Tender For Under District Lucknow, Maintenance Of Residential Building At Tehsil Bakshi Ka Talab, Lot No 1 - Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete As per DSR 13.88 3 Providing and laying birla white wall care putty of avg. thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (13.80) 4 Finishing with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work ( Two or more coats applied @ 1.43 Ltr./10 Sqm. over and including bsae coat of water proofing cement paint applied @ 2.20 Kg/10 Sqm.)(Apex ultima, weather coat all quard) Asian, Berger As per DAR 13.47.1 5 12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand) etc (13.4.1) 6 Dismantling cement concrete or brick or granotithic floors,including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge with a distance of 60 meters(200ft).(15.23.2) 7 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(11.37) 8 P/F 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer-in-Charge in skirting, riser of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete(8.31) 9 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit with modular switch,modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as required Group B (1.3.2) 10 same as item no.178(b) for 5amp plug point with flush type switch and socket etc.As per SI no.178c+187c 11 S/F of power plug wiyh 20A/250V flush type modular switch and 5pin 20A/250v flush type modular socket switch on concealed M.S. box including supply of all material,labour T&P etc.required for proper completion of work.As per SI No.1139(A) 12 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,single core cable in surface/recessed steel conduit as required. (2x2.5 sq.mm + 1x2.5 sqmm earth wire) (1.7.2) 13 Wiring for light/power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 1 No. 4sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required (1.50) 14 Supply and wiring of submain 2 number 10 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 6 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. UPPWD SOR ELECTRICAL 223(C) 15 Supply and fixing following way,horizontal type three pole and neutral,sheet steel,MCB distribution board,415 V,on surface/recess,complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, inter connections,powder painted including earthing etc as required (But without MCB/RCCB/Isolator) 4 way (4+12), double door (2.4.1) 16 S/F of 6Amp to 32 Amp MCB (10KA)C curve As per SI NO.1002 CAT A 17 S/F following rating,double pole,240 V isolator in the existing MCB DB complete with connections,testing and commissioning etc as required 40 A (2.12.1) 18 supply fixing of LED tubelight batten fitting suitable for up to 1x22 watt LED tube light on surface complete in all respect.As per si no.1413 CAT-AAA 19 P/F vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C.pan) with seat & lidfixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets 40 mm flush bend 20 mm over flow pipe with specials of stanDSRd make and mosquito proof coupling of approved muncipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherrever required: White vitreous china dual purpose W/C pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. As per DSR 17.68.1 20 Providing and Fixing of wash hand basin with C.I. bracket 15 mm C.P. brass taps 32 mm c.p brass waste of stanDSRd pattarn including of fitting and brackrts cutting and making good walls whaerever require. 550x400 mm size of whitevetreous china flate back wash basin with single 15mm c.p. brass pillar tap. As per DSR 17.7.4 21 Providing and Fixing of P.V.C. waste pipefor sink or wash basinh including P.V.C. waste fittings complete 32mm dia/40mm dia. As per DSR 17.28.1.1 22 Providing and Fixing 600x450 mm beveled edge mirror of superior glass (or approved quality)complete with 5mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. DSR 17.31 23 Supply and fixing of Brass bib cock heavy quality 15 mm dia 200 gms As per DSR 18.49.1 24 Supply and fixing of Brass Stop cock 15 mm dia 200 gms As per DSR 18.52.1 25 Supply and fixing of C.P. Pillar cock 15 mm dia with brass spindle As per DSR. 18.53.1 26 P/L of 15 mm dia C.P.V.C.pipe As per DSR 18.7.1 27 P/L of 20 mm dia C.P.V.C.pipe As per DSR 18.7.2 28 P/L of 25 mm dia C.P.V.C.pipe As per DSR 18.7.3 29 Providing and placing on terrace (at all floor lvl.) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Rate as per DSR 18.48 30 P/F C.I.jali round 100m dia Rate as per Si.no.93-a 31 Supply and fixing of 100mm dia CPVC Pipe (page no.64, clause 8644) 32 P/F P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete 10 litre capacity white As per DSR 17.18.1
