator modular type 2 moudle on the existing phenolic laminated sheet etc. complete all as specified and directed. |
| 151 | S&F in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish complete all as specified and directed. |
| 152 | S&F in replacemant of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 06 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 06 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.Note:-(i)Two runs of cables and one run of continuous earting cable drawn in conduit/ casing and caping will be measured as one length of sub main with colour code Red Black and Green. (ii)PVC conduit / casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 153 | S&F in replacement SPN distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB\"s 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways complete all as specified and directed. |
| 154 | S&F in replacement SPN distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB\"s 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways complete all as specified and directed. |
| 155 | S&F sheet metal encloures with plug socket single pole and neutal with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified and directed. |
| 156 | S&F in replacement MCB SPN/DP 32 Amp rating 240V, 10KA \"C\" curve complete with connection testing and commissioning complete all as specified and directed. |
| 157 | S&F in replacement MCB SP 6 to 32 Amp rating 240V, 10KA \"C\" curve complete with connection testing and commissioning complete all as specified and directed. |
| 158 | M&L in replacement of Earthing complete withgalvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPMweightnot less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm,excavation and earth work in anytype of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire-mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete allto as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion. |
| 159 | S&F sheet metal enclosure (factory made), VTPN Vertical Distribution Boards, IP-43 & IP-44 protection with MCCB\"s 160A as as incomer, Double Door, 4 way NO of modules I/C XTI 160, O/G 12 nos with 250 Amps rated copper busbarModle No I-VTPN 04 WAY XTI/IC MD DB Product code 1SYM071604C0001 complete all as specified and directed. |
| 160 | S&F MCCB 4 Pole, 415 V, Adjustable type, 160Amps with breaking capacity 36 KA complete all as specified and directed. |
