Tender For Construction Of Academic Block At Government Degree College, Burtuk In Gangtok District., Gangtok-Sikkim

TDR : 48525086

Tender Notice
BOQ

Expired

Gangtok , Sikkim

Tender Brief : Tender For Construction Of Academic Block At Government Degree College, Burtuk In Gangtok District.

Document Fees
₹ 100000 /-

EMD
₹ 2091787.0 /-

Tender Value
₹ 8.36 Crore /-

Submission Date
21-04-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Building
2	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means)
4	Providing and Laying in position cement concrete of 1:2:4mix( 1 cement, 2 coarse sand, 4 stone aggregate of 20mm and down size) including compacting curing etc all complete.
5	Providing and laying. coarse Rubble Stone Masonry in 1:3:6 c.c. ( 1 cement, 3 sand, 6 clean hard graded stone chips of size 40mm and down) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down), and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials.
6	Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)
7	S/B/B and placing in position of steel reinforcement as per design,specification and direction of Engineer-in-charge.
8	Tor Steel:-
9	Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state)
10	Foundation Works
11	Beam, lintels, girders, brersumers and cantilevers.
12	Square columns.
13	Slab
14	Lift Walls
15	Filling inside plinth in building works with23cm layers, consolidated to 15cm including watering, ramming etc, all complete.
16	Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
17	Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. 1:3 mix
18	Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
19	Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
20	Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
21	Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
22	Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
23	Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
24	Providing, fitting and fixing of undressed sal timberin all types of frames complete. With imported timber from outside the state.
25	Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.Doors38 mm
26	P/F/F of half paneled and half glazed (4 mm thick water proof ply of modi guard or equivalent) as per the thickness specified using champ wood or equivalent including steel butt hinges with necessaryscrews complete. 38mm
27	Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
28	Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm andsingle glass pane glazing beadof appropriate dimension. (Area of window upto 0.75 sqm.)
29	Windows & Ventilators
30	Providing, fitting & fixing sliding door bolts of size 300mm x 16mm with nuts and screws etc. complete.
31	Brass (Chromium plated)
32	Providing, fitting & fixing Tower bolts 300mm x 10 mm with necessary screws etc. complete.
33	Providing, fitting & fixing Handles 125 mm size with necessary screws etc. complete.
34	Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete
35	Providing/ fitting and fixing Stone coated Steel roofing (Decra) tiles .
36	Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
37	Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete.
38	Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes.
39	Providing / Fitting / Fixing 25 mm thick false ceiling/ paneling of silver fir inwooden frames of timber equivalent to Katus or pakha saajor equivalent excluding the cost of polishing and including cost of one coat priming onunexposed frame all complete.With imported timber .
40	Providing, fitting, fixing of 24 BWGGP sheet roofing by making corrugation of50mmx50mm x50mm on bothside with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete.
41	Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete( Both in Internal & External surface)
42	Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar (1cement, 5 coarse sand) including centering, lining and curing etc as per the direction of Engineer in Charge, all complete.
43	Chiesel dressed stone in facade
44	Providing and painting with Plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
45	Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.
46	Providing and French spirit polishing two or more coats including cleaning of the surface to make smooth and free from dirt and dust and sand papering etc. on new look complete.
47	Providing, fitting and fixing in position collapsible steel gatewith vertical channel (20x10x2)mm and braced with flat iron diagonals (20 x 5)mm size with top and bottom rail of T-iron (40x40x6)mm with 40mm dia steel pulley complete with bolts, nuts, locking arrangements, stoppers and handles including applying of priming coat of approved steel primer as per the direction of Engineer - in- Chargeall complete:
48	Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete.
49	Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface.
50	Provision for providing fitting and fixing of Sikkimese Vernacular style and feature in traditional motiveand painting all complete as per architectural drawing and engineer in charge. (Sikkimese Vernacular Style)
51	Providing box drain of 60 cm (ht) x 45 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm (road side) with1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones, complete as per the direction of theEngineer-in-Charge.
