|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : a) Of area 3 sq. metres and below |
| 2 | Providing and fixing in position factory made precast RCC M-40 door and window frame fixing with hold fast embedded in 1:3:6 concrete block having excellent smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm C/C and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S. galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for recieving sliding door bolts and tower bolt etc all complete, as per the direction of Engineer in charge. The frame shall be measured in running metre correct to two places of decimal. a) Door frame 100 mmx 60 mm |
| 3 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. a) 30 mm thick plain PVC door shutters. |
| 4 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :a) 300x16 mm |
| 5 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. a)Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides. |
| 6 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. a) One coat. |
| 7 | b) Two coats |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :a) One or more coats on old work. |
| 9 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 10 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. a) 10 litre capacity - White |
| 11 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : a) White solid plastic seat with lid |
| 12 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :a) Rectangular shape 453x357 mm |
| 13 | Providing and fixing uplasticised PVC connection pipe with brass unions :a) 45 cm lengthi) 15 mm nominal bore |
| 14 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :a) 100 mm diameter |
| 15 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:a)15 mm nominal bore. |
| 16 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :a)15mm nominal bore |
| 17 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. a) 110 mm diameter |
| 18 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°a)110 mm bend |
| 19 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : a) For fixed portion1)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 20 | b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 1) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): a) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 22 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : a) Kiln seasoned and chemically treated hollock wood. 50x20 mm |
| 23 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on walla) 20 mm nominal outer dia. Pipes. |
| 26 | b) 25 mm nominal outer dia .Pipes. |
| 27 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : a) 20 mm nominal bore |
| 28 | b) 25 mm nominal bore |
| 29 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. a)For thickness of tiles 10 mm to 25 mm |
| 30 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in all colours, shades, except White, Ivory, Rey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4(1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. |
| 31 | Repairs to aluminium windowby removing the windowfrom its position,repairing of shutters to ensure proper fixity oor styles & refixing the door shutter to its original position etc. all complete as directed by Engineer-in-charge. a) Window of sie up to 1.50 x1.20 |
| 32 | Cleaning of floor trapincluding removing the grating ,removing thechoke up for smooth flow of bath room and WC waste pipe line from inside the building & refixing the grating so as to make it opertional etc all complete as directed by Engineer in Charge. |
| 33 | Providing and fixing Velcro mosquito net of M/S saint Gobin or equivalent on wooden beading including cutting the net to required shape,stching the |
| 34 | Providing and fixing C.P. brass pillar cock of approved quality conforming to IS:8931: a)15 mm nominal bore. |
| 35 | Removing Stains/ dirt layer accumulatedontoliet daddo / floors and sanitary installations etc with following set of operations and as directed by Engineer-In-Charge: i) Spraywash the entire surface with water and immediately apply benzalkonium chloride based disinfectants (Harpic or equivalent)over entire cleaning area and rub with Nylon bristle brushes till the disinfectant sprayed unifomly and light stain layer get dissolved. ii) Spraywash the entire surface with water after 15 minutes to remove foul smell and improve hygine. iii) Apply thick paste of Borax powder with brush /sponge directly on dirt stain patches or spraying of powder in inaccessible cocners and rubbing with long handle brush. iv) Keep the stains untreated and wait for one hour to percolate solution into tough stains by chemical action. v) Rub with Nylon bristle brush/metal scrapper/razor blades as required till stain layer get loosened and surface becomes clean and again spray wash the surface with profuse warter. vi) Wipe out water first with broom and then with dry wiping cloth/cotton . a) Toilet block of size up to1.50x 2.10 with 1 W.C,1 W.B including floor tiles and wall tiles. |
| 36 | Cleaning ofinspection suits (excluding toilets) & kitchen including cleaning of floorby using detergent powder rubbingwith wire brush,cleaning of doors ,windows,fans and all furniture items by dusting with cottonetc.complete as per direction of the Engineer-In-Charg. |
| 37 | P/F CP brass health faucet of approved make ( Parryware/Plumber or equivalent )including flexible pipe and wall hook & CP tee etc complete as per direction of Engineer -in- charge. |
| 38 | Shifting of unwanted/damagedfurniture items,TV sets,A.C sets,etc from IQ area and stacking within 50 metre leadsas directed by Engineer in charge. |
| 39 | Credit for the recovered items after dismantling or replacing the damaged items etc. a) CP brass / bright brass / Gun metal fittings. |
| 40 | b) PTMT & Plastic fittings, tanks & PVC sheets |
| 41 | c) Aluminium material. |
| 42 | d) GI pipes. |
| 43 | e) Unserviceable PVC tanks up to 1000 lit capacity. |
