Tender For Inviting Annual Tender For Supplying Road Safety Equipments, Rubber Speed Breaker, Sign Board, Thermoplastic Paint, Cats Eye, Road Divider For The One Year Period From 2025-2026 For Chopda Municipal Council, Chopda. - Inviting Annual Tender For, Chopda-Maharashtra
TDR : 48536670
Tender Notice
BOQ
Expired
Chopda
Maharashtra
Tender For Inviting Annual Tender For Supplying Road Safety Equipments, Rubber Speed Breaker, Sign Board, Thermoplastic Paint, Cats Eye, Road Divider For The One Year Period From 2025-2026 For Chopda Municipal Council, Chopda. - Inviting Annual Tender For
Name of Work: Inviting annual tender for Supplying road safety equipments, Rubber Speed breaker, sign board, thermoplastic paint, Cat\"s eye, road divider for the one year period from 2025-2026for chopda municipal council, Chopda.
Sl. No.
Item Description
1
Inviting annual tender for Supplying road safety equipments, Rubber Speed breaker, sign board, thermoplastic paint, Cat\"s eye, road divider for the one year period from 2025-2026for chopda municipal council, Chopda.
2
Speed breakers plastic speed bump (abs) dimension: 350mm x 250mm x 50mm. Available in black and yellow color that enhance vision during night, and other low visibility conditions. Offer high skid resistance. Ensure proper drainage during rainy weather Reflectors on both sides
3
Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 square meter made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.
4
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.B & C SSR-2019-20, I.No. 6.12a
5
Supplying and Fixing of Molded Shank Raised Pavement Markers /Cat\"s Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retroreflectance of the reflecting panel, to the Engineer. B & C SSR-2019-20, I.No.6.09
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