52	Provision for Landscaping, Decorative Designs, yard Development and other unforseen items (to be paid as per actual)
53	Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.
54	Provision for providing Emergency Staircase & Fire Exits, fire Extinguishers, land scaping and other safety equipments. (to be paid as per actual).
55	Provision for Providing Fitting and Installation ofAcoustic Sound Control andSound Proof System Other Accessories all Complete as per the direction of engineer in charge.
56	Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete
57	Carriages of Stock materialsto work site :-
58	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
59	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 10kms
60	Carriages of Sand up to work site.:-
61	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
62	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 40kms
63	Carriage of Stone up to work site.:-
64	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
65	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 40kms
66	SITE LEVELLING & PROTECTIVE WORKS
67	Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead up to 1000 meters.
68	Earthwork in excavation in all kinds of soils in foundation trenches including dressing of all sides,watering and ramming including disposal of excavated earth up to 30m lead and lift up to 1.5m, disposed earth to be levelled and neatly dressed as per the direction of Engineer-in-Charge.
69	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete.
70	Providing and Laying in position cement concrete of 1:2:4mix( 1 cement, 2 coarse sand, 4 stone aggregate of 20mm and down size) including compacting curing etc all complete.
71	Providing and Laying Chequerstiles in on flooring over 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
72	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
73	Carriage of stock materials
74	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
75	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 10kms
76	Carriage of Sand
77	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
78	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 40kms
79	Carriage of Stone
80	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
81	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 40kms
82	Thowing of excavated earth from the site at proper government approved dumping yard.
83	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
84	Cost of Haulage Excluding Loading and Unloading on surfaced road.
85	Hiring for dumping of excavated earth at government approved dumping yard.
86	Provision for shifting of water pipeline, electric poles, wire and sewrage line . (to be paid as per actual).
87	Provision for providing Lift/Elevator
88	Water Supply
89	Jungle clearance for laying of G.I. Pipe etc all complete.
90	Provision for construction of platforms for tanks in 1:3:6 cc over stone soling on sizes and location as per the direction of the Engineer in Charge, all complete:-
91	Taking connection from P.H.E.D. The designated water supply .
92	Providing, Fitting and fixing GI pipe of medium class,(excluding trenching, refilling, compactingandthe cost of fittings) all complete
93	20mm dia
94	Providing, Fitting and fixing GI pipe of medium class,(excluding trenching, refilling, compactingandthe cost of fittings) all complete
95	15 mm dia GI PIPE
96	Provisions for fittings etc all complete:- For 25mm dia
97	Elbow
98	Socket
99	Plugs
100	Shortpiece
101	Providing, Fitting and fixing brass fittings of approved quality and size complete:
102	GATE WAY VALVE20MM DIA
103	Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT)
104	BIB COCK15 MM DIA
105	ANGULAR STOP COCK15 MM DIA
106	Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent) 2000 LITERS CAPACITY.
107	Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats:
108	SANITARYFITTINGS.
109	Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European Bidets standard CAT NO 30001
110	Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Indian type) 530mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20mm overflow pipe, cutting and making good the wall and floor etc complete. Long type or Orrisa type pan. HINDWARE CAT NO20004
111	Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltrautomatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete: Range of 1 Urinal basin.
112	Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.
113	Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions,complete including cutting and making good the walls wherever required. HINDWARE
114	One wash basin with one pillar cock.(63 cm x 45 cm)
115	Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.(100mm dia. PRINCE/SUPREME or equivalent soil pipe)
116	Down water pipe
117	Bends
118	Offset
119	Provision for the sewrage connection charge and other fittings items, as per the direction of the Engineer in Charge, all complete:-
120	FURNITURES
121	SECTION A :-INTERNAL WIRING.
122	SECTION B:-SWITCH,SOCKET & ITS ACCESSORIES.
123	SECTION C:-LIGHT FITTINGS & ITS ACCESSORIES.
124	SECTION D:-DISTRIBUTION SYSTEM & EARTHING.
125	PROVISION FOR SERVICE CONNECTION,METERING ETC.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Sikkim Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Academic Block At Government Degree College, Burtuk In Gangtok District., Gangtok-Sikkim

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Building
2	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means)
4	Providing and Laying in position cement concrete of 1:2:4mix( 1 cement, 2 coarse sand, 4 stone aggregate of 20mm and down size) including compacting curing etc all complete.
5	Providing and laying. coarse Rubble Stone Masonry in 1:3:6 c.c. ( 1 cement, 3 sand, 6 clean hard graded stone chips of size 40mm and down) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down), and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials.
6	Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)
7	S/B/B and placing in position of steel reinforcement as per design,specification and direction of Engineer-in-charge.
8	Tor Steel:-
9	Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state)
10	Foundation Works
11	Beam, lintels, girders, brersumers and cantilevers.
12	Square columns.
13	Slab
14	Lift Walls
15	Filling inside plinth in building works with23cm layers, consolidated to 15cm including watering, ramming etc, all complete.
16	Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
17	Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. 1:3 mix
18	Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
19	Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
20	Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
21	Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
22	Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
23	Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
24	Providing, fitting and fixing of undressed sal timberin all types of frames complete. With imported timber from outside the state.
25	Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.Doors38 mm
26	P/F/F of half paneled and half glazed (4 mm thick water proof ply of modi guard or equivalent) as per the thickness specified using champ wood or equivalent including steel butt hinges with necessaryscrews complete. 38mm
27	Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
28	Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm andsingle glass pane glazing beadof appropriate dimension. (Area of window upto 0.75 sqm.)
29	Windows & Ventilators
30	Providing, fitting & fixing sliding door bolts of size 300mm x 16mm with nuts and screws etc. complete.
31	Brass (Chromium plated)
32	Providing, fitting & fixing Tower bolts 300mm x 10 mm with necessary screws etc. complete.
33	Providing, fitting & fixing Handles 125 mm size with necessary screws etc. complete.
34	Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete
35	Providing/ fitting and fixing Stone coated Steel roofing (Decra) tiles .
36	Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
37	Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete.
38	Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes.
39	Providing / Fitting / Fixing 25 mm thick false ceiling/ paneling of silver fir inwooden frames of timber equivalent to Katus or pakha saajor equivalent excluding the cost of polishing and including cost of one coat priming onunexposed frame all complete.With imported timber .
40	Providing, fitting, fixing of 24 BWGGP sheet roofing by making corrugation of50mmx50mm x50mm on bothside with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete.
41	Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete( Both in Internal & External surface)
42	Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard selected stone in 1:5 Cement Mortar (1cement, 5 coarse sand) including centering, lining and curing etc as per the direction of Engineer in Charge, all complete.
43	Chiesel dressed stone in facade
44	Providing and painting with Plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
45	Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.
46	Providing and French spirit polishing two or more coats including cleaning of the surface to make smooth and free from dirt and dust and sand papering etc. on new look complete.
47	Providing, fitting and fixing in position collapsible steel gatewith vertical channel (20x10x2)mm and braced with flat iron diagonals (20 x 5)mm size with top and bottom rail of T-iron (40x40x6)mm with 40mm dia steel pulley complete with bolts, nuts, locking arrangements, stoppers and handles including applying of priming coat of approved steel primer as per the direction of Engineer - in- Chargeall complete:
48	Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete.
49	Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface.
50	Provision for providing fitting and fixing of Sikkimese Vernacular style and feature in traditional motiveand painting all complete as per architectural drawing and engineer in charge. (Sikkimese Vernacular Style)
51	Providing box drain of 60 cm (ht) x 45 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm (road side) with1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones, complete as per the direction of theEngineer-in-Charge.
52	Provision for Landscaping, Decorative Designs, yard Development and other unforseen items (to be paid as per actual)
53	Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.
54	Provision for providing Emergency Staircase & Fire Exits, fire Extinguishers, land scaping and other safety equipments. (to be paid as per actual).
55	Provision for Providing Fitting and Installation ofAcoustic Sound Control andSound Proof System Other Accessories all Complete as per the direction of engineer in charge.
56	Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete
57	Carriages of Stock materialsto work site :-
58	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
59	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 10kms
60	Carriages of Sand up to work site.:-
61	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
62	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 40kms
63	Carriage of Stone up to work site.:-
64	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
65	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 40kms
66	SITE LEVELLING & PROTECTIVE WORKS
67	Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead up to 1000 meters.
68	Earthwork in excavation in all kinds of soils in foundation trenches including dressing of all sides,watering and ramming including disposal of excavated earth up to 30m lead and lift up to 1.5m, disposed earth to be levelled and neatly dressed as per the direction of Engineer-in-Charge.
69	Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete.
70	Providing and Laying in position cement concrete of 1:2:4mix( 1 cement, 2 coarse sand, 4 stone aggregate of 20mm and down size) including compacting curing etc all complete.
71	Providing and Laying Chequerstiles in on flooring over 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
72	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
73	Carriage of stock materials
74	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
75	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 10kms
76	Carriage of Sand
77	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
78	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 40kms
79	Carriage of Stone
80	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
81	Cost of Haulage Excluding Loading and Unloading on surfaced road. For 40kms
82	Thowing of excavated earth from the site at proper government approved dumping yard.
83	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
84	Cost of Haulage Excluding Loading and Unloading on surfaced road.
85	Hiring for dumping of excavated earth at government approved dumping yard.
86	Provision for shifting of water pipeline, electric poles, wire and sewrage line . (to be paid as per actual).
87	Provision for providing Lift/Elevator
88	Water Supply
89	Jungle clearance for laying of G.I. Pipe etc all complete.
90	Provision for construction of platforms for tanks in 1:3:6 cc over stone soling on sizes and location as per the direction of the Engineer in Charge, all complete:-
91	Taking connection from P.H.E.D. The designated water supply .
92	Providing, Fitting and fixing GI pipe of medium class,(excluding trenching, refilling, compactingandthe cost of fittings) all complete
93	20mm dia
94	Providing, Fitting and fixing GI pipe of medium class,(excluding trenching, refilling, compactingandthe cost of fittings) all complete
95	15 mm dia GI PIPE
96	Provisions for fittings etc all complete:- For 25mm dia
97	Elbow
98	Socket
99	Plugs
100	Shortpiece
101	Providing, Fitting and fixing brass fittings of approved quality and size complete:
102	GATE WAY VALVE20MM DIA
103	Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT)
104	BIB COCK15 MM DIA
105	ANGULAR STOP COCK15 MM DIA
106	Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent) 2000 LITERS CAPACITY.
107	Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats:
108	SANITARYFITTINGS.
109	Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European Bidets standard CAT NO 30001
110	Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Indian type) 530mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20mm overflow pipe, cutting and making good the wall and floor etc complete. Long type or Orrisa type pan. HINDWARE CAT NO20004
111	Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltrautomatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete: Range of 1 Urinal basin.
112	Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.
113	Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions,complete including cutting and making good the walls wherever required. HINDWARE
114	One wash basin with one pillar cock.(63 cm x 45 cm)
115	Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.(100mm dia. PRINCE/SUPREME or equivalent soil pipe)
116	Down water pipe
117	Bends
118	Offset
119	Provision for the sewrage connection charge and other fittings items, as per the direction of the Engineer in Charge, all complete:-
120	FURNITURES
121	SECTION A :-INTERNAL WIRING.
122	SECTION B:-SWITCH,SOCKET & ITS ACCESSORIES.
123	SECTION C:-LIGHT FITTINGS & ITS ACCESSORIES.
124	SECTION D:-DISTRIBUTION SYSTEM & EARTHING.
125	PROVISION FOR SERVICE CONNECTION,METERING ETC.

Tender For Construction Of Academic Block At Government Degree College, Burtuk In Gangtok District., Gangtok-Sikkim

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us